User Manual

38
Recording Images
. To stop an Interval Snapshot operation
1. On the controller, press any button to recover from the sleep state.
2. Touch “ ” icon.
3. Touch “Exit”.
This stops the Interval Snapshot operation.
. To shoot images manually during an Interval Snapshot operation
You can shoot snapshots and movies manually even while an Interval Snapshot
operation is in progress.
1. On the controller, press any button to recover from the sleep state.
2. Perform the required controller or camera operation to shoot the image
you want.
Shutter button:
The camera automatically determines whether you are shooting a subject or
scenery, and other conditions, and then shoots a snapshot.
[0] (Movie):
Records a movie in accordance with the “Max Recording Time” setting on the
menu screen (page 42). If “OFF” is selected for “Max Recording Time”, you need
to press [0] (Movie) again to stop movie recording.
NOTE
• You can also press the camera’s shutter button or [0] (Movie) button to shoot while
the camera is in the sleep state. In this case, shooting is performed as described
below.
Shutter button:
Records a snapshot in accordance with Interval Snapshot settings.
[0] (Movie) button:
Records a five-second movie. When “5 sec” is selected for the “Interval” setting,
the movie recording time is two seconds (page 36).