Operation Manual

81
Connecting the Camera with a Smartphone
(Wireless Connection)
NOTE
• Auto Send can be used only with a smartphone that supports Bluetooth Smart.
Both a Bluetooth and wireless LAN connection are required between the camera
and smartphone to auto send camera images.
• You can specify the size of the image sent to the smartphone using “Resize When
Sending” (page 82).
• You can use the smartphone apps below to view snapshots after sending them.
– iPhone: Camera Roll
– Android terminal: Gallery, Photo, or another photo browser app
• Images shot while the Auto Send setting is “On” will be sent to the smartphone,
even if the Auto Send setting is changed to “Off” before they are sent.
• If the connection between the camera and smartphone is terminated while there
are still unsent images, Auto Send will be cancelled. The next time the camera and
smartphone are turned on and the camera enters the Sleep Mode, the Auto Send
operation will restart.
• If you delete an image that has not yet been sent to the smartphone, it will not be
included in the next Auto Send.
Procedure
“ ” (Wireless) * Wireless settings * Auto Send File Settings
Specifies the files to be sent to a smartphone by Auto Send.
IMPORTANT!
• The maximum size movie file that can be sent by Auto Send is 100 MB.
• Auto Send File Settings cannot be configured unless the camera is paired with a
smartphone (page 75).
Specifying Images to be Sent by Auto Send
(Auto Send File Settings)
T » Snapshots and movies are sent.
T Only Only snapshots are sent.