User`s guide

104

OTHER RECORDING FUNCTIONS

• You can change the camera settings that are made

when you select a BESTSHOT scene. Note,

however, that the BESTSHOT settings revert to their

defaults when you select another BESTSHOT scene,

change the recording mode, or turn off the camera.

• Noise reduction processing is performed

automatically when you are recording a night scene,

fireworks, or other image that requires slow shutter

speeds. Because of this, it takes longer to record

images at lower shutter speeds. Make sure that you

do not perform any camera button operations until

the image recording operation is complete.

NOTE

• Operation guidance and

the currently selected

BESTSHOT scene

appear on the display for

about two seconds if the

camera is in the

BESTSHOT mode when

you turn it on.

Creating Your Own BESTSHOT Setup

You can use the procedure below to save the setup of an

image you recorded for later recall when you need it again.

Recalling a setup you save automatically sets up the

camera accordingly.

Align the mode dial with .

• This enters the BESTSHOT mode and displays a

sample scene.

Use [] and [] to

display “Register

User Scene”.

Press [SET].