User manual - EXFC400S_MF_FC

204
Other Settings (SETTING)
Procedure
[MENU] * “¥ SETTING” Tab * Video Output
You can use the procedure in this section to select either NTSC or PAL as the video
output system. You can also specify an aspect ratio of 4:3 or 16:9.
• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use.
Images will not display correctly if you select the wrong aspect ratio.
• Images will not display correctly unless the camera’s video signal output setting
matches the video signal system of the TV or other video equipment.
• Images cannot be displayed correctly on a TV or video equipment that is not NTSC
or PAL.
Procedure
[MENU] * “¥ SETTING” Tab * HDMI Output
• See page 136 for details.
Procedure
[MENU] * “¥ SETTING” Tab * Startup
Selecting “On” for Startup causes a built-in startup screen to appear on the monitor
screen whenever the camera is turned on.
Selecting the Screen Aspect Ratio and Video Output System
(Video Output)
NTSC Video system used in Japan, the U.S., and other countries
PAL Video system used in Europe and other areas
4:3 4:3 aspect ratio
16:9 Wide screen aspect ratio
Selecting the HDMI Terminal Output Method (HDMI Output)
Displaying a Startup Screen at Power On (Startup)