User manual - EXFC100_MF_FB_na

Snapshot Tutorial

Pressing Ç (Continuous Shutter) toggles between

the Continuous Shutter mode and the Single Shot

mode (page 26).

With normal-speed continuous shutter (Normal Speed CS) you can shoot a series of

images at a speed of approximately one image per second as long as there is

memory available for image storage.

1. In the REC mode, press [MENU].

2. Use [4] and [6] to select the “REC” tab.

3. Use [8] and [2] to select “CS” and then press [6].

4. Use [8] and [2] to select “Normal Speed CS”, and then press [SET].

5. Press Ç (Continuous Shutter).

• This will display Z (Normal Speed CS) and

surround the monitor screen with a yellow frame.

If this does not happen, press

Ç again.

6. Hold down the shutter button to shoot.

Images continue to be shot as long as you keep the

shutter button depressed and there is memory

available to store them. Releasing the shutter button

stops shooting.

IMPORTANT!

• Combining Normal Speed CS images into a CS group (page 100) manually on the

playback screen is not supported.

• You cannot specify the number of images shot per second (fps) with Normal Speed

CS.

• The number of images per second (fps) of Normal Speed CS varies slightly

depending on the type of memory card you are using and its current condition

(remaining capacity, fragmentation state, etc.)

• You cannot use Normal Speed CS in combination with Prerecord CS.

Using Continuous Shutter

Using Normal-speed Continuous Shutter

Ç (Continuous Shutter)

Normal Speed CS icon

Yellow frame