Operation Manual

Connecting the Camera with a Smartphone

(Wireless Connection)

Procedure

“ ” (Wireless) * Wireless settings * Resize When Sending

This feature can be use to resize snapshots before they are sent to a smartphone

using “Shoot with phone” or “Send to phone”.

Procedure

“ ” (Wireless) * Wireless settings * WLAN password

Use procedure to change the password you used when establishing a wireless LAN

connection between the camera and a smartphone.

IMPORTANT!

• Before changing the wireless LAN password, unpair the camera from its paired

smartphone (page 83).

1. Touch the password digit you want to change.

2. Touch “ ” or “ ” to change the currently selected digit.

3. When the password is the way you want, touch “OK”.

NOTE

• Changing the wireless LAN password will terminate the connection with the

smartphone. To reconnect with the smartphone, configure wireless connection

settings (page 75). If your smartphone does not support Bluetooth Smart, perform

the operations below to change your smartphone’s Wi-Fi settings.

– iPhone:

Tap the right arrow of the field where the SSID of the camera is displayed in the

Wi-Fi settings to delete network settings. After deleting, select the camera SSID

again and input the new password.

– Android terminal:

Tap the field where the SSID of the camera is displayed in the Wi-Fi settings and

select Forget. Select the camera SSID again and input the new password.

Resizing Snapshots before Sending Them to a Smartphone

(Resize When Sending)

Images are converted to 3M size before being sent.

• If an original image is 3M size or smaller, it is sent without

resizing.

Off Images are sent in the size they were originally recorded.

Changing the Camera Password for Wireless LAN Connection

(WLAN password)