User Manual

147
Appendix
There are various
indicators and
values on the
monitor screen.
The monitor screen shows indicators and other information
about shooting conditions and the image you are recording.
You can disable display of indicators and values by selecting
“Off” for “Info” on the Setup menu (page 105).
Buttons are not
responsive right
after the power has
been turned on.
With large capacity memory cards there is a delay after the
power has been turned on before the buttons become
responsive.
Images are not
displayed.
1)The camera is turned off.
2)There is no Bluetooth connection between the camera and
controller (page 28).
Problem Possible Cause and Recommended Action