User manual
Table Of Contents
- Accessories
- Read this first!
- Contents
- General Guide
- Monitor Screen Contents and How to Change Them
- Quick Start Basics
- What you can do with your CASIO camera
- Using the Attachment
- Using the Touch Panel
- First, charge the battery prior to use.
- Turning Power On and Off
- Configuring Basic Settings the First Time You Turn On the Camera
- Preparing a Memory Card
- Shooting a Snapshot
- Viewing Snapshots
- Deleting Snapshots and Movies
- Snapshot Shooting Precautions
- Recording Images
- Advanced Recording Settings
- Using the REC Menu
- Shooting by Touching the Monitor Screen (Touch Shooting)
- Movie Image Quality Settings (Movie Quality)
- Reducing Blur Due to Camera Movement During Movie Recording (Movie Anti Shake)
- Shooting a Burst of Images (High Speed CS)
- Correcting Image Brightness (Brightness)
- Adjusting White Balance (White Balance)
- Specifying ISO Sensitivity (ISO)
- Self-shooting (Mirror Image)
- Reducing Wind Noise during Movie Recording (Wind Noise Cut)
- Turning on Image Review (Review)
- Saving an Additional Dome View Version of an Image (Double Save (Dome View))
- Using the REC Menu
- Viewing Snapshots and Movies
- Other Playback Functions (PLAY)
- Connecting the Camera with a Smartphone (Wireless Connection)
- Controlling Your Camera with a Smartphone
- Using a Wireless Mode
- Getting Ready to Establish a Connection between a Smartphone and Your Camera
- Using a Smartphone as a Camera Remote Controller (Shoot with phone)
- Sending a Snapshot or Movie File from Camera Memory to a Smartphone (Send Selected Image)
- Viewing Snapshots and Movies in Camera Memory on a Smartphone (View on phone)
- Configuring Wireless Connection Settings
- Having Images Shot with the Camera Sent to a Smartphone Automatically (Auto Send)
- Specifying Images to be Sent by Auto Send (Auto Send File Settings)
- Resizing Snapshots before Sending Them to a Smartphone (Resize When Sending)
- Changing the Camera Password for Wireless LAN Connection (WLAN password)
- Unpairing the Camera from a Smartphone (Unpairing)
- Using Two Cameras at the Same Time (Multi Camera Mode)
- Printing
- Using the Camera with a Computer
- Other Settings (Set Up)
- Adjusting Monitor Screen Brightness (Screen)
- Selecting Display Information (Info)
- Locking the Camera or Controller Screen Orientation (Rotation Lock)
- Configuring Camera Sound Settings (Camera Sound)
- Using the Vibration Function (Vibration)
- Setting the Camera’s Clock (Adjust)
- Specifying the Date Style (Date Style)
- Specifying the Display Language (Language)
- Specifying the Controller Sleep State Trigger Time (Sleep)
- Formatting Built-in Memory or a Memory Card (Format)
- Resetting the Camera to Factory Defaults (Reset)
- Checking the Current Camera Firmware Version (Version)
- Registering a Second Camera (Multi Camera Mode)
- Appendix
72
Connecting the Camera with a Smartphone
(Wireless Connection)
6. On the smartphone, tap the camera’s name you want to pair with.
This completes pairing of the camera and smartphone, and establishes a
Bluetooth wireless technology connection.
• In the case of an Android terminal, wireless LAN connection settings are also
configured automatically. In this case, advance to step 10 of this procedure. If
the screen shown in step 10 is not displayed, use the smartphone’s Wi-Fi
settings to select the SSID displayed on the camera and establish a wireless
LAN connection between the camera and smartphone.
• In the case of an iPhone (iOS), you need to configure wireless LAN settings
(install a profile) next. Advance to step 7 of this procedure.
7. On the smartphone, tap “Install”.
Follow the instructions that appear on the smartphone to install the profile
required for wireless LAN setup.
• On some smartphone models, the passcode input screen may appear. If this
happens, input your smartphone’s passcode.
8. After installation of the profile is complete, tap “Done” on the
smartphone.
9. On the smartphone screen, tap the “EXILIM Connect” icon.
This establishes a wireless LAN connection between the camera and
smartphone.
• If you are using an iPhone (iOS) and there is no wireless LAN connection
between the camera and smartphone, use the smartphone’s Wi-Fi settings to
select the camera’s SSID to establish a wireless LAN connection between the
camera and smartphone.
10.
On the smartphone, tap “OK”.
11.
Follow the instructions that appear on the smartphone to complete the
pairing operation.
NOTE
• “Auto Send” (page 77) will be turned on after you configure wireless connection
settings on the camera and smartphone.
• Turning off the camera also terminate the Bluetooth wireless technology
connection.