User manual - EXFC500S_MF_FA

Quick Start Basics

1. Press [ON/OFF] (Power) to turn on the

camera.

2. Use [8] and [2] to select the language

you want and then press [SET].

3. Use [8] and [2] to select a date style and then press [SET].

Example: July 10, 2015

YY/MM/DD

* 15/7/10

DD/MM/YY

* 10/7/15

MM/DD/YY

* 7/10/15

4. Set the date and the time.

Use [4] and [6] to select the setting you want to

change and then use [8] and [2] to change it.

To switch between 12-hour and 24-hour format, select

“24h” and then use [8] and [2] to change the setting.

5. After setting the date and time, use [4] and [6]

to select “Apply” and then press [SET].

NOTE

• Each country controls its local time offset and the use of summer time, and so they

are subject to change.

• Removing the battery from the camera too soon after configuring time and date

settings for the first time can cause the settings to be reset to their factory defaults.

Do not remove the battery for at least 24 hours after configuring settings.

If you make a mistake configuring display language, date, or time settings with the

above procedure, refer to the following pages for information about how to correct

the settings.

– Display language: page 210

– Date and time: page 209

[ON/OFF] (Power)