User Manual

71
Connecting the Camera with a Smartphone
(Wireless Connection)
The first time you establish a wireless connection between the camera and a
smartphone, you need to use the procedure below to configure wireless connection
settings. This operation is required for the first connection only.
. Smartphone that supports Bluetooth Smart
Connecting the camera to a smartphone using Bluetooth wireless technology
(pairing) makes it simple to configure wireless connection settings.
IMPORTANT!
• Performing this operation automatically configures your smartphone’s wireless
LAN connection settings (page 73).
• Your camera can be paired with a single smartphone at one time.
• Some smartphone models may not be compatible with this camera.
• If you want to re-pair the camera with the smartphone it is already paired with, first
unpair them and then pair again. Re-pairing the camera and smartphone will result
in all pending unsent images to remain unsent.
Camera (Controller) Operation
1. Touch the “ ” (Wireless) icon.
This will display the wireless mode screen.
2. Touch “Pairing”.
3. Touch “Start”.
• You can start pairing by performing an operation on the camera, without using
the controller.

On the camera, hold down [p] (Power) for about two seconds to turn off
power.

On the camera, hold down [p] (Power) for about six seconds.
The camera’s operation lamp will flash amber.
Smartphone Operation
4. Start up the “EXILIM Connect” app.
5. Tap “Pairing”.
Establishing a Wireless Connection for the First Time