User Manual
Table Of Contents
- Accessories
- Read this first!
- Using This Camera for the First Time
- Using This Camera with Another (Separately Available) Camera
- Contents
- General Guide
- Quick Start Basics
- Shooting with the Camera
- Controlling the Camera with a Smartphone
- Controlling Your Camera with a Smartphone
- Getting Ready to Establish a Connection between a Smartphone and Your Camera
- Using a Smartphone as a Camera Remote Controller (Shoot with phone)
- Viewing Snapshots and Movies in Camera Memory on a Smartphone (View on phone)
- Having Images Shot with the Camera Sent to a Smartphone Automatically (Auto Send)
- Unpairing the Camera from a Smartphone (Unpair)
- Operating the Camera with the Controller of Another (Separately Available) CASIO Camera
- Printing
- Using the Camera with a Computer
- Appendix
17
Quick Start Basics
. To turn on power
Press [p] (Power).
• Turning on the camera causes the operation
lamp to light green. This indicates that image
recording is enabled.
Sleep Mode
If you do not perform any operation for more than 30 seconds after turning on power,
it will enter a Sleep Mode.
The operation lamp slowly flashes green while the camera is in the sleep mode.
You can exit the sleep mode by pressing the shutter button or [0] (Movie) button.
NOTE
• If you have a controller from another (separately available) CASIO camera that is
connected with this camera, you can put this camera into the sleep mode by
pressing the controller’s [p] (Power) button.
. To turn off power
On the camera, hold down [p] (Power) for about two seconds.
• The camera will emit a sound when the camera is turned off. The camera turns off
when the power down process is complete.
Turning Power On and Off
[p] (Power)
Operation lamp