User manual - EXMR1_M29_FA

Quick Start Basics

To replace the battery

1. Open the battery cover and

remove the current battery.

2. Load a new battery.

You can use either of the two following methods to charge the camera’s battery.

• USB-AC adaptor

• USB connection to a computer

. To charge with the USB-AC adaptor

The adaptor lets you charge the battery while it is loaded in the camera.

While the camera is turned off, connect in the sequence shown below.

Charging time: Approximately 150 minutes

• When disconnecting the USB-AC adaptor from the camera, be sure to disconnect

from the camera first.

Charge the Battery

Stopper

Micro USB cable

(included with camera)

u mark of the small (micro USB)

connector facing the mirror side.

[USB] port

USB-AC adaptor

(AD-C53U)

Power cord