User Manual
Table Of Contents
- Accessories
- Read this first!
- Using This Camera for the First Time
- Using This Camera with Another (Separately Available) Camera
- Contents
- General Guide
- Quick Start Basics
- Shooting with the Camera
- Controlling the Camera with a Smartphone
- Controlling Your Camera with a Smartphone
- Getting Ready to Establish a Connection between a Smartphone and Your Camera
- Using a Smartphone as a Camera Remote Controller (Shoot with phone)
- Viewing Snapshots and Movies in Camera Memory on a Smartphone (View on phone)
- Having Images Shot with the Camera Sent to a Smartphone Automatically (Auto Send)
- Unpairing the Camera from a Smartphone (Unpair)
- Operating the Camera with the Controller of Another (Separately Available) CASIO Camera
- Printing
- Using the Camera with a Computer
- Appendix
34
Operating the Camera with the Controller of Another
(Separately Available) CASIO Camera
Operating the Camera with the Controller of
Another (Separately Available) CASIO Camera
Establishing a connection between this camera and the controller that comes with
another (separately available) CASIO camera makes it possible to operate the
camera and to configure camera settings from the controller. This section explains
how to establish a connection with a controller. For details about operations and
settings, refer to the user documentation that comes with the other camera.
. Wireless Connection with the Controller that Comes with a
Separately Available CASIO Camera
This camera connects with the controller of
another (separately available) CASIO camera
using Bluetooth wireless technology.
IMPORTANT!
• Your camera has Bluetooth wireless technology communication functionality built
in. Avoid operating the camera (including camera standalone operations) inside of
aircraft or anywhere else where wireless data communication is restricted.
This camera needs to be registered on a controller in order to establish a connection
between them.
1. If there is a memory card loaded in the camera, remove it (page 20).
2. While holding down the shutter button, hold down [p] (Power) for at
least one second.
This will cause the camera’s operation lamp to flash amber.
3. While holding down the controller shutter button, hold down [p]
(Power) for at least six seconds.
This will cause the controller’s operation lamp to flash amber to indicate that
camera registration has started.
Registering This Camera on a Controller