User manual - Mobile Picture & Video Player

- 10 -
Mobile Picture & Video Player with Camera
Stop Action Images
Stop action recording lets you record a series of images that effectively break
action into a series of segments. The number of images recorded when you press
the button depends on the image size, as shown in the table below.
Image Size Number of Images
VGA (640 x 480) 2
1/4 VGA (320 x 240) 8
1/9 VGA (212 x 160) 12
1/16 VGA (160 x 120) 32
The image recording procedure is identical to that under "Recording Snapshots"
on page 8, except that in step 3 you press the button and enter the Stop
Action Mode instead of the button.
///// Note /////
•
In the Stop Action Mode, recording continues and the image on the display
remains unchanged until all the images are recorded.
•
After image recording is complete, a dialog appears telling you that the images
are being stored in memory.
•
You can specify how many images are recorded per second. See "Making
Record Settings" on page 14 for details.
Using Timer Recording
You can set a timer for snapshot and stop action recording so the record operation
starts after 10 seconds have passed. To use the timer, tap the button on the
control panel. This enables the timer, which is indicated by the timer button chang-
ing to .
•
The timer time counts down on the display.
•
You can interrupt the timer countdown by tapping the button or chang-
ing to another screen.
•
To cancel timer operation, tap the button so it changes to .