User`s guide

OTHER SETTINGS
167
Select this setting:
Power On
Power On/Off
Disable
To configure this operation:
Power turns on when [
] (REC) or
[
] (PLAY) is pressed (but does not
turn off)
Power turns on or off when [
]
(REC) or [ ] (PLAY) is pressed
Power does not turn on or off when
[
] (REC) or [ ] (PLAY) is
pressed
IMPORTANT!
• When “Power On/Off” is selected, pressing [ ]
(REC) in the REC mode or [ ] (PLAY) in the PLAY
mode turns off the camera.
• Pressing [ ] (REC) in the PLAY mode switches to
the currently selected recording mode, and pressing
[ ] (PLAY) in the REC mode switches to the PLAY
mode.
• When connecting the camera to a TV for viewing
camera images, “Power On” or “Power On/Off” must
be selected for the power on/off function.
NOTE
• The initial default setting is “Power On”.
Formatting Built-in Memory
Formatting built-in memory deletes any data stored in it.
IMPORTANT!
• Note that data deleted by a format operation cannot
be recovered. Check to make sure you do not need
any of the data in memory before you format it.
• Formatting built-in memory deletes the following.
— Protected images
— FAVORITE folder images
— BEST SHOT mode user setups
— Startup screen image
• Before starting the format operation, check to make
sure that the camera’s battery is not low. Battery
power going low during formatting can cause
improper formatting and creates the risk of camera
malfunction.
• Never open the battery cover while the format
operation is being performed. Doing so creates the
risk of camera malfunction.