Owner's Manual

Snapshot Tutorial

3. Use [4] and [6] to select the shooting condition you want and then

press [SET].

• When “‡ Auto WB” is selected for the white balance setting, the camera

automatically determines the white point of the subject. Certain subject colors

and light source conditions can cause problems when the camera tries to

determine the white point, which makes proper white balance adjustment

impossible. If this happens, select the white balance setting that matches your

shooting conditions (Daylight, Overcast, etc.)

Auto WB Configures the camera to adjust white balance automatically

Daylight For shooting outdoors on a clear day

Overcast

For shooting outdoors on an overcast rainy day, in the

shade, etc.

Shade For shooting on a clear day in the shade of trees or buildings

Day White

Fluorescent

For shooting under white or day white fluorescent lighting

Daylight

Fluorescent

For shooting under daylight fluorescent lighting

Tungsten For shooting under light bulb lighting

Manual WB

For configuring the camera manually to suit a particular light

source.

Select “· Manual WB”.

Under the lighting conditions you plan to

use when shooting, point the camera at

a blank white piece of paper so it fills the

entire monitor screen and then press the

shutter button.

Press [SET].

The white balance setting is retained even if

you turn off the camera.

‡

“

†

–

Blank white

paper