User Manual
Table Of Contents
- Accessories
- Read this first!
- Using This Camera for the First Time
- Using This Camera with Another (Separately Available) Camera
- Contents
- General Guide
- Quick Start Basics
- Shooting with the Camera
- Controlling the Camera with a Smartphone
- Controlling Your Camera with a Smartphone
- Getting Ready to Establish a Connection between a Smartphone and Your Camera
- Using a Smartphone as a Camera Remote Controller (Shoot with phone)
- Viewing Snapshots and Movies in Camera Memory on a Smartphone (View on phone)
- Having Images Shot with the Camera Sent to a Smartphone Automatically (Auto Send)
- Unpairing the Camera from a Smartphone (Unpair)
- Operating the Camera with the Controller of Another (Separately Available) CASIO Camera
- Printing
- Using the Camera with a Computer
- Appendix
33
Controlling the Camera with a Smartphone
To use the camera with a different smartphone, first unpair it from the current
smartphone and delete the pairing information from the camera.
To unpair, hold down the camera’s [0] (Movie) button and shutter button, as you hold
down the [p] (Power) button for six seconds. Unpairing is complete when the
camera’s operation lamp goes out.
NOTE
• Performing the above operation returns the wireless LAN password to its initial
default setting. For information about the initial default password, see page 30.
• When performing the unpairing operation, you will also need to perform the
required unpairing steps on the smartphone. For details, refer to the EXILIM
Connect user documentation (page 26).
Unpairing the Camera from a Smartphone (Unpair)