Specifications

27
2.1.5. Buzzer
Basic Specifications
The buzzer can be used to output various sounds such as scanning confirmation, alarm, warning
and any other available sounds.
The sounds have the following four attributes and default values.
Table. 2.10
Frequency
(Hz)
Time
(millisecond)
Individual Mute Attribute
Alarm sound 3500 150 ON or OFF B_ALARM
Warning sound 3000 100 ON or OFF B_WARNING
Scan end sound 3300 75 ON or OFF B_SCANEND
User designated sound -- -- ON or OFF B_USERDEF
Setting Volume
The control panel can be used to set up volume in three grades from loud, medium and low and
ON/OFF of mute. Setting the volume is also possible using the Common Device Control Library
in application.