Operation Manual

69
Other Settings (Set Up)
Procedure
* MENU * Setup * Vibration
While “ON” is selected for this function, the controller will vibrate whenever any one of
the events described below occurs.
• When a preview of an image that what just shot appears on the controller screen
• When communication between the camera and controller is lost
• When an error occurs
Procedure
* MENU * Setup * Flick Start
While “ON” is selected for this function, flicking the screen of the controller while it is
in the sleep mode (page 26) will exit the sleep mode and restore the controller
display.
Procedure
* MENU * Setup * Adjust
1. Touch the value you want to change (year,
month, day, hour, minute).
2. Touch “ ” or “ ” to change the currently
selected value.
• You can specify a date from 2001 to 2049.
• To switch between 12-hour and 24-hour format,
touch “am (pm)”/“24h”, and then touch “ ” or
“”.
• Touching and holding “ ” or “ ” scrolls at high
speed.
3. Touch “Apply”.
Using the Vibration Function (Vibration)
Controller Display Recover Using a Flick Operation
(Flick Start)
Setting the Camera’s Clock (Adjust)
12/24 hour switch icon