User`s guide

VIEWING IMAGES ON A COMPUTER
191
12. Place the camera onto the USB cradle.
• Do not place the camera onto the USB cradle while it
is turned on.
• Pressing the [USB] button enters the USB mode,
which causes the USB cradle’s [USB] lamp to light
green (page 230).
• At this point, some operating systems will display a
“Removable Disk” dialog box. If your operating
system does, close the dialog box.
13. Press the USB cradle’s [USB] button.
• This will cause your computer to create a hardware
profile for camera’s built-in memory or the memory
card loaded in the camera. You do not need to install
the USB driver every time. After you install it once,
your computer will recognize the camera’s built-in
memory or its memory card when you establish a
USB connection between the camera and your
computer.
[USB] button
[USB] lamp