User Manual

72
Connecting the Camera with a Smartphone
(Wireless Connection)
6. On the smartphone, tap the camera’s name you want to pair with.
This completes pairing of the camera and smartphone, and establishes a
Bluetooth wireless technology connection.
• In the case of an Android terminal, wireless LAN connection settings are also
configured automatically. In this case, advance to step 10 of this procedure. If
the screen shown in step 10 is not displayed, use the smartphone’s Wi-Fi
settings to select the SSID displayed on the camera and establish a wireless
LAN connection between the camera and smartphone.
• In the case of an iPhone (iOS), you need to configure wireless LAN settings
(install a profile) next. Advance to step 7 of this procedure.
7. On the smartphone, tap “Install”.
Follow the instructions that appear on the smartphone to install the profile
required for wireless LAN setup.
• On some smartphone models, the passcode input screen may appear. If this
happens, input your smartphone’s passcode.
8. After installation of the profile is complete, tap “Done” on the
smartphone.
9. On the smartphone screen, tap the “EXILIM Connect” icon.
This establishes a wireless LAN connection between the camera and
smartphone.
• If you are using an iPhone (iOS) and there is no wireless LAN connection
between the camera and smartphone, use the smartphone’s Wi-Fi settings to
select the camera’s SSID to establish a wireless LAN connection between the
camera and smartphone.
10. On the smartphone, tap “OK”.
11. Follow the instructions that appear on the smartphone to complete the
pairing operation.
NOTE
• “Auto Send” (page 77) will be turned on after you configure wireless connection
settings on the camera and smartphone.
• Turning off the camera also terminate the Bluetooth wireless technology
connection.