MA2202-EA © 2022 CASIO COMPUTER CO., LTD.
Watch Operation Guide 5686 Precautions ● ● Operating Precautions ● Water Resistance ● The information below applies to watches with WATER RESIST or WATER RESISTANT marked on the back cover.
Watch Operation Guide 5686 ● Temperature ● ● Never leave your watch on the dashboard of a car, near a heater, or in any other location that is subject to very high temperatures. Do not leave your watch where it will be exposed to very low temperatures. Temperature extremes can cause your watch to lose or gain time, to stop, or otherwise malfunction. Leaving your watch in an area hotter than +60 °C (140 °F) for long periods can lead to problems with its LCD.
Watch Operation Guide 5686 ● Bacteria and Odor Resistant Band ● The bacteria and odor resistant band protects against odor generated by the formation of bacteria from sweat, which ensures comfort and hygiene. In order to ensure maximum bacteria and odor resistance, keep the band clean. Use an absorbent soft cloth to thoroughly wipe the band clean of dirt, sweat, and moisture. A bacteria and odor resistant band suppresses the formation of organisms and bacteria.
Watch Operation Guide 5686 Battery Replacement ● ● ● ● Leave battery replacement up to your original retailer or authorized CASIO service center. Mobile Link Precautions ● Legal Precautions ● Have the battery replaced only with the type specified in the “Specifications”. Use of a different battery type can cause malfunction. When replacing the battery, also request a check for proper water resistance.
Watch Operation Guide 5686 Before Getting Started... General Guide ① ② Watch Face and Display Indicators ③ ①② ③ This section provides an overview of the watch and introduces convenient ways it can be used. ④ Watch Features ● ⑤ Phone Linking ⑥ The watch supports connection and communication with a Bluetooth capable phone. ● World Time Display the current time in any one of 38 time zones* around the globe.
Watch Operation Guide 5686 ● Battery Replacement When battery power goes low, will start to flash and some functions will become disabled. If continues to flash, replace the battery. Request battery replacement from a CASIO service center or your original retailer. Navigating Between Modes Each press of (C) cycles between watch modes. ● In any mode, hold down (C) for at least two seconds to return to the Timekeeping Mode.
Watch Operation Guide 5686 Viewing the Face in the Dark The watch has an LED light that you can turn on for reading in the dark. ● Configuring the Auto Light Setting ● Specifying the Illumination Duration 1. Enter the Timekeeping Mode. You can select either 1.5 seconds or three seconds as the illumination duration. l Navigating Between Modes 2. Hold down (B) for at least two seconds.
Watch Operation Guide 5686 Useful Features Linking with a Phone Pairing the watch with your phone makes a number of the watch’s features easier to use. Auto time adjustment l Auto Time Adjustment screen of the phone to be paired with. [OK] is shown on the display while there is a connection between the watch and phone. While there is a Bluetooth connection between the watch and phone (Mobile Link), the watch’s current time setting is adjusted automatically.
Watch Operation Guide 5686 Important! ● The watch may not be able to perform auto time adjustment under the conditions described below. ー While the watch is too far away from its paired phone ー While communication is not possible due to radio interference, etc. ー While the phone is updating its system ー While CASIO WATCHES is not running on the phone ● Triggering Immediate Time Adjustment The watch’s time setting is adjusted automatically whenever you pair it with a phone.
Watch Operation Guide 5686 ● Displaying an Scheduled Event 1. X Enter the Timekeeping Mode. l Navigating Between Modes 2. X Press (D). ● This causes the display to change from the current time to an event. Each press of (B) switches between the information as described below.
Watch Operation Guide 5686 Configuring World Time Settings Specifying a World Time City with CASIO WATCHES causes the watch’s World Time City to change accordingly. Settings can be configured to perform auto summer time switching for the World Time City. ● Configuring the Summer Time Setting 1. Y Tap the “CASIO WATCHES” icon. 2. Y Perform the operation shown on the phone screen to select a summer time setting.
Watch Operation Guide 5686 Connection ● Deleting Pairing Information from the Connecting with a Phone 1. X Hold down (C) for at least two seconds Note ● Connection with your phone is not possible while the watch’s Airplane Mode is enabled. To connect with your phone, disable the Airplane Mode. l Using the Watch in a Medical Facility or Aircraft Your watch can connect with a phone that is paired with it.
Watch Operation Guide 5686 ● iPhone Only Time Adjustment Using Watch Operations to Adjust the Time Setting Your watch can connect with a phone to obtain information that it uses to adjust its date and time setting. If your watch cannot connect with a phone for some reason, you can use watch operations to adjust date and time settings. Deleting the phone’s pairing information For details about setting procedures, see your phone documentation.
Watch Operation Guide 5686 4. Press (C). 3. Keep pressing (C) until the setting you 5. Use (D) to select a summer time setting. Each press of (D) cycles through available settings in the sequence shown below. ● ● ● [AUTO] The watch switches between standard time and summer time automatically. want to change is flashing. ● 4. Configure the date and time settings. ● Each press of (C) moves the flashing to the next setting in the sequence shown below.
Watch Operation Guide 5686 ● Switching between 12-hour and 24- hour Timekeeping You can specify either 12-hour format or 24hour format for the time display. 1. Enter the Timekeeping Mode. l Navigating Between Modes 2. Hold down (B) for at least two seconds. Release the button when the name of the currently selected Home City appears on the display. ● This is the setting mode. The hands automatically shift out of the way for easy viewing of the display and other indicators.
Watch Operation Guide 5686 World Time City Setting setting. Use the procedure in this section to select a World Time city. If you are in an area that observes summer time, you can also configure a summer time setting. Each press of (D) cycles through settings in the sequence shown below. ● Note ● ● Alarm 4. Use (D) to change the summer time The initial factory default summer time setting for all cities is [AUTO].
Watch Operation Guide 5686 Enabling the Hourly Time Signal 3. Hold down (B) for at least two seconds. Release the button when the hour setting starts to flash. ● ● This is the setting mode. The hands automatically shift out of the way for easy viewing of the display and other indicators. 1. Enter the Alarm Mode. 2. Use (D) to scroll through the alarm ([AL1] to [AL5]) and hourly time signal ([SIG]) screens until the one you want to turn off is displayed. 2.
Watch Operation Guide 5686 Moving to Another Time Zone When you enter another time zone, the watch will adjust its time setting to your current location in accordance with the time zone of your phone. When you reach your destination, disable the watch Airplane Mode. Stopwatch The stopwatch measures elapsed time in 1/1000-second units for the first hour, and in 1/10-second units after that for up to 24 hours. In addition to normal elapsed time measurements, the stopwatch also lets you measure lap times.
Watch Operation Guide 5686 Measuring Lap Times 1. Enter the Stopwatch Mode. l Navigating Between Modes ● If a stopwatch timing operation is in progress, press (D) to stop it and then press (B) to reset the stopwatch to all zeros before performing the operation in step 2. Example: Recording a Race Lap Time Timer This section explains how to record lap times while watching a race. It also shows how you can view lap times with CASIO WATCHES after the race is over.
Watch Operation Guide 5686 3. Use (A) and (D) to change the timer hours setting. ● Holding down (A) or (D) scrolls through settings at high speed. Using the Timer 1. Enter the Timer Mode. l Navigating Between Modes 4. Press (C). This causes the minutes digits to flash. Minutes Mode hand ● 5. Use (A) and (D) to change the timer minutes setting. 6. Press (C). The mode hand points the remaining timer time. The mode hand points to [OVER] when the remaining time exceeds 120 minutes. 2.
Watch Operation Guide 5686 Other Settings 4. Press (C). This enables adjustment of the hour and minute hands. Hour hand Minute hand This section explains other watch settings you can configure. Changing the Date Display Format Specifying the Day of the Week Language You can select any one of six languages for the day of the week display in the Timekeeping Mode. 1. Enter the Timekeeping Mode. l Navigating Between Modes 2. Hold down (B) for at least two seconds.
Watch Operation Guide 5686 Enabling or Disabling the Schedule Timer Notification Sound Use the procedure below to enable or disable the schedule timer notification sound. Enabling the Button Operation Tone Use the procedure below to enable or disable the tone that sounds when you press a button. 1. Enter the Timekeeping Mode. l Navigating Between Modes 1. Enter the Timekeeping Mode. l Navigating Between Modes 2. Hold down (B) for at least two seconds.
Watch Operation Guide 5686 Other Information ● ● This section provides non-operational information you also need to know. Refer to this information as required. The information in the above table is current as of July 2021. Time zones may change and UTC differentials may become different from those shown in the table above. If this happens, connect the watch with a phone to update the watch with the latest time zone information.
Watch Operation Guide 5686 Specifications Accuracy at normal temperature : ±15 seconds per month average when time adjustment by communication with a phone is not possible. Timekeeping : Analog Hour, minute (moves every 20 seconds) Digital Hour, minute, second, month, day, day of the week a.m./p.m.(P)/24-hour timekeeping Full Auto Calendar (2000 to 2099) Summer Time Stopwatch : Measurement unit: 1/1000 seconds (first hour) 1/10 seconds (after first hour) Measurement range: 23 hours 59 minutes 59.
Watch Operation Guide 5686 Troubleshooting I can’t reconnect the watch and phone. I can’t pair the watch with a phone. Q1 The watch will not re-connect with the Q1 I’ve never been able to establish a (pairing) connection between the watch and phone. Are you using a supported phone model? Check if the phone model and its operating system are supported by the watch. For information about supported phone models, visit the CASIO Website. phone after they are disconnected.
Watch Operation Guide 5686 Changing to a Different Phone Model Phone-Watch Connection Q1 I can’t establish a connection between the phone and watch. Have you tried turning your phone off and then back on again? Turn your phone off and back on, and then tap the “CASIO WATCHES” icon. Next, on the watch, hold down (D) for at least two seconds. Q1 Connecting the current watch to another phone. Delete the pairing information from your watch and then pair it with the phone you want to connect with.
Watch Operation Guide 5686 Schedule timer Q1 How do I disable the schedule timer notification sound? Use the procedure below to disable the schedule timer notification sound. l Enabling or Disabling the Schedule Timer Notification Sound Q2 The schedule timer notification sound does not sound. Is schedule timer notification sound turned on? If it isn’t, turn it on so it will sound. l Enabling or Disabling the Schedule Timer Notification Sound Q3 The schedule timer function does not work.
Watch Operation Guide 5686 Q5 The current time indicated by the watch is off by one hour or 30 minutes. The summer time setting is not correct. Select the correct setting. l Setting a Home City Q6 The time indicated by the hands is different from the digital time. Strong magnetism or impact can cause the hands to go out of alignment. Adjust hand alignment. l Adjusting Hand Alignment ● Check the information below to find out how to align the hands manually.
