MA2207-EA © 2022 CASIO COMPUTER CO., LTD. Watch Operation Guide 5697 Contents Time Adjustment Using Watch Operations to Adjust the Time Precautions Operating Precautions User Maintenance Battery Mobile Link Precautions and Day Settings Configuring Dual Time Settings Moving to Another Time Zone Alarm Using CASIO WATCHES to Configure Alarm Before Getting Started...
Watch Operation Guide 5697 Precautions ● ● Operating Precautions ● Water Resistance ● The information below applies to watches with WATER RESIST or WATER RESISTANT marked on the back cover.
Watch Operation Guide 5697 ● Temperature ● Never leave your watch on the dashboard of a car, near a heater, or in any other location that is subject to very high temperatures. Do not leave your watch where it will be exposed to very low temperatures. Temperature extremes can cause your watch to lose or gain time, to stop, or otherwise malfunction.
Watch Operation Guide 5697 User Maintenance ● Caring for Your Watch Remember that you wear your watch next to your skin, just like a piece of clothing. To ensure your watch performs at the level for which it is designed, keep it clean by frequently wiping with a soft cloth to keep your watch and band free of dirt, sweat, water and other foreign matter. ● ● ● ● ● Whenever your watch is exposed to sea water or mud, rinse it off with clean fresh water.
Watch Operation Guide 5697 Mobile Link Precautions ● Legal Precautions ● ● This watch complies with or has received approval under the radio laws of various countries and geographical areas. Using this watch in an area where it does not comply with or has not received approval under applicable radio laws may be a criminal offense. For details, visit the CASIO Website. https://world.casio.
Watch Operation Guide 5697 Before Getting Started... This section provides an overview of the watch and introduces convenient ways it can be used. General Guide The terms below are for the Calendar Mode. ③ ⑥ Stopwatch You can measure elapsed time up to 24 hours in one-second units. ● ● Dual Time ⑧ ⑨ ⑤ A 24-hour hand ④ B Hour hand ⑥ ⑦ C Dual Time hour hand D Dual Time minute hand Alarm F Function hand E Dual Time 24-hour hand An alarm sounds whenever a time specified by you is reached.
Watch Operation Guide 5697 Navigating Between Modes ● Stopwatch Mode Mode Overview Pressing (A) in the Calendar Mode enters the Stopwatch Mode and starts an elapsed time measurement operation. ● Calendar Mode Holding down (A) for at least two seconds in the Stopwatch Mode enters the Calendar Mode. The small hour and minute hands show another time (Dual Time). The main hour, minute, and second hands indicate the current time.
Watch Operation Guide 5697 Using the Crown Hand and Day Indicator Movement ● Fast Forward/Fast Reverse Crown Day indicator Charging This watch runs on power supplied from a rechargeable (secondary) battery that is charged by a solar panel. The solar panel is integrated into the face of the watch, and power is generated whenever the face is exposed to light.
Watch Operation Guide 5697 ● Remaining Charge and Dead Battery ● Charging Time Guidelines ● Power Saving You can determine if the charge level is low by checking the hand movement. Functions become disabled as battery power goes low. The table below shows guidelines for approximate charging times. Leaving the watch in a dark location for about one hour between the hours of 10 p.m. and 5:50 a.m. will cause the second hand to stop, and the watch to enter Level 1 power saving.
Watch Operation Guide 5697 Useful Features Linking with a Phone Pairing the watch with your phone makes a number of the watch’s features easier to use. Auto time adjustment l Auto Time Adjustment While there is a Bluetooth connection between the watch and phone (Mobile Link), the watch’s current time setting is adjusted automatically. You can also change the watch’s other settings. ● C Pair the watch with a phone. Before you can use the watch in combination with a phone, you first need to pair them.
Watch Operation Guide 5697 Auto Time Adjustment The watch will connect with a phone at preset times each day and adjust its time settings. ● Using This Function Your watch adjusts its time setting four times a day according to a preset schedule. If you leave the watch in the Calendar Mode, it will perform the adjustment operation automatically as you go about your daily life, without any operation required by you.
Watch Operation Guide 5697 Configuring World Time Settings Specifying a World Time City with CASIO WATCHES causes the watch’s World Time City to change accordingly. The standard time/summer time setting of the World Time will be adjusted automatically without any watch operation required by you. 30 ● Configuring the Summer Time Setting 1. Y Tap the “CASIO WATCHES” icon. 2. X Hold down (B) for at least two seconds until the second hand points to [R] twice. 3.
Watch Operation Guide 5697 Adjusting Hand and Day Indicator Alignment 2. X Hold down (B) for at least four seconds until the second hand points to e. If the hands and/or day indicator are out of alignment even though auto time adjustment is being performed, use CASIO WATCHES to adjust them. A connection will be established between the watch and phone, and then the phone’s ringtone will sound. ● 1. Y Tap the “CASIO WATCHES” icon. It will take a few seconds before the phone tone sounds. 2.
Watch Operation Guide 5697 Recording Your Current Location (TIME & PLACE) While traveling or otherwise on the go, you can use the procedure below to record your current location, along with the time and date, on your phone. Recorded location information can be viewed on a CASIO WATCHES map while the watch is connected with your phone. ● Recording Your Current Location 1. X Enter the Calendar Mode. l Navigating Between Modes 2.
Watch Operation Guide 5697 Time Adjustment Unpairing Unpairing the watch from a phone requires both CASIO WATCHES and watch operations. ● Deleting Pairing Information from CASIO WATCHES 1. X If the watch is connected with a phone, press any button to terminate the connection. Connected Important! ● Disconnected 30 Your watch can connect with a phone to obtain information that it uses to adjust its date and time setting. 30 2. Y Tap the “CASIO WATCHES” icon. 3.
Watch Operation Guide 5697 5. Press (A). This enables the year one’s digit setting operation. 6. Rotate the crown to move the second hand to the desired setting for the year one’s digit. Year (one’s digit) 0 1 2 9 Configuring Dual Time Settings Moving to Another Time Zone Dual Time lets you keep track of the current time in another time zone in addition your current location time. Use the procedure below to easily change day and time settings of the watch to a destination location.
Watch Operation Guide 5697 Configuring Alarm Settings Alarm The watch will beep when an alarm time is reached. ● 1. Pull out the crown to the first click. This causes the second hand to move to 12 o’clock, and the function hand to move to [DT]. The alarm sound is muted in the cases described below. ー When battery power is low ー When the watch is at Level 2 power saving Turning Off the Alarm If you leave the alarm turned on, it will sound every day at the preset alarm time.
Watch Operation Guide 5697 Flyback Timing (Lap Timing) Stopwatch Pressing (A) in the Calendar Mode enters the Stopwatch Mode and starts an elapsed time measurement operation (Direct Start). The stopwatch measures elapsed time in units of one second up to 23 hours, 59 minutes, 59 seconds (24 hours). ● Lap Times A lap time is the time elapsed during a specific lap or segment. Lap times are recorded internally by the watch. The watch displays the elapsed time of the current lap.
Watch Operation Guide 5697 Checking the Difference Between the Current and Previous Lap Times Example: Recording a Race Lap Time This section explains how to record lap times while watching a race. It also shows how you can view lap times with CASIO WATCHES after the race is over. l Lap Times You can check the difference between the previous and current lap times while a lap time measurement operation is in progress.
Watch Operation Guide 5697 4. Press (B). Other Settings 9. If the function hand and/or the day indicator is out of alignment, rotate the crown to adjust them. Move the function hand to 12 o’clock and/or the day to the center of the indicator window. This enables adjustment of hour hand, minute hand, and 24-hour hand alignment. ● 24-hour hand Minute hand Hour hand ● 30 5.
Watch Operation Guide 5697 Other Information Specifications Approximate Battery Life : Approximately 5 months Conditions Not exposed to light under the conditions below. Auto Time Adjustment: 4 times/day Alarm: Once (10 seconds)/day Power Saving: 6 hours/day Accuracy at normal temperature : This section provides non-operational information you also need to know. Refer to this information as required. ±15 seconds per month average when time adjustment by communication with a phone is not possible.
Watch Operation Guide 5697 Troubleshooting I can’t reconnect the watch and phone. I can’t pair the watch with a phone. Q1 The watch will not re-connect with the Q1 I’ve never been able to establish a (pairing) connection between the watch and phone. Are you using a supported phone model? Check if the phone model and its operating system are supported by the watch. For information about supported phone models, visit the CASIO Website. phone after they are disconnected.
Watch Operation Guide 5697 Phone-Watch Connection Q1 I can’t establish a connection between the phone and watch. Have you tried turning your phone off and then back on again? Turn the phone off and then back on, and then tap the “CASIO WATCHES” icon. Then on the watch, hold down (B) for at least two seconds until the second hand points to [R] twice. Auto Time Adjustment by Bluetooth Connection (Time Adjustment) Alarm Q1 The alarm does not sound.
Watch Operation Guide 5697 Q4 Hands are stopped and buttons do not work. The watch is in the charge recovery mode. Wait until the recovery process is complete (for about 15 minutes). The watch will recover more quickly if you place it in a brightly lit location. Q5 The hand and/or day indicator are not aligned correctly. Strong magnetism or impact can cause the hands and/or the indicator to go out of alignment. Adjust hand and/or day indicator alignment.
