User manual - Mobile Picture & Video Player

- 6 -
Mobile Picture & Video Player with Camera
Recording
Mobile Picture & Video Player with Camera lets you record both snapshots and mov-
ies. You can also record a series of stop action snapshots over a specific period.
Getting Ready
Check the following points before trying to record.
•
Make sure the Digital Camera Card is correctly installed into the card slot of
your CASSIOPEIA. See the separate documentation that comes with the Digital
Camera Card for details about installation.
•
See the separate documentation that comes with the Digital Camera Card for
information about adjusting the focus range, rotating the lens, and other Digital
Camera Card operations.
•
Check the remaining power levels of the main battery and back up battery of
your CASSIOPEIA. If they are low, replace or recharge them.
Precautions
Note the following important precautions whenever recording.
•
Never tap the display screen of your CASSIOPEIA, turn its power off, or press
any of its buttons to start up another application under any of the following
conditions.
• When recording is in progress, which is indicated by the display message
"Recording".
• When an image data store operation is in progress, which is indicated by the
display message "Movie store" or “Snapshot store”.
• Note, however, that you can cancel an ongoing image data store operation
by tapping the Cancel button on the data save dialog box.
•
The number of seconds allowed for movie recording depends on the amount of
free memory space available. If you need to increase recording time, increase
the Program memory on the Memory dialog box ( - Settings - System tab -
Memory). If there is still not enough, you can delete applications you no longer
need or transfer data to a storage card to increase data storage memory and
then allocate more memory to program execution.