MA2212-EA © 2022 CASIO COMPUTER CO., LTD.
Watch Operation Guide 5707 Precautions ● ● Operating Precautions ● Water Resistance ● The information below applies to watches with WATER RESIST or WATER RESISTANT marked on the back cover.
Watch Operation Guide 5707 ● Magnetism ● ● The hands of analog and combination (analog-digital) watches are moved by a motor that uses magnetic force. When such a watch is close to a device (audio speakers, magnetic necklace, cell phone, etc.) that emits strong magnetism, the magnetism can cause timekeeping to slow down, speed up, or stop, resulting in the incorrect time being displayed. Very strong magnetism (from medical equipment, etc.
Watch Operation Guide 5707 User Maintenance ● Caring for Your Watch Remember that you wear your watch next to your skin, just like a piece of clothing. To ensure your watch performs at the level for which it is designed, keep it clean by frequently wiping with a soft cloth to keep your watch and band free of dirt, sweat, water and other foreign matter. ● ● ● ● ● Whenever your watch is exposed to sea water or mud, rinse it off with clean fresh water.
Watch Operation Guide 5707 Mobile Link Precautions ● Legal Precautions ● ● This watch complies with or has received approval under the radio laws of various countries and geographical areas. Using this watch in an area where it does not comply with or has not received approval under applicable radio laws may be a criminal offense. For details, visit the CASIO Website. https://world.casio.com/ce/BLE/ Use of this watch inside of aircraft is restricted under the aviation laws of each country.
Watch Operation Guide 5707 Before Getting Started... General Guide Watch Face and Display Indicators ① ② ① ② ③ This section provides an overview of the watch and introduces convenient ways it can be used. Watch Features ● ⑩ ③ Phone Linking The watch supports connection and communication with a Bluetooth capable phone. ● World Time A LCD Display the current time in any one of 39 time zones* around the globe. B Minute hand * Subject to being updated when connected with a phone.
Watch Operation Guide 5707 Navigating Between Modes Cycling Between Timekeeping Mode Digital Display Contents Each press of (D) cycles between watch modes. ● In any mode, hold down (D) for at least two seconds to return to the Timekeeping Mode. Each press of (A) in the Timekeeping Mode toggles between the display information as shown below.
Watch Operation Guide 5707 ● Checking the Charge Level Low Battery Power ● Charging Time Guidelines In the Timekeeping Mode, the current charge level is indicated by the mode hand. The second hand jumps at two-second intervals. The table below shows guidelines for approximate charging times. Charging Times Required for 1 Day of Operation Light Level (Lux) Second hand ① ② ③ Dead Battery All hands are stopped.
Watch Operation Guide 5707 ● Power Saving Function Leaving the watch in a dark location for about one hour between the hours of 10 p.m. and 6 a.m. will cause the display to go blank, and the watch to enter Level 1 power saving. If the watch is left in this condition for six or seven days, the watch will enter Level 2 power saving. Viewing the Face in the Dark The watch has an LED light that you can turn on for reading in the dark.
Watch Operation Guide 5707 ● Specifying the Illumination Duration You can select either 1.5 seconds or three seconds as the illumination duration. 1. Enter the Timekeeping Mode. l Navigating Between Modes Useful Features Linking with a Phone Pairing the watch with your phone makes a number of the watch’s features easier to use.
Watch Operation Guide 5707 4. Y Perform the operation shown on the screen of the phone to be paired with. ● When pairing starts, the second hand will point to [R]. When pairing is complete, the second hand will move to e. Pairing started Pairing complete Auto Time Adjustment Your watch will connect with a phone at preset times each day and adjust its time settings automatically. ● Using This Function Your watch adjusts its time setting four times a day according to a preset schedule.
Watch Operation Guide 5707 Viewing Stopwatch Data This section explains how to send lap times (up to 200 records) that are stored in watch memory, as well as other data to your phone for viewing with CASIO WATCHES. ● Sending Stopwatch Data to a Phone Use the procedure below to send data from the watch to a phone. Configuring World Time Settings Specifying a World Time City with the CASIO WATCHES phone app causes the watch’s World Time City to change accordingly.
Watch Operation Guide 5707 ● Swapping Your World Time and Home Time 1. Y Tap the “CASIO WATCHES” icon. 2. X Hold down (C) for at least 1.5 seconds until [CNCT] starts to flash. When a connection is established between the watch and phone, [CNCT] will stop flashing and the second hand will Adjusting Hand Alignment If the hands are out of alignment even though auto time adjustment is being performed, use CASIO WATCHES to adjust them. 1. Y Tap the “CASIO WATCHES” icon. 2. X Hold down (C) for at least 1.
Watch Operation Guide 5707 Changing the Home City Summer Time Setting 1. Y Tap the “CASIO WATCHES” icon. 2. X Hold down (C) for at least 1.5 seconds until [CNCT] starts to flash. When a connection is established between the watch and phone, [CNCT] will stop flashing and the second hand will move from [R] to e. ● If connection fails for some reason, [ERR] will appear on the display momentarily and then the watch will return to the mode it was in before you started the connection procedure.
Watch Operation Guide 5707 Note ● The connection will be terminated if you do not perform any operation on the watch or phone for a fixed amount of time. To specify the connection limit time, perform the following operation with CASIO WATCHES: “Watch settings” n “Connection time with the app”. Next, select a setting of 3 minutes, 5 minutes, or 10 minutes. Disconnecting from Your Phone This causes the seconds to flash. Seconds ● 4. X Hold down (B) for at least two seconds.
Watch Operation Guide 5707 Using Watch Operations to Adjust the Time Setting If your watch cannot connect with a phone for some reason, you can use watch operations to adjust date and time settings. 5. Use (E) to change the summer time setting. Each press of (E) cycles through settings in the sequence shown below. ● ● Setting a Home City Use the procedure in this section to select a city to use as your Home City.
Watch Operation Guide 5707 4. Configure the date and time settings. ● ● ● Switching between 12-hour and 24- hour Timekeeping While the seconds are flashing, pressing (E) will reset them to 00. 1 is added to the minutes when the current seconds count is between 30 and 59 seconds. You can specify either 12-hour format or 24hour format for the time display. For all the other settings, use (B) and (E) to change the flashing setting. Holding down (B) or (E) scrolls through settings at high speed. 2.
Watch Operation Guide 5707 World Time World Time lets you look up the current time in any one of 39 cities around the globe, and UTC (Coordinated Universal Time). World Time City Setting Use the procedure in this section to select a World Time city. If you are in an area that observes summer time, you can also configure a summer time setting. Note ● The initial factory default summer time setting for all cities is [AUTO].
Watch Operation Guide 5707 Alarm The watch will beep when an alarm time is reached. You can set up to five different alarms. The hourly time signal causes the watch to beep every hour on the hour. ● The alarm sound is muted in the cases described below. ー When battery power is low ー When watch is at Level 2 power saving 3. Hold down (A) for at least two seconds. Release the button when the hours digits start to flash. ● ● l Power Saving Function This is the setting mode.
Watch Operation Guide 5707 Configuring Schedule Alarm Settings With the [SCH] (schedule) alarm type, you can specify the year, month, and day that you want an alarm to sound. Release the button when the hours digits start to flash. 1. Enter the Alarm Mode. Hours l Navigating Between Modes 2. Use (E) to display the hourly time signal ● Creating a Schedule Alarm There are various schedule alarm variations, and the variation that is set depends on the year, month, and day settings you configure.
Watch Operation Guide 5707 1. Enter the Alarm Mode. l Navigating Between Modes 2. Use (E) to scroll through the alarm ([AL1] to [AL5]) and hourly time signal ([SIG]) screens until the one you want to turn off is displayed. Alarm number or hourly time signal Moving to Another Time Zone Use the procedure below to easily change day and time settings of the watch to a destination location. ● After Arriving 1. Swap the origin time zone time with the destination time zone time.
Watch Operation Guide 5707 Stopwatch The stopwatch measures elapsed time in 1/1000-second units for the first hour, and in 1/10-second units after that for up to 24 hours. In addition to normal elapsed time measurements, the stopwatch also lets you measure lap times. Measuring Elapsed Time 1. Enter the Stopwatch Mode. l Navigating Between Modes 2. Use the operations below to measure Measuring Lap Times 1. Enter the Stopwatch Mode. l Navigating Between Modes ● elapsed time.
Watch Operation Guide 5707 Example: Recording a Race Lap Time 3. X Use the operations below to measure lap times. This section explains how to record lap times while watching a race. It also shows how you can view lap times with CASIO WATCHES after the race is over. l Lap Times E Start E Viewing Measured Data Records You can use the procedure below to view lap time records. 1. Enter the Recall Mode.
Watch Operation Guide 5707 Lap Times Timer A lap time is the time elapsed during a specific lap or segment. Lap times are recorded internally by the watch. The watch displays the elapsed time of the current lap. E Start The timer counts down from a start time specified by you. A beeper sounds when the end of the countdown is reached. ● The beeper is muted when battery power is low. 3. Use (B) and (E) to change the timer hours setting. ● Holding down (B) or (E) scrolls through settings at high speed.
Watch Operation Guide 5707 Using the Timer 1. Enter the Timer Mode. l Navigating Between Modes Hour, minute, second 2. Use the operations below to perform a timer operation. E Start (Countdown starts) Hand Alignment Adjustment Using CASIO WATCHES to Adjust Hand Alignment If the watch is paired with a phone, you can also use CASIO WATCHES to adjust hand alignment. l Adjusting Hand Alignment ● ● A beeper will sound for 10 seconds to let you know when the end of a countdown is reached.
Watch Operation Guide 5707 Other Settings This section explains other watch settings you can configure. Changing the Date Display Format Specifying the Day of the Week Language You can select any one of six languages for the day of the week display in the Timekeeping Mode. 1. Enter the Timekeeping Mode. l Navigating Between Modes 2. Hold down (A) for at least two seconds Use the procedure below to enable or disable the tone that sounds when you press a button. 1. Enter the Timekeeping Mode.
Watch Operation Guide 5707 Configuring Power Saving Function Settings 1. Enter the Timekeeping Mode. l Navigating Between Modes 2. Hold down (A) for at least two seconds until the name of the currently selected Home City is displayed. ● This is the setting mode. The hands automatically shift out of the way for easy viewing of the display and other indicators. Resetting Watch Settings This section explains how to return the watch settings below to their initial factory defaults.
Watch Operation Guide 5707 ● ● The information in the above table is current as of July 2022. Time zones may change and UTC differentials may become different from those shown in the table above. If this happens, connect the watch with a phone to update the watch with the latest time zone information. City Name Note ● Summer time start and end dates for your current location may be different from those shown below.
Watch Operation Guide 5707 Copyrights and Registered Copyrights Mobile Link : Auto Time Correction Time setting adjusted automatically at preset time One-touch Time Correction Manual connection and time adjustment Phone finder Watch operation sounds the alert sound of the mobile phone World Time Current time for approximately 300 cities selected for the watch Home Time/World Time swapping Auto Summer Time Switching Automatic switching between standard time and summer time Timer Settings Alarm Settings Stop
Watch Operation Guide 5707 I can’t reconnect the watch and phone. Q1 The watch will not re-connect with the phone after they are disconnected. Is the CASIO WATCHES phone app running? Q2 I can’t connect while my phone is in the Airplane Mode. Connection with the watch is not possible while the phone’s Airplane Mode is enabled. After disabling the phone’s Airplane Mode, go to the phone’s Home Screen and tap the “CASIO WATCHES” icon. Next, on the watch, hold down (C) for at least 1.5 seconds.
Watch Operation Guide 5707 Auto Time Adjustment by Bluetooth Connection (Time Adjustment) Q1 When does the watch adjust its time? The watch will connect with the phone and perform auto time adjustment at around 12:30 a.m., 6:30 a.m., 12:30 p.m. and 6:30 p.m. The connection is automatically terminated after auto time adjustment is complete. Q2 Auto time adjustment is not performed at a scheduled time.
Watch Operation Guide 5707 Q3 The hands suddenly start moving at high speed. This is due to the reason (or one of the reasons) below, and does not indicate malfunction. Simply wait until normal hand movement resumes. ● ● The watch is recovering from a power saving state. l Power Saving Function Watch is connected with a phone to adjust its time setting. l Auto Time Adjustment Q4 Hands are stopped and buttons do not work. The watch is in the charge recovery mode.
