Specifications

96
4.3 WIRELESS & NETWORKS Settings
You can configure and manage settings relating to Wi-Fi, Bluetooth, mobile networks, and USB
connections to networks and devices.
You can also configure the connections between your tablet and virtual private networks (VPNs).
connect to the Internet using another device via the tablet data communication, or turn off all
wireless communications by switching to Airplane mode.
Table 4.2
Item Description
Wi-Fi Enable/disable Wi-Fi.
Ethernet IP setting from cradle Enable/disable IP setting of the cradle.
Cradle IP Specify the IP address of the cradle.
Tablet IP Specify the IP address of the terminal.
Bluetooth Enable/disable Bluetooth.
Data Usage Allow you to check data communication settings and usage.
More… Airplane mode Enable/disable Airplane mode
VPN Configure VPN settings.
Tethering and portable hotspot Configure tethering settings including the access point and
communication method.
NFC Enable/disable NFC.
Android beam Configure settings for data send/receive operations between
NFC-enabled terminals.
Wi-Fi Direct Enable/disable Wi-Fi Direct.
Mobile networks
(Note)
Configure mobile network settings.
Note: You can use it on a WAN model.
Mobile networks
Table 4.3
Item Description
Mobile networks
Data enabled Enable/disable data access over Mobile network.
Data roaming
(Note)
Enable/disable to connect to data services when roaming.
Access Point Names Edit and select access point.
See “Access Point Names setting”
for its detail.
Use only 2G networks
(Note)
Enable/disable to use only 2G networks.
Network operators Select a network operator.
Note: This setting is enabled on WAN (3G) model.