Owner's Manual

Snapshot Tutorial

The Lag Correction function lets you correct for the lag time from the point you decide

to shoot until the point it takes for the shutter to actually release. This feature actually

does not speed up shutter release, but instead it pre-records images when you half-

press the shutter button and saves what occurred slightly before you press the

shutter button.

1. In the REC mode, press [SET].

2. Use [8] and [2] to select the third control panel

option from the bottom (Lag Correction).

3. Use [4] and [6] to select the lag correction time you want and then

press [SET].

You can select a correction time of “–0.1”, “–0.2”, or “–0.3” seconds. Select

“Ó Off” to disable lag correction.

4. Half-press the shutter button.

This starts pre-recording in accordance with the correction time you selected in

step 3.

5. When you want to record, press the shutter button the rest of the way

down.

This records the image currently in the buffer.

Using Lag Correction (Lag Correction)