User Manual

85
Connecting the Camera with a Smartphone
(Wireless Connection)
This function lets you remotely shoot a snapshot or movie with the camera using a
smartphone. You also can perform remote zoom and other operations as well.
NOTE
• When using a smartphone to shoot with the camera, you can add location
information obtained by the smartphone to the image data. For information about
how to do this, refer to the EXILIM Connect User’s Guide (page 78).
. Bluetooth Wireless Technology Connection
1. Perform one of the operations below.
– Enter the sleep mode.

Turn on the camera and controller.

On the controller, press [p] (Power).
This will enter the sleep mode, which is indicated by the camera’s operation
lamp slowly flashing green.
– Display the wireless mode screen.

Touch “ ” (Show Icons).

Touch the “ ” (Wireless) icon.
2. On the smartphone, start up the “EXILIM Connect” app.
3. On the smartphone, tap “Remote Capture”.
4. Compose the image on the smartphone’s screen as you shoot.
For information about how to use “Shoot with phone”, refer to the EXILIM Connect
manual (page 78).
. Cannot Connect with Bluetooth Wireless Technology
1. Touch the “ ” (Wireless) icon.
2. Touch “Shoot with phone”.
3. Touch “Start”.
• If there is a wireless LAN connection between the smartphone and camera,
advance to step 5 of this procedure.
4. For the smartphone’s Wi-Fi settings, select the SSID displayed on the
camera and establish a wireless LAN connection between the camera
and smartphone.
5. On the smartphone, start up the “EXILIM Connect” app.
Using a Smartphone as a Camera Remote Controller
(Shoot with phone)