010101101011011S BU 111000 RM AN ITDO MEOX R 1 00 01 01 00 www.networkscentre.
Welcome to the Networks Centre catalogue… Your complete guide to our extensive product range Established in 2005, Networks Centre has fast become one of the UK’s leading Network Cabling and Security product distributors; offering an extensive range of premier cabling systems and quality networking products. Manufacturing Partners Exceeding your expectations is our number one objective Training Programmes We want you to understand how committed we are to supporting your business...
Fibre Optic Cabling 43 Tools 51 Copper Cabling 57 Networking We make ordering easy Sales Office opening hours (8am-6pm) +44 (0)1403 754233 65 Brand Rex 95 Panduit +44 (0)1403 750663 enquiries@networkscentre.com www.networkscentre.
& r e c i s l l p a S t n n e o i R s t u F n e m p i u q E Test plicers S n o i s r Fu oducts r o f p f e o c i v n tal ser electio n s e r a s a i r we offe ipment. Below e r t n e orks C nt Equ w e t e m N e r t u A NTAL E eas R M X T D & t s and Te ntal.
At Networks Centre we pride ourselves on being able to offer our customers one of the most extensive ranges of fibre optic cabling products in Europe. We stock loose tube, tight buffered, steel-tapearmoured and steel-wire-armoured cables; as well as 2.8mm and flat twin zip-cord. Cables are available in: OS1, OS2, OM1, OM2, OM3 and OM4. In total, we have over ninety six cable variants, all available from stock. To compliment our optical cable stock range, we also offer a bespoke cable manufacturing service.
F I BRE OP TI C C A B LI NG ➤ Standard Cables standard cables Up to 48 Core Cables available on a next day delivery We hold stock of Loose Tube, Tight Buffered, Steel Tape Armoured, Steel Wire Armoured and Zipcord cables. Our selection of chosen brands ensures we are always able to offer market leading prices on quality industry recognised cables.
➤ The ER O CuT T LE VICE FREE N GTh S cables can be ordered with a central strength member, either made of dielectric FRP, or made of solid or stranded steel coated with polyethylene. ➤ 2 – 12 colour coded fibres are loosely laid in each tube that is filled with a water blocking gel. ➤ Standard Technical Specification Max. pulling load 1500-2700N or the equivalent of the cable weight per km, whichever is higher tube diameters are 2.1mm for up to 6 fibres per tube and 2.
LE VICE ER F I BRE OP TI C C A B LI NG ➤ Standard Cables ➤ 4 FREE O CuT T 6 ➤ Tight Buffered N GTh S - 72 fibres individually buffered to 0.9mm in a tight or semi tight construction and coded. - 24 fibre cables contain individual fibres without sub-units. ➤4 ➤ 24 - 72 fibre cables the fibres are grouped in sub-units. ➤ 4 4 – 12 core 16 – 24 core Outer Diameter 7.2mm 8.
-DX-D28-IN-YW-NC 3-DX-D28-IN-AA-NC om3 2.8mm zipcord suitable for internal use, lszh, aqua singlemode 2.8mm zipcord suitable for internal use, lszh, yellow Technical Specification 400 N Max. Operating Load 60% of the Max. Pulling Load Max. Compressive Load 1000 N Repeated Impact 0.5 N.
F I BRE OP TI C C A B LI NG ➤ Specialist Cables SPECIALIST cables Our specialist cable manufacturing service Our production services include fibre optic cable manufacturing. Using our European based manufacturing facility we are able to produce and deliver specialist cables within a Three Week Time-frame.
➤ Military TIGHT BUFFERED 2 4 6 Strong resistant construction using Steel Wire Braid armouring. ➤ Flexible metallic armoured design. ➤ Gel free tight buffered construction. ➤ Suitable for terminating directly. ➤ Double Jacket moisture proof sheath. ➤ Enhanced crush resistance design. ➤ Military BREAK OUT Technical Specification – TIGHT BUFFERED Fibres ➤ 8 12 Diameter (mm) 5 5 5.5 6 6.
F I BRE OPT I C C A B LI NG ➤ Specialist & NGTS Cables ➤ Dielectric armoured distribution ➤ Very strong cable construction ➤ Low smoke halogen free emission ➤ Flame ➤ High retardant flexibility ➤ Moisture protected ➤ Ultraviolet ➤ Suitable resistance and rodent protected. for indoor and outdoor applications. ➤ fire resistant ➤ Independent tested. ➤ Unitube design offering up to 24 fibres in a 4.00mm gel filled loose tube. ➤ Layer ➤ low of fire retardant tape.
HOW TO CREATE OUR FIBRE OPTIC PRE-TERMINATED ASSEMBLY PART NUMBERS Populate both fields with the required connections: LC SC FC ST MJ E2 EA ESC Populate this field with the required number of fibre cores. Eg: 04 = 4 core 08 = 8 core 12 = 12 core x PT xx Populate this field with the type of fibre you require: 3 4 5 6 9 = 50/125um = 50/125um = 50/125um = 62.
F I BRE OP T IC C A B LI NG ➤ Pre-Terminated Cables ➤ MTP Breakout Assemblies ➤ Used to breakout MTP assemblies into standard connection types. ➤ ugged construction enables direct connection into active R components. ➤ Tails can be staggered to aid installation. ➤ Available in Singlemode and Multimode. Part No: MTP-BO-X-XX-12 ➤ MTP – MTP Pre-Terminated Assemblies ➤ Ideal for connecting between panels and cassettes. ➤ Available in Multimode and Singlemode and up to 72 Fibres.
Hand wound cable reels are ideal for redeployable cable use for various applications such as outside broadcast, temporary CCTV applications, military requirements and emergency repairs. ➤ Available in various sizes. ➤ Twin carry handles and crank handle for transportation. ➤ Oversize ventilated drum centre for cables requiring large bend radii (SK version). ➤ uild to order service for special plug, sock and reeling B requirements.
F I BR E OP TI C C A B LI NG ➤ Patchcords patchCORDS Applications: ➤ Used to connect to the active components of a fibre optic system usually from the front of a patch panel. Applications: – Telecommunication – LAN and WAN – Broadband – CATV – Network – FTTP Features: ➤ ➤ LSZH cable sheath as standard. ➤ ESCON, E2000, FDDI, DIN, SMA and MU available upon request. ➤ Angled connector patchcords available. ➤ Can be labelled/branded and packaged to your requirements.
➤ SC Patchcords ➤ Easy push – pull installation. ➤ Meet Bellcore GR-326 requirements. ➤ Duplex clip available separately. ➤ Available in angled version. ➤ ST Patchcords ➤ Bayonet coupling minimises the rotation needed to mate the connector. ➤ Singlemode and multimode versions available. ➤ Available in angled version. ➤ Threaded metallic coupling provides durable reliable connections.
pigtails FI B R E OP TI C C A B LI NG ➤ Pigtails HOW TO CREATE OUR FIBRE OPTIC pigtail PART NUMBERS Populate this field with the required length: Populate this field with ’PG’ to reflect ‘Pigtail’ x PG Populate this field with the type of fibre you require: 3 4 5 6 9 = 50/125um = 50/125um = 50/125um = 62.5/12um = 09/125um Eg: xx x Populate both fields with the required connections: LC = LC SC = SC FC = FC ST = ST MJ = MTRJ E2 = E2000 SCA = SC-apc OM3 OM4 OM2 OM1 OS1 1 = 1m 1.5 =1.
SC, ST, FC and LC Connectors Features: Applications: ➤ Low ➤ Telecoms. ➤ FTTH (Fibre To The Home). ➤ CATV ➤ Local Area Networks. insertion loss. ➤ Standard ➤ Zirconia connector housing. ➤ Available Specification in multimode and singlemode. ➤ All connectors come with a 900um and 3mm boot (LC also with a 2mm). ➤ All and CCTV. ferrule. standard connectors available in angled version. Mode Singlemode Multimode Typical Insertion loss 0.20dB 0.
F I B R E OP TI C C A B LI NG ➤ Connectors ➤ FC Connector ne ➤ O piece with pre-domed zirconia ferrule is designed for fast, easy assembly and polishing. ➤ Meets JIS C-5970 standard. errule ➤ F ➤ One is keyed during manufacture to optimise performance. step crimp with jacket retention. ➤ Corrosion ➤ Boot FC SINGLEMODE CONNECTOR resistant body. colour options available.
SC, ST, FC, LC and MTRJ ADAPTORS Features: Applications: Specification ➤ Low insertion loss. ➤ Local Area Networks. Mode Singlemode Multimode ➤ Easy to handle. ➤ FTTH (Fibre To The Home). Typical Insertion Loss 0.20 0.30 ➤ Environmentally stable. ➤ CATV and CCTV. Operating Temperature -40 – +80C -40 – +80C ➤ Compliant with IEC, TIA. ➤ Telecoms. Vibration ➤ Hybrid adaptors available. 10 - 55 HZ (3 axis) 10 - 55 HZ (3 axis) Durability (500 matings) 0.12dB Max 0.
FI B R E OP TI C C A B LI NG ➤ Adaptors ➤ ST Adaptor ST MULTIMODE ADAPTOR ST SINGLEMODE ADAPTOR ➤ D shape as standard. ➤ D shape threaded with nuts easily installs into patch panels. ➤ Meets Bellcore GR326 and TIA 568A standard. ➤ Zinc alloy coupling body for long life. ➤ Available in a plastic or metal duplex with SC duplex footprint. ➤ Available in a plastic or metal simplex with SC simplex footprint.
Features: ➤ High return Loss ➤ Low insertion Loss ➤ 100% optic test (Insertion Loss) Applications: ➤ CATV, Metro, LANs and military ➤ Active device termination ➤ Telecommunication networks Specification Fibre Type Singlemode Multimode APC Insertion Loss ≤0.2dB ≤0.2dB Part No: Description: AD-E2-SM AD-E2A-SM E2000 Singlemode Adaptor Operating Temperature E2000 APC Singlemode Adaptor Durability ≤0.2dB –40°C to +75°C ≤0.
F I BRE OPT I C C A BLI N G ➤ Patch Panels/Wall Boxes & Enclosures Patch Panels 22 ➤ Available in black or beige. ➤ Adjustable ➤5 variations available from stock. FC, ST, SC duplex, LC duplex and LC quad. ➤1 U accept up to 24 ST, 24 FC, 12 SC Duplex, 24 LC duplex and 12 LC quad adaptors (multimode and singlemode). ➤ 2U accept up to 48 ST, 48 FC, 24 LC Quad and 24 SC Duplex adaptors (multimode and singlemode). ➤ Supplied with 4 kurly loks, panel fixing kit and a PG-11 gland.
For singlemode adaptors… JUST PUT ‘SM’ after the number of adaptors required! EG: PAT-24-Scd-s-04-SM-BK-SFE = 1U 19” SC patch panel loaded with 4 LC duplex singlemode adaptors.
F I BRE OPT I C C A BLI N G ➤ Patch Panels/Wall Boxes & Enclosures ➤ FC PATCH PANELS For singlemode adaptors… JUST PUT ‘SM’ after the number of adaptors required! EG: PAT-24-FC-s-04-SM-BK-SFE = 1U 19” FC patch panel loaded with 4 FC simplex singlemode adaptors.
➤ Available ➤ Has in 4 to 16 way. ➤ Manufactured a knockout on 3 of its sides to accommodate a cable gland. ➤ The fourth side accepts 2, 4 and 8 way SC duplex or 4, 8 and 16 ST or FC adaptors. ➤ The LC quad adaptor can be accommodated in the SC duplex hole. ➤ Can be used on a wall, desk or underfloor. ➤ Finished with 1.2mm mild steel.
F I BRE OPT I C C A BLI N G ➤ Patch Panels/Wall Boxes & Enclosures ➤ FC PATCH boxes Part No: Description: WB-04-FC 4 way FC wall mount patch box unloaded WB-04-FC-02 4 way FC wall mount patch box loaded with 2 FC SM adaptors WB-04-FC-04 4 way FC wall mount patch box loaded with 4 FC SM adaptors WB-08-FC 8 way FC wall mount patch box unloaded WB-08-FC-04 8 way FC wall mount patch box loaded with 4 FC SM adaptors WB-08-FC-08 8 way FC wall mount patch box loaded with 8 FC SM adaptors WB-16-FC 16 w
➤ Available in up to 48 way SC, 48 way ST and 96 LC. ➤ Lockable to prevent tampering. ➤ Different locks for each door. ➤ Manufactured with 1.2mm mild steel. ➤ Dimensions: 380mm x 325mm x 70mm. ➤ Finished in beige semi gloss. ➤ Enclosure is supplied with a PG-11 gland and 4 kurly loks. ➤ Ports numbered for identification.
F I BRE OPT I C C A BLI N G ➤ Patch Panels/Wall Boxes & Enclosures ➤ Splice Box ➤ Compliant with IEC670. ➤ inged lid available on the larger enclosures H (300 x 220 x 120 and 300 x 300 x 120). ➤ RAL7035 grey. ➤ Available in 8 different sizes.
➤ FOSC ➤ Suitable for use in any environment: aerial, pedestal, buried and manhole. ➤ Proven fibre management hardware. ➤ Base to dome seals on FOSC 400 are mechanical for ease of installation and re-entry. ➤ Cable seals feature a heat shrink sleeve and hot melt adhesive system that is installed with a hot air gun. ➤ Common materials, accessories and practices are used throughout the product line to simplify use, reduce inventory and enhance productivity.
F I BRE OPT I C C A BLI N G ➤ Patch Panels/Wall Boxes & Enclosures ➤ Tyco In-line Splice Enclosure ➤E nvironmentally sealed in-line enclosure for emergency repairs, in-line, and aerial cable joints. ➤ I ncludes 1 splice tray for 24 splices. ➤A further 5 additional splice trays can be ordered separately to increase capacity to 144 splices max. ➤6 cable ports (2 one side, 4 the other). 7-40mm cable dia. ➤C able ports sealed by cold wrap around gel tape. No heatshrink required.
➤ IP68 rated in-line splice enclosure for up to 24 or 48 fibres. ➤T wo cable entry ports at each end of the enclosure (no-heatshrink required). ➤S uits 10-32mm cable diameter cables (24 fibre version) or 4-26mm cables (48 fibre version). ➤R e-enterable design. Lid secured by bolts. ➤D imensions 350x155x70mm (24 fibre version) 450x85x85mm (48 fibre version). ➤ I ncludes 2 or 4 12-fibre splice trays (24 or 48 fibre versions).
F I BRE OP TI C C A B LI NG ➤ Fusion Splicers FUSION SPLICERS ➤ T-71C core aligning SPLICER Part No: SUM-T-71C The T-71C benefits from a touch screen display and can show a x700 image of the fibres. Instructional help videos are built in to the splicer’s memory for greater ease of use. The wind hood is now mirror free and uses LED’s in order to reduce maintenance issues.
Part No: SUM-FC6 Technical Specification Fibre types 125um SMF, MMF and others Fibre number S type – single fibre, M type – ribbon fibre, up to 12 core Coating types 250um primary coated, 900um secondary coated Cleave length – S type 9 – 16mm (250um fibre), 10 – 16mm (900um fibre) Cleave length – M type 10mm with fibre in Sumitomo holder Cleave angle, typical 0.
F I BRE OPT IC C A B LI NG ➤ Sumitomo Accessories Sumitomo Accessories ➤ DC power cord Enables the T-71C to be powered from a standard 12v vehicle power supply. Part No: Description: SUM-PC-V11 DC power cord for vehicle 12V outlet ➤ power cord Replacement power cord for the T-71C. Part No: Description: SUM-PC-AC3 Power Cord ➤ li-ion battery Rechargeable Lithium Ion battery.
HOW TO CREATE OUR ATTENUATOR PART NUMBERS Populate this field with the type of connection required: FC SC ST LC MJ E2 Populate this field with the required polishing type: = FC = SC = ST = LC = MTRJ = E2000 AT Populate this field with ‘AT’ to reflect ‘Attenuator’ PC = PC AP = APC UP = UPC xx xx xx Populate this field with the dB requirement: 05 = 05dB 07 = 07dB ETC F I BR E OP TI C C A B LI NG ➤ Attenuators Attenuators Eg: AT-FC-02-AP = 2dB FC/APC ATTENUATOR ➤ Fixed Attenuators Features: ➤M e
FI B RE OP T I C C A BLI N G ➤ Splitters/Couplers/Mode Conditioning Patchcord Splitters/Couplers Features: ➤ InGaAsP/InP MQW DFB Laser. ➤ Lower operation current. ➤ InGaAs PD and Isolator inside. ➤ High Reliability and output power. ➤ Coaxial Package. ➤A vailable in SC / LC / FC / ST as standard, however other connection options are available upon request. ➤ olishing types such as: PC / UPC and APC are all available upon P request. Applications: ➤ Fibre optic systems/equipment.
➤ Blanking Plugs ➤ Used to fill unused ports in patch panels or wall boxes. ➤ Available in SC duplex, ST, LC and SC simplex. ➤ Colour – black. Part No: Description: p-scd sc duplex black blanking plug B Bp-lcd lc duplex black blanking plug Bp-scs sc/lc (sc simplex footprint) simplex black blanking plug Bp-st st simplex black blanking plug ➤ Cable glands Polyamide material. ➤ Colour – black or grey. ➤ Operating range -30°C to +80°C.
F I B R E OP TI C C A B LI NG ➤ Accessories ➤ 4 WAY SPLICE BRIDGE ➤ Holds up to four fibres. ➤ Comes with adhesive tab or can be screw rivet mounted. ➤F or use in a fibre optic patch panel or a wall mounted patch box. Part No: Description: Sb-4 4 way splice bridge ➤ 24 WAY Splice bridge ➤ Stores up to 24 fusion splice protectors. ➤ Available with a lid. ➤ Self adhesive or screw fixed. ➤ For use in patch panels and wall mounted enclosures. ➤ Available in blue or grey.
➤ LAPPING FILM ➤ Used to polish fibre optic connectors. ➤ Aluminium Oxide sheets available from stock in 9 different grades. ➤ Diamond sheets available upon request. ➤ Available in disc or sheet form. ➤ Available with adhesive back. Part No: Description: 9 X 13 – X – A 6X9–X–D 9 x 13” Aluminium Oxide Lapping Film 6 x 9” Diamond Coated Lapping Film X – Insert Micron Between (0.3 to 30 micron) E.g. 9X13-0.3-A = 9 x 13” 0.
F I BRE OP T I C C A B LI NG ➤ Cleaning & Consumables ➤ SWABS ➤ sed for cleaning connector ferrule end faces, adaptors and U difficult areas. ➤ Available in 1.25mm and 2.5mm. ➤ Supplied in packs of 50. Part No: Description: swab-1.25 swab-2.5 1.25mm cleaning swabs (pack of 50) 2.5mm cleaning swabs (pack of 50) ➤ ONE CLICK FERRULE CLEANER ➤ Easy pushing motion engages connector and initiates cleaner.
➤P revent the #1 cause of fibre link failure: end-face contamination. Everything needed for precision cleaning of end-faces on both patchcords and inside ports. ➤S pecially formulated solvent dissolves contaminants, neutralizes static charge and encapsulates particles for removal. ➤A range of wipers and swabs enable cleaning of all styles of fibre optic connections. ➤B y fitting in your pocket, fibre optic cleaning cards are conveniently perfect for troubleshooting.
F I BRE OPT I C C A B LI NG ➤ Cleaning & Consumables ➤ LINT FREE WIPES ➤ Non abrasive. ➤ Used to clean fibres, ferrules and connectors. ➤ Used with IPA (Isopropyl Alcohol). ➤ Supplied in boxes of 280. Part No: Description: 34155 x 280 lint free wipes ➤ PRE-SATURATED CLEANING WIPES ➤ Pre-saturated in isopropyl alcohol. ➤ Used to clean fibres and connectors. ➤ Ideal replacement for dispensing bottles and lint free wipes. ➤ Minimises ➤ Non user exposure and improves health and safety.
TOOLS TOOLS Networks Centre stocks a reputable selection of optical and copper tools; from a number of leading manufacturers. Our brand partners include: Clauss, Abeco, Ripley, Miller, Fluke and Net-C. As well as distributing tools separately, we also supply kits and can custom build to suit your requirements. For more information, please contact us.
TOOLS ➤ Cutters tools ➤ CC Series Cable CutterS ➤ Designed to cut cables up to 13mm. ➤ Designed to minimise flattening of the cable end. ➤P reformed rounded jaws automatically position the cable for optimum cutting. ➤ Precision, ➤ Durable high quality carbon steel construction. non-slip handle. Part No: Description: CC-22 CC-38 CC-60 < 9mm < 11mm < 13mm ➤ Ripley Fibre Optic Kevlar Cutter ➤ Designed to cut Kevlar strength members in fibre optic cables. ➤ Powerful quick cutting action.
➤ J acket slitting and ringing tool for 4.5mm to 25mm diameter cables. ➤A djustable height cutting blade for different sheath thickness. ➤C uts horizontally and longitudinally for end or mid-span jacket removal. Part No: Description: To-ht-325 Jacket stripping and slitting tool 4.5mm to 25mm ➤ TRI-HOLE BUFFER STRIPPER ➤T ri-Hole TOOLS ➤ Strippers ➤ Jacket stripping and slitting tool fibre stripper ideal for use in fibre preparation.
TOOLS ➤ Strippers & Crimpers ➤ Miller Fibre Optic Stripping Tool ➤ For stripping 250 micron buffer coating from 125 micron optical fibre. ➤ Precision diameter hole and V-opening in blade allow for accurate buffer coating removal. ➤ Factory set, requires no adjustment. ➤ Prevents scratching or nicking of optical fibre. ➤A ll cutting surfaces are precision formed, hardened, tempered and ground assuring precise buffer removal.
➤ Used for removing the fibre sprig during connector terminations. ➤ Made from ceramic. ➤ Dimensions 50mm square. ➤ 2 sides ground down to form cutting edge. ➤ Supplied with plastic guard to protect cutting edge. Part No: Description: CP-UNI Ceramic fibre cleave plate (stripper f780-136-000) TOOLS ➤ Scribes ➤ Cleaving Plate ➤ Carbide Tip Fibre Optic Scribe ➤ T he CS-30-W is a 30-degree wedge-tip carbide scribe 3.8mm wide for long life and simple fibre termination.
TOOLS ➤ Polishing Pucks ➤ 2.5mm and 1.25mm Stainless Steel Polishing PuckS ➤ High quality hand polishing disc for fibre optic connectors. ➤ “ Universal” design fits most 2.5mm ferrule connectors including: ST, SC and FC connectors. ➤ I nside and outside rims designed for improved hand positioning while performing the polishing operation. ➤ C hannelled, raised base allows debris to escape easily and provide for easy polishing action.
with an ergonomically designed handle, reduces hand fatigue. With JackRapid™, you’ll never punch into the palm of your hand or through drywall again. JackRapid™ is a patented jack termination tool that saves time and increases accuracy by seating and terminating all wires at once with a simple squeeze of the handle. JackRapid™ allows you to terminate jacks eight times faster than traditional impact tools - with accuracy that's unmatched.
TOOLS ➤ Kits ➤ COLD CURE TERMINATION KIT The New Net-C fibre termination kit provides all the tools required to terminate fibre cables. Using Loc Tite cold cure epoxy no power is required and the tool case can even be used as a work area for polishing. Suitable for most fibre connectors including LC, SC, ST and FC connectors. Each tool is individually located in dense foam to secure in place. Replacement consumables are available. Tool case includes: 1 x Jacket slitting and stripping tool 4.
Networks Centre distributes a low cost range of Cat5e and Cat6 copper cabling products. Products are high quality and available on a next day delivery, at exceptionally competitive prices. ➤ Cat5e Cables Patch Panels Modules Patchcords Plugs ➤ Plastics 52 52 53 53 54 C OP P ER C A B LI NG COPPER CABLING 54 ➤ Cat6 Cable Patch Panels Modules Patchcords Plugs 01403 754 233 enquiries@networkscentre.com 55 55 55 56 56 www.networkscentre.
C OP P ER C A B LI NG ➤ cat5e CAT5e ➤ CAT5e copper cableS The Net-C solid conductor 4 pair U/UTP Category 5e compliant cable is supplied in standard 305m lengths in colour coded boxes / wooden reel. Available in three different sheaths LSOH, PVC and external PE. Features & Benefits: The cable is metre marked in reverse from 305m to 0m so you are always aware of the amount of cable left in the box. Outer sheath can be specified as grey PVC, violet LSOH or now with an external grade black PE.
Specifications: ➤ Width: 25mm. ➤ Height: 50mm. ➤ Depth: 18.2mm. ➤ Material: Plastic. ➤ Termination: LSA style IDC. ➤ Colour code: T568A/B. ➤ Standard compliance: ANSI/TIA/EIA/568B.2 and ISO/IEC 11801. Part No: Nc-c5e-mod-utp cat5e utp euro module krone Features: ➤ Shallow depth. ➤ Write-on label. ➤ A/B wired.
C OP P ER C A B LI NG ➤ cat5e/Plastics ➤ CAT5e PLUGS ➤ J45 crimp-on connectors for use with stranded Cat5e twisted pair R cable. ➤ 30µ” gold plated for reliability. ➤ Made from high quality polycarbonate. ➤ 100 in each pack. Part No: Description: NC-C5E-PLUG-UTP-SOL Cat5e UTP solid crimp plug RJ45 NC-C5E-PLUG-UTP-STR Cat5e UTP stranded crimp plug RJ45 PLASTICS ➤ FACE PLATES Net-C plastic faceplates are suitable for all standard UK outlets. Available bevelled or Flat to meet requirements.
➤ CAT6 copper cable Technical Data: ➤ Conductor: 23 AWG Plain copper. Insulation: HDPE. ➤ Construction: 4 twisted pair. ➤ Jacket: LSOH violet ➤ O/D: 6.1mm LSOH. ➤ Weight: 40kg/km LSOH. ➤ Operating Temperature: -20C to +75C. ➤ Bend radius: 4 x O/D. ➤ Pull Tension: 110 N. ➤ NVP: 65%. ➤ The Net-C solid conductor 4 pair U/UTP Category 6 compliant cable is supplied in standard 305m lengths in colour coded boxes.
C OP P ER C A B LI NG ➤ cat6 ➤ CAT6 PATCHCORDS Our copper patchcords are manufactured to exceed the performance characteristics as detailed in ISO-11801 and EIA/TIA-568B. They are manufactured using stranded cables and high quality plugs and can be supplied with PVC or LSOH sheath as standard. All leads come with moulded, snag free boots to ease installation. Available in a variety of colours and lengths to suit. Leads are supplied fully tested and in individual bags. Features: ➤ ROHS Compliant.
Networks Centre offers KBC’s ruggedised networking products, designed to suit hazardous environments. AMP Tyco’s range of standard 10/100 and 1000 base are also available from stock, as well as their 19” slot-in chassis systems. We also stock the highly competitively priced range of Net-C 10/100 media converters, available in both singlemode and multimode. 01403 754 233 ➤ Industrial Media Convertors 58 ➤ Media Convertors 59 ➤ Industrial Switches 61 ➤ Tyco Switches 63 enquiries@networkscentre.
N E T W OR K I NG ➤ Industrial Media Convertors industrial media convertors ➤ KBC McG1 10/100/1000 Ethernet media converter The KBC MCG1 series is a fully ruggedised 10/100/1000 Ethernet media converter. It supports transmission of an Ethernet channel over either one or two, multimode or singlemode optical fibres. The plug-and-play design ensures ease of installation with no electrical or optical adjustment needed. LED indicators are provided to show the operational status of the unit clearly.
Features: ➤ IEEE 802.3at compliant. ➤ Wide operational temperature range. ➤ Mode A Mode B Switchable. ➤ 100 BASE-FX on 2 fibre units. ➤ 10/100 auto sensing. ➤ Multimode and singlemode interfaces. ➤ Single and dual fibre. Part No: Description: K-FTLS1-M2-WSB 10/100 Ethernet media converter, 802.3at PSE, 2 no. MM fibres. Wall mount K-FTLS1-M1A-WSB 10/100 Ethernet media converter “A” TX, 802.3at PSE, 1 no. MM fibre.
NETWOR K I NG ➤ Media Convertors ➤ Gigabit Ethernet Media Converters ➤ Extend Gigabit Ethernet 10/100/1000 BaseT LAN signals from S/UTP Cat5e structured cable over either multimode or singlemode optical fibres using the 1000Base-SX and 1000BaseLX standards. ➤A utomatically negotiate the MDI/MDI-X crossover state eliminating the need for crossover RJ45 cables which simplifies installation.
➤ KBC ESUL8 Ethernet series Features: ➤ The KBC ESUL8 Ethernet series is an entry level, ultra low power, unmanaged industrial switch. The series is designed for use in a wide range of operating temperatures in non–environmentally conditioned, industrial applications. The switch provides connectivity for up to eight 10/100 Mbps twisted pair copper ports which are automatically configured and, with plug-and-play design, provides ease and speed of installation.
NETWOR K I NG ➤ Industrial Switches ➤ KBC ESUL6-FL2 Ethernet series ports. All ports are automatically configured and the plug-and-play design provides ease and speed of installation. Redundancy is offered through the DT-Ring technology that recovers cable or port failures automatically in less than 100ms. The series is available in either DIN rail or wall-mount configurations. Features: ➤ Supports DT-Ring recovery, <100ms. ➤ Redundant power input. ➤ Alarm output for power supply.
➤ 8 Port UTP/STP Compact Ethernet Switch ➤E asy ➤8 to install. UTP / STP 10/100Mbit/s copper ports. ➤R obust metal case helps to protect the very compact switches from damage. ➤M eets all relevant industry standards for 10Mbit/s and 100Mbit/s ➤F ully compatible with 10Base-T and 100Base-TX Fast Ethernet standards. ➤S upports full or half duplex auto-negotiation together with N-Way compatibility on the UTP ports. ➤ L ED indicators for monitoring and diagnostics.
NETWOR K I NG ➤ Tyco Switches ➤ 16 Port Smart Switch II With Optional Fibre Uplink ➤W ire speed switch fabric provides non-blocking performance. ➤R ack mountable into 19” racks using the 2 supplied brackets. ➤ I nternal ➤C ost effective, compact and easy to install. ➤ I deal for connecting medium size workgroups over a fibre 100Mbit/s or 2 x 1000Mbit/s Ethernet link. ➤U plink module can be plugged into the front of the switch which supports a range of optical or gigabit copper ports.
➤ GigaPlus 66 ➤ Cat6Plus 69 ➤ 10GPlus 72 ➤ System Accessories 74 ➤ Copper Patchcords & Pigtails 76 ➤ Fibre Optic Patchcords & P igtails 78 ➤ Fibre Optic Adaptors 79 ➤ Optical Patch Panels 81 Patch Panels 81 ➤ Fibre Optic Cable 82 ➤ Blolite Air Blown Fibre System 01403 754 233 77 ➤ Fibre Optic Connectors ➤ Unloaded Optical 84 ➤ FibrePlus 86 ➤ Optical MPO Solution 87 ➤ Datacentre Cabinets & Racks 88 enquiries@networkscentre.
B r a n d - R e x ➤ GigaPlus ➤ shielded Cable GigaPlus F/UTP 100 Ω 4x2xAWG 24/1 premium grade class D/Cat5e cable to support Gigabit Ethernet protocol combined with good EMI/ RFI protection for installations in horizontal and backbone areas. The cable is compliant with: ISO/IEC 61156-5, EN 50288-2-1 and ANSI/TIA/EIA 568C.
The Tool-free Jack offers true Cat5e performance and is fully compatible with Brand-Rex UK and continental UNI style faceplates and products. The jacks come supplied in boxes of 12; termination instructions are on the rear of the box. No termination tool is required. Each jack has integral colour code wiring labels. GigaPlus Shielded and Unshielded Snap-In-Jacks offer true Category 5e component performance.
B r a n d - R e x ➤ GigaPlus ➤ shielded Patch Panels The GigaPlus 19" rack mounted patch panel offers true Category 5e component performance using patented state of the art printed circuit technology. Available in 24 port versions, these panels have a cable management / strain relief feature built into the rear mounted grounding bar. All outlets are numerically identified with an additional writable surface for ease of port naming.
Cat6Plus F/FTP, 100 Ω 4x2xAWG 23/1 premium grade class E/ Cat6 cable to support Gigabit ethernet protocol for installation in horizontal and backbone areas. The cable is compliant with: ISO/IEC 11801, ANSI/EIA/TIA 568C ISO/ IEC 61156-5 and EN 50288-5-1.
B r a n d - R e x ➤ Cat6Plus ➤ Shielded Jacks The Brand-Rex Cat6Plus Screened Snap-In-Jack offers true Category 6 component performance using a new patented contact array design. The jack is backward compatible and also fully compatible with all Brand-Rex’s UK and continental style faceplates and products. Jacks are supplied with a short form installation instruction.
The Cat6Plus 19" rackmounted 0.5U 24 port Shielded patch panel offers a port density which delivers 48 terminations in a single U height with true Category 6 component performance using a patented contact pin array design. The robust and easy to install patch panel employs a conventional termination method that affords the installer the maximum punch down accessibility for wire termination.
B r a n d - R e x ➤ 10GPlus ➤ shielded cable 10GPlus S/FTP 100 Ω, 4x2xAWG 23/1 is a premium grade class EA/ Augmented category 6 Cable to support 10 Gigabit Ethernet protocol for installation in horizontal and backbone areas. 10GPlus F/FTP 100 Ω, 4x2xAWG 23/1 is a premium grade class EA/ Augmented category 6 Cable to support 10 Gigabit Ethernet protocol for installation in horizontal and backbone areas. The cable is compliant with: ISO 61156-5 and ANSI/TIA/EIA and EN50288-10-1.
The 10GPlus Shielded Tool-free Snap-in-Jack is easy and quick to install, its compact construction and multiple cable-entry options make it the most flexible product of its type available. It is smaller and shorter than traditional products, allowing it to fit more comfortably into confined spaces. The jack also features an adjustable management element allowing for a rear, top or sideentry cable termination.
B r a n d - R e x ➤ System Accessories System Accessories ➤ Modular Panels The Brand-Rex Angled Snap-in-Jack Patch Panel is a 1U 24 Port Panel that facilitates cord routing directly into the rack vertical side management thus rendering horizontal cable managers redundant. The increased rack density not only saves valuable space but also offers a panel that eases bending stresses on the cord while maximising performance.
Brand-Rex supplies a comprehensive range of plastic accessories to provide an outlet solution for wall, trunking and floorbox applications. These accessories have been designed to be used in conjunction with Brand-Rex Snap-In Jacks. All UK style faceplates are supplied with M3.5 mounting screws and are available in both modular or low cost shuttered versions. Backboxes can also be supplied to allow for retrofit application where outlets are required to be surface mounted.
B r a n d - R e x ➤ Copper Patchcords COPPER Patchcords HOW TO CREATE OUR brand-Rex copper PATCHCORDS PART NUMBERS Populate this field with the required boot type: Populate this field with required length: X = Crossover HBS solid (only for 10GPlus) S = Solid H = Standard HB = Blade style for GigaPlus only BB = Blade style for Cat6Plus only B = Blades style for 10GPlus only 020 = 2 Metres 010 = 1 Metre etc BR xxx PC x xxx xxx Populate this field with the type of cable you require: Populate this fi
For use in permanent connections between transmission equipment and patch panels or interconnect / cross-connect between panels. Patchcords are pre-constructed with connectors. These include small form factors such as LC and MTRJ as well as SC, FC and ST. Based on 2.80mm sub units (1.9mm SFF) these ruggedised cables are sheathed with LSHF material making them suitable for internal use. ➤ M anufactured to comply with: ISO/IEC 11801,EN50173 -1, ANSI TIA/EIA 568B.
B r a n d - R e x ➤ Fibre Optic Connectors Fibre Optic Connectors ➤ FC-PC Connector FC-PC singlemode connector kits comprise of a nickel plated brass body with a precision ceramic ferrule, stepped crimp sleeve, 2 x colour coded strain relief boots and a 0.9mm boot. C ompliant with IEC 60874-7 Strain Relief Colour Code: SM - Yellow, Black ➤ Typical Insertion Loss: SM - 0.
➤ SC Simplex Adaptor SC Adaptors comprise of a polymer outer body and inner assembly fitted with a precision alignment sleeve. Multimode with metal sleeve. Singlemode with Ceramic Sleeve. ➤ Compliant with IEC 60875-14 ➤ Max. Insertion Loss: MM - 0.3dB, SM - 0.1dB Part No: Description: BR-BHCSCMM001 BR-BHCSCSM001 SC Singlemode (Blue) SC Multimode (Beige) ➤ SC Duplex Adaptor SC Duplex adaptors comprise of a polymer outer body and an inner assembly fitted with a precision alignment sleeve.
B r a n d - R e x ➤ Fibre Optic Adapters ➤ LC Duplex Adaptor LC duplex adaptors (BHCLCXM001) comprise of a polymer body with a precision alignment sleeves. They have the outer dimensions of a simplex SC style adaptor. Part No: Description: BR-BHCLCMM001 BR-BHCLCSM001 LC Multimode (Duplex) (Beige) LC Singlemode (Duplex) (Blue) ➤ LC Quad Adaptor LC quad adaptors (BHCL4XM001) comprise of a polymer body with precision alignment sleeves.
offers a flexible and highly versatile solution for optical splicing and patching. The panel’s shallow depth allows it to be installed within the majority of standard racks and wall mounted enclosures. The integrated design features ensure that even once installed panels can be readily reconfigured to accommodate the changing needs of today’s high speed networks.
Fibre Optic Cable B r a n d - R e x ➤ Fibre Optic Cable HOW TO CREATE OUR Brand-Rex fibre optic cable PART NUMBERS BR-HF Populate this field with required cable construction: Populate this field if armour is required: PDC = tight buffered UNI = loose tube STA = steel tape armoured xxx xxx xx Populate this field with the fibre type: xx LU Populate this field with the required number of cores: 062 = 62.
Fire Survival cable is used in areas where critical data transmission must continue when the building structure in which it is installed is on fire. For this reason its use in large public buildings such as datacentres, airports, railway stations, stadia and onshore/offshore industrial structures is becoming increasingly common.
B r a n d - R e x ➤ Blolite Customer requirements in the ever-advancing communications market continues to grow, stretching scarce bandwidth resources and truly testing the performance of today’s networks. In choosing cabling system solutions, whether for small, medium or large multiple site locations, server farms or co-location datacentres, network planners have some serious issues to consider.
Microduct cabling systems are popular solutions for building flexibility into a network, they can be populated when needed and leave spare capacity for future growth. The ability to defer initial installation costs is a key advantage of an air blown cable installation over traditional cable installations. The new Microblo air blown loose tube microduct cable is available with fibre counts from 2 to 12 in a 2.5 mm diameter package.
B r a n d - R e x ➤ FibrePlus ➤ UnLoaded Optical Patch Panel Modular panel assemblies are used to terminate backbone cables at the distributor or the equipment outlet ends and also to interface to patchcords or equipment cords. The 1U panel fits into standard 19” racks and accommodates up to 3 plug in units. LGX boxes, MPO adaptor plates or blanking plates are available as units. ➤ T he system is simple and flexible and accommodates up to 216 fibre terminations in 1U.
Part No: Description: BR-MTMLGXLC00812 LG X ‘clip in’ module with 12 LC s on the front face BR-MTMLGXLC00824 LG X ‘clip in’ module with 24 LC s on the front face BR-MTMLGXLCOM312 LG X ‘clip in’ module with a pinned MPO at the rear, 12 LC s on the front face, OM3 performance BR-MTMLGXLCOM324 LG X ‘clip in’ module with 2 pinned MPOs at the rear, 24 LC s on the front face, OM3 performance BR-MTMLGXLCOM412 LG X ‘clip in’ module with 12 LC s on the front face, OM4 performance BR-MTMLGXLCOM424 LG X
Bra nd -Re x ➤ High Density Copper Cabinet System The Brand-Rex datacentre cabinets and racks range offers the ultimate solution for management of fibre and copper in datacentres and telecoms rooms. The unique, flexible and effective range is the ideal solution to support the mission critical applications of the modern day datacentre.
Description: pre configureD cabinets BR-DRCRAK45U0905A2 Access HDC Frame - 45U x 900mm wide x 500mm deep, Black (including pallet, 2 x 150mm cable tray) Part No: Description: High Density Racks BR-DRCDOR45U09DS2 HDC Double Steel Doors 45U x 900mm wide, Black BR-DRCDOR45U09SS2 HDC Plain Steel Door 45U x 900mm wide, Black BR-DRCRAK45U0905C12 Configuration 1 - Stand Alone HDC Frame - 45U x 900mm wide x 500mm deep, Black (Including pallet and all BR recommended accessories Double Doors, Side Panels,
B r a n d - R e x ➤ Distribution Rack Distribution Equipment Rack The Distribution Equipment Rack (DER) provides increased accessibility and has a flexible modular design that can be configured to suit small, corporate and internet datacentres. The DER set can be configured as an open frame to manage the cabling at the distributors or as a closed cabinet to safely secure servers and storage equipment. The designs are modular and flexible.
Description: Part No: Description: DISTRIBUTION EQUIPMENT RACK (DER) DER Shelves BR-DRCRAK42U0610A2 BR-DRCSHF1U0192 1U 19" Front Mounted Cantilever lack Rack 42U, 600x1000 Frame B c/w Standard Corner Plates, Jacking Feet, 19" Rails, No Doors, No Panels, 2 x Plain Panels,Vented Panel, Black Panels c/w Black Trim BR-DRCRAK42U0808A2 Black Rack, 42U 800x875 Frame c/w Standard Corner Plates, Jacking Feet, 19" Rails, No Doors, No Panels, 2 x Plain Panels, Vented Panel, Black Panels c/w Black Trim She
Br a nd -Re x ➤ High Density Fibre Cabinet System High Density Fibre Cabinet System The Brand-Rex High Density Fibre Cabinet and Panel offers the ultimate solution for management of fibre in datacentres and telecoms rooms. The solution is designed with an emphasis on minimising on-site installation times, accessibility to cabling and modularity to enhance its operational flexibility. The cabinet is the first fibre cabinet designed to solve the problems of today’s networking environment.
Description: HDFC Assemblies BR-DRCRAK45U0905F12 Part No: Description: HDFC ACCESSORIES ssembly 1 - Stand Alone HDFC, Black A Includes Frame, Doors, Side and Top Panels, Label and Document Wallet BR-DRCBPL1U172 17’’ 1U Blanking Panel BR-DRCBPL2U172 17’’ 2U Blanking Panel BR-DRCRAK45U0905F22 Assembly 2 - Back to Back HDFC, Black BR-DRCBPL5U172 17’’ 5U Blanking Panel Includes 2 Frames, Doors, Side, Top and Centre Panels, Baying Kits, Labels and Document Wallets BR-DRCRAK45U0905F32 Assembly 3
Bra nd - R e x ➤ High Density Open Entry Rack High Density Open Entry Rack The Open Entry Rack (OER) offers a simple, modular and easy-to-install system that can also be applied to small, corporate and internet datacentre environments. It can be used standalone or in multiples. It is an ideal solution for the main distribution area.
96 ➤ Copper ➤ Fibre ➤ QuickNet™ ➤ Opticom® ➤ Panzone™ ➤ Net-Access™ 96 ➤ CoolBoot™ 118 ➤ Cable Management 118 NetKey™ 120 ➤ Cables ➤ Modules & Patchcords ➤ Connectors ➤ Patchcords & Pigtails ➤ Patch Panels ➤ Fibre Enclosures ➤ Face Plates ➤ Racks & Cable Management 120 fiberrunner™ 130 gridrunner™ 133 ➤ Baskets ➤ Brackets ➤ Accessories 133 01403 754 233 enquiries@networkscentre.
pand uit ™ ➤ Pan-Net™ Copper PAN-NET™ COPPER cassettes, patch panels, and patchcords) to provide a reliable, modular, end-to-end solution. Panduit™ offers end-to-end solutions for all twisted pair copper cabling applications. TX™ Copper Cabling Systems provide reliable network performance for the most demanding high-speed and bandwidth-demanding applications while exceeding the latest industry standards.
Universal 24 port patch panels specifically designed to comply with Cat5e performance requirements. DP5e patch panels adopt a printed circuit board design with a punch down termination system. Wiring scheme T568A and T568B are clearly identified on the back of the panel. Write-on area on the front of the panel allows clear identification for easy installation and future moves, adds and changes. Panduit™ Punch down patch panels are available in angled versions, with 24 or 48 ports.
pand uit ™ ➤ Pan-Net™ Copper Category 6 UTP ➤ TX6000™ UTP Cable ➤ E xceeds requirements of ANSI/TIA-568-C.2 Category 6 and ISO 11801 2nd Edition Class E channel standards. ➤ E xceeds requirements of ANSI/TIA-568-C.2 and IEC 61156-5 Category 6 component standards. ➤ M eets requirements of IEEE 802.3af and IEEE 802.3at for PoE applications. ➤ T hird party tested to comply with ANSI/TIA-568-C.2. ➤ I nstallation temperature range: 32°F to 122°F (0°C to 50°C).
➤ UTP PVC Part No: Description: PT-UTPSP1MY PT-UTPSP1.5MY PT-UTPSP2MY PT-UTPSP3MY PT-UTPSP4MY PT-UTPSP5MY 1m patchcord. Grey. UTP Category 6 1.5m patchcord. Grey. UTP Category 6 2m patchcord. Grey. UTP Category 6 3m patchcord. Grey. UTP Category 6. 4m patchcord. Grey. UTP Category 6 5m patchcord. Grey. UTP Category 6 ➤ Solid Core UTP LSOH ➤ UTP LSOH Part No: Description: Part No: Description: PT-UTPSPL1.5MY PT-UTPSPL2MY PT-UTPSPL2.5MY PT-UTPSPL3MY PT-UTPSPL5MY 1.5m patchcord. Off white.
pand uit ™ ➤ Pan-Net™ Copper ➤ MINI-COM™ Category 6A UTP 10GIG™ TX™ Jacks performance. ➤ O ptional termination tool (EGJT) reduces termination time by 25%, ideal for high volume installations. ➤ C an be re-terminated a minimum of twenty times. ➤ B lue termination cap designates Category 6A performance and provides positive strain relief; helps control cable bend radius and securely retains wires. ➤ T erminate 4-pair, 22 – 26 AWG, 100 ohm, solid or stranded twisted pair cable.
➤ O ptional patchcord colour bands snap on and off individual patch cables offering endless colour-coding options. ➤ O ptional RJ45 lock-in device blocks unauthorised removal of cable, IP phone, other networking equipment, or critical connection. ➤ Solid Core UTP ➤ E xceed requirements of ANSI/TIA-568-C.2 Category 6A, IEEE 802.3an-2006, and ISO 11801 Class EA channel standards. ➤ M eet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications.
pand uit ™ ➤ Pan-Net™ Copper Matrix Technology The end-to-end system has been engineered to enable long and short cable channels, meet the requirements of the highest density datacentre applications, operate in advanced PoE applications and allow for the co-mingling of other category cables. The key to this technology is a tape placed directly beneath the outer jacket on which small, discontinuous metallic elements are positioned in a matrix pattern.
➤ ➤ ➤ ➤ O ptional termination tool (EGJT) reduces termination time by 25%, ideal for high volume installations. ➤ C an be re-terminated a minimum of twenty times. ➤ R ed termination cap designates Category 5e performance and provides positive strain relief; helps control cable bend radius and securely retains wires. ➤ T erminate 4-pair, 22 – 26 AWG, 100 ohm, solid or stranded shielded twisted pair cable. ➤ E xceed requirements of ANSI/TIA-568-C.2 Category 5e, IEEE 802.
pand uit ™ ➤ Pan-Net™ Copper Category 6 Shielded ➤ TX6000™ FTP Cable ➤ TX6000™ S/FTP Cable Part No: Description: PT-PFC6004LG-ED PT-PFL6004DG-ED FTP Category 6 PVC 500m. Light Grey Part No: Description: FTP Category 6 LSOH 500m. Dark Grey. PT-PSFL6004DG-ED FTP Category 6 LSOH. 500m.
➤ 10 GIG™ U/FTP Cable ➤ I nstallation temperature range: 0°C to 50°C (32°F to 122°F). ➤ O perating temperature range: -20°C to 60°C (-4°F to 140°F). ➤ D escending length cable markings enable easy identification of remaining cable which reduces installation time and cable scrap. ➤ C able supplied on a reel. Part No: Description: PT-PUFL6X04WH-KD Category 6a 4-pair U/FTP shielded ➤ E xceeds requirements of ANSI/TIA-568-C.2, IEEE 802.
pand uit ™ ➤ Pan-Net™ Copper ➤ All Metal Patch Panels ➤ A ccept Mini-Com™ Modules for shielded applications. ➤ P rovide write-on areas for port identification. ➤ C PT removal tool allows easy moves, adds, and changes of shielded jack modules. ➤ M ount to standard TIA/EIA 19" rack or 23" racks with optional extender bracket. Part No: Description: PT-CP24BLY 24-port all metal modular patch panel. 1U. (for shielded jacks only) PT-CP48BLY 48-port all metal modular patch panel. 1U.
Part No: Description: PT-CPPLA24WBLY Modular angled 24 port patch panel unloaded. 1U PT-CPPLA48WBLY Modular angled 48 port patch panel unloaded. 2U. PT-CPPLA72WBLY Modular angled 72 port patch panel unloaded. 2U ➤ UK Faceplates ➤ Individual modules snap in and out of provided insert. ➤ Single or double gang configurations. ➤ Excellent for copper and fibre applications. ➤ Shutters protect modules when not in use.
panduit ™ ➤ Pan-Net™ Fibre PAN-NET™ FIBRE ➤ OPTI-CORE™ Internal Fibre Cable U sed in intra-building backbone, building backbone, and horizontal installations for riser (OFNR), plenum (OFNP), and general-purpose environments ➤ A vailable in 6, 12, and 24-fibre counts in a “single jacket” design, and in 36, 48, 72, 96 and 144-fibre counts in a “subunit” design ➤ M ultimode (OM4, OM3, OM2, and OM1) and singlemode (OS1/ OS2) fibre available ➤ S heath markings provide positive identification, quali
SC to SC Patchcord LC to LC Patchcord ➤ I nsertion loss and return loss data recorded for every singlemode patchcord. ➤ L ifetime traceability of test data to a Q.C. number on each patchcord. ➤ H ighest quality flame retardant fibre optic cable with tight-buffered coating on each optical fibre. Part No: Description: SC-SC 1M DUPLEX 9-125UM ➤ Pass all TIA/EIA-568-B.3 performance requirements. ➤ 1 00% factory inspected end face geometry in compliance with Telcordia GR-326-CORE, Issue 3.
panduit ™ ➤ Pan-Net™ Fibre ➤ Sc Opticam™ Pre-Polished Connectors ➤ TIA/EIA-604 FOCIS-3 compliant connectors. ➤ Exceed TIA/EIA-568-B.3 requirements. ➤ C onnector backbone and boot colours follow TIA/EIA-568-C.3 suggested colour identification scheme. ➤ Insertion loss: 0.3dB average (multimode and singlemode). ➤ R eturn loss: >26dB (10Gig™ multimode), >20dB (multimode), >50dB (singlemode). ➤ Q uick installation; provide field termination in less than half the time of field polish connectors.
Pre-loaded fibre drawers provide a pre-configured, ready-to-install system for managing fibre optic terminations, connections and patching in a 1U rack mount enclosure. The pre-loaded enclosure accommodates both field termination and field splicing, it supports trunk cable entry via PG style glands, blown fibre glands and metric knockouts with rubber grommets.
panduit ™ ➤ Pan-Net™ QuickNet™ QuickNet™ MTP* Interconnect Round Cable Assemblies ➤ Multimode 10Gig™ 50/125Ω (OM3 and OM4) ➤ Pass all TIA/EIA-568-B.3 performance requirements. ➤ FOCIS-5 compliant. ➤ Insertion loss per mated pair: 0.50dB typical; 0.75dB max. ➤ B ackward compatible with all 50/125um (OM2) MPO or MTP* system requirements. ➤ Factory terminated and 100% tested for insertion loss. ➤ T ested per IEEE 802.
Part No: Description: PT-FRME1U Holds up to three FAP or FMP adapter panels or FOSM splice modules. Bidirectional sliding drawers provides front and rear access to fibres. Dimensions: 1.74"H x 17.00"W x 14.20"D (44.0mm x 432.0mm x 361.0mm) PT-FRME2U Holds up to six FAP or FMP adapter panels or FOSM splice modules. Bidirectional sliding drawers provides front and rear access to fibres. Dimensions: 3.48" H x 17.00" W x 14.20" D (88.0mm x 432.0mm x 361.
panduit ™ ➤ Pan-Net™ Opticom® Opticom® FibRE Adapter Patch Panels ➤ Fibre Adapter Patch Panels ➤ Mount to standard EIA 19" rack rails. ➤S tandard version holds both QuickNet™ Fibre Optic Cassettes and Opticom® Fibre Adapter Panels. ➤A ngled version holds Opticom® Fibre Adapter Panels and matches Mini-Com™ Angled Patch Panel profile. ➤U se with Opticom® Rack Mount Fibre Trays to protect Part No: Description: PT-CFAPPBL1 F lat fibre patch panel.
pand uit ™ ➤ Pan-Net™ Panzone™ ➤ PANZONE™ Consolidation Point Boxes ➤ D esigned to accept up to 2 RU of active electronics as deep as 17.5" and up to 6 RU of standard 19" passive connectivity (PZICEA only). ➤ Work with standard office raised floor tiles. ➤ I nclude Cool Boot® Raised Floor Air Sealing Grommet for quick moves, adds, and changes. ➤ D esigned to accept up to 8 RU standard 19" passive connectivity (PZICE only). ➤ Accept all Mini-Com™ Modules.
panduit ™ ➤ Pan-Net™ Panzone™ ➤ PanZone™ wall mounted switch/panel enclosure ➤ H old 12 RU of active and passive network equipment plus two additional RU for power strips and small electronic devices (modems, routers, etc.). ➤ S tructurally engineered to swing freely even under maximum load capacity. ➤ T hermal management design (vents, perforated doors, and optional fan) optimises airflow for improved heat dissipation; ideal for high heat load PoE enabled switch applications.
➤ NET-ACCESS™ Enclosures ➤ Modular cable management fingers easily mount to the front and/or back of all four cabinet posts. ➤ Accommodate equipment mounting depths up to 25.9" (658mm). ➤ Innovative, fully integrated, electrically bonded cabinet with a single ground connection to guard against EMI and ESD, and provide a safe current path to ground. ➤ Four adjustable equipment mounting rails – available in cage nut or #12-24 threaded with printed rack space identification.
pand uit ™ ➤ Pan-Net™ Cable Management CoolBoot™ Part No: Description: pt-RFG6X8Y CoolBoot™ raised floor air sealing grommet. Overall size of 152mm x 203mm. Allows for 106mm x 157mm capacity pt-RFG6X8SMY CoolBoot™ raised floor surface mount air sealing grommet. Overall size of 152mm x 203mm. Allows for 106mm x 157mm capacity pt-RFG6X8Y pt-RFG8X8Y CoolBoot™ raised floor air sealing grommet. Overall size of 203mm x 203mm.
Part No: Description: PT-CMR19X84 19 45U Standard Rack PT-PRV6 PatchRunner™ 45U vertical management 152.4mm (6") PT-PRD6 PatchRunner™ 152.
panduit ™ ➤ Netkey™ Cables Netkey™ cables ➤ netkey™ Category 6 UTP Copper Cable ➤ M eets ISO/IEC Category 6/Class E and Category 5e/Class D performance requirements. ➤ D escending length cable markings enable easy identification of remaining cable. ➤ T hird party verified.
➤ Netkey™ Cat5e, CAT6 & Cat3 Copper Jack Modules pt-NK688MIW pt-NKP5E88MIW pt-NK688MIW-Q pt-NKP5E88MIW-Q ➤ Meet all industry performance standards for Category 6, 5e and 3. ➤ P unchdown jack modules are 100% performance tested and individually serialised for future traceability. ➤ S nap in and out of keystone openings for easy moves, adds and changes. ➤ Universal label includes T568A and T568B wiring schemes.
panduit ™ ➤ Netkey™ Connectors Netkey™ connectors ➤ netkey™ LC Connectors – Pot and Polish Termination Part No: Description: PT-NKFLCSMWH LC 62.5/125μm multimode simplex connector. EI (Electric Ivory) body, WH (White) boot PT-NKFLCSMBL LC 50/125μm multimode simplex connector. EI (Electric Ivory) body, BL (Black) boot pt-NKFLCSMWH PT-NKFLCSMBL LC 50/125μm OM3/OM4 multimode simplex connector. EI (Electric Ivory) body, AQ (Aqua) boot PT-NKFLCSMBL LC singlemode simplex connector.
➤ netkey™ Fibre Optic Patchcords and Pigtails SC to SC Patchcord LC to LC Patchcord SC to LC Patchcord C ompliant with TIA/EIA 568-C.3-1 and ISO/IEC 11801, IEC-61754-7 (international) and TIA-604-5 (FOCIS-5). ➤ P atchcords and pigtails include OM3 fibre or OM1, OM2, or OS1 fibre in 900μm tight-buffered fibre, 1.6mm or 3.0mm duplex zipcord jacketed cable or 1.8mm duplex zipcord jacketed cable. ➤ 1 00% performance tested assures that patchcords and pigtails are standard compliant. ➤ Q .C.
pand uit ™ ➤ Netkey™ Patch Panels patch panels ➤ netkey™ copper patch panels – category 6 Part No: Description: PT-NK6PPG12WY Category 6, 12-port punchdown patch panel.
PT-NKPPA24FMY Part No: Description: PT-NKPPA24FMY 24-port flush mount angled modular patch panel, 1 RU PT-NKPPA48FMY 48-port flush mount angled modular PT-NKPPA48FMY patch panel, 2 RU PT-NKPP24FMY 24-port flush mount modular patch panel, 1 RU PT-NKPP48FMY 48-port flush mount modular patch PT-NKPP24FMY panel, 2 RU PT-NKPP48FMY ➤ netkey™ Moulded modular/punchdown Patch Panels Part No: pand uit ™ ➤ Netkey™ Patch Panels ➤ netkey™ Flush Mount Patch Panels Description: PT-NKPP24P 24-port m
pand uit ™ ➤ Netkey™ Fibre Enclosures ➤ Wall Mount Bracket Part No: Description: PT-WB89D Wall mount bracket.
➤ netkey™ face plates ➤ A ccept all NetKey™ Modules. ➤ A vailable in a variety of port densities. ➤ O ptional labels for easy port identification. ➤ C olour: Arctic White. Part No: Description: PT-NK6CSAW-X Single gang, 25.4mm x 32mm, PT-NK6CSAW-X shuttered adapter. Compatible with LJU6C frame. Accepts one NetKey Module PT-NKFPLUKF2SAW Single gang, 86mm x 86mm, shuttered faceplate with label and icon slots. Accepts two NetKey Modules. Includes two M3.5-0.
pand uit ™ ➤ Netkey™ Face Plates ➤ netkey™ inserts Part No: Description: PT-NKHS2AW-X 1/2 size, sloped modular insert. Accepts two NetKey Modules PT-NKHS2SAW-X 1/2 size, sloped, shuttered modular insert. Accepts two NetKey Modules. PT-NKHS2SAW-X pt-NKHS2AW-X ➤ adaptor Part No: Description: PT-CBFAW 45mm x 45mm adapter, accepts one 1/2 size module insert ➤ netkey™Modular Furniture Faceplates ➤ C olour: Off white. Part No: Description: PT-NK4MFIW Snap-on modular furniture faceplate.
Part No: Description: PT-R2P 19 EIA rack aluminium rack. 2134mm x 514mm x 76mm (84.0"H x 20.3"W x 3.0"D). 45 RU PT-WMPV45E NetRunner Front and Rear Vertical Cable Manager with dual hinged cover wire retainers and side mount brackets. 45 RU PT-WMPSE PatchLink Front and Rear Horizontal Cable Manager with dual hinged cover. 1 RU PT-WMP1E PatchLink Front and Rear Horizontal Cable Manager with dual hinged cover.
panduit ™ ➤ FiberRunner™ FIBERRUNNER™ ROUTING SYSTEMS Panduit™ provides innovative solutions for routing fibre optic and high performance copper cabling to and between equipment racks within a datacentre, telecommunications room or service provider facility.
No: Part No: Description: 1 pt-FR6X4**2 6x4 FIBERRUNNER® Channel 2m 2 pt-FRHC6**2 6x4 Snap-On Hinged Cover 2m 3 pt-FRSHC6**2 6x4 Split Hinged Cover 2m 4 pt-FRBC6X4** 6x4 QUIKLOCK™ Coupler 5 pt-FRRA6X4** 6x4 Horizontal Right Angle Fitting pt-FRRASC6** Optional Split Cover 6 pt-FRH456X4** 6x4 Horizontal 45° Angle Fitting pt-FRH45SC6** Optional Split Cover 7 pt-FRT6X4** 6x4 Horizontal Tee Fitting pt-FRTSC6** Optional Split Cover 8 pt-FRFWC6X4** 6x4 4-Way Cross Fitting pt-FRFWCSC6** Optional Split Cover
panduit ™ ➤ FiberRunner® 13 14 No: Part No: Description: 13 pt-FROVRA6X4** 6x4 Outside Vertical Right Angle Fitting pt-FROVRASC6** Optional Split Cover 14 pt-FRIV456X4** 6x4 Inside Vertical 45° Angle Fitting 15 pt-FROV456X4** 6x4 Outside Vertical 45° Angle Fitting pt-FROV45SC6** Optional Split Cover 16 pt-FRRF6FR4** 6x4 to 4x4 FiberRunner® Reducer 15 Fitting 16 pt-FRRF6FR4SC** Optional Split Cover 17 pt-FRRF64** 6x4 FiberRunner® Fitting to 4x4 Fiber-Duct™ Channel Reducer Fitting 18
The GridRunner™ Underfloor Cable Routing System is a wire basket pathway designed to route and manage network data and power cabling beneath the raised floor in a datacentre. This innovative system supports high cable capacities, protects cables from damage to improve network performance and is fully electrically bonded to facilitate proper grounding.
Prism’s BIG ‘O’ Cabinet A dynamic solution to the challenges of cable management. ORDER U P 6PM FOR Next Day Delivery TO ON ALL ST OCK ITEM S Prism’s NEW BIG ‘O’ cabinet Prism’s Big ‘O’ advanced high density patching frame offers a dynamic solution to the challenges of cable management. It is designed to meet the evolving demands of high density cabling applications in the data centre field. It is user friendly, flexible and durable.
Networks Centre offer Net-C’s comprehensive range of telecom/voice products, at extremely competitive prices. 01403 754 233 ➤ Cable 136 ➤ Connection Strips/Boxes/ Panels 137 ➤ Adaptors 138 enquiries@networkscentre.com www.networkscentre.
T elecom s / Voice P rod ucts ➤ Cabling Telecoms/Voice Products HOW TO CREATE OUR VOICE CABLING PART NUMBERS Populate this field with the number of pairs required: Eg: NC 10 50 100 etc… xxxxxx xx Populate this field with the type of cable required: E/ leave blank If you require an earth populate this field with the letter (E) if not leave blank.
Cable Core Wrapping: The following range of multi-pair internal telephone cables are manufactured in accordance with BT type CW1308. These cores are twisted into pairs and the required number of pairs are then laid up in either layers for cables containing up to and including 25 pairs, or in units for items of 32 pairs and above, the pairs are colour coded for ease of identification. An earth conductor of 1.38mm plain copper is included where shown. Features: ➤ 0.5mm conductor size.
T eleco ms / Voice P rod ucts ➤ Connection ➤ 20 PAIR VOICE CABLE CONNECTION BOX ➤ Accepts two 237a style connection blocks. ➤ Available in internal and external. Part No: Description: Nc-cb-201a Net-C 20 pair internal connection box ➤ 50 PAIR VOICE CABLE CONNECTION BOX ➤ Accepts up to five 237a style connection blocks. ➤ Available in internal and external.
PRISM are one of the UK's leading manufacturers of high quality server racks, data cabinets and server rack accessories. Networks Centre distributes their complete range of products, offering a next day delivery service. ➤ FI & PI Cabinets 140 ➤ Wall Mounted Cabinets 142 ➤ Fan Trays 143 ➤ Power Distribution 143 ➤ Cable Management 144 ➤ Plinths 145 ➤ Shelves 146 C A B I NETS & racks CABINETS & racks ➤ High Density Patching Frames 147 01403 754 233 enquiries@networkscentre.com www.
C A B I NETS & racks ➤ Cabinets cabinets HOW TO CREATE OUR cabinet PART NUMBERS Width: 6 = 600mm 8 = 800mm FS for floor standing CAB Populate this field with 'CAB' to reflect cabinet FS xxx Populate this field with the height: 12U 18U 27U 42U 45U Door type G = Glass M = Mesh xx xx If you require a FI server cabinet insert SVR-FI xx xx Populate this field with the depth: 6 = 600mm 8 = 800mm 10 = 1000mm 12 = 1200mm xx Colour BK or GY (NB: Any depth over 1000mm becomes a server) Eg: CAB-FS-45
Typical Applications: ➤ Datacentres / Comms rooms. ➤ 19" Server Equipment Housing. ➤ Communication Systems. ➤ Structured cabling / multi vendor installations. Features: The internal mounting profiles have been designed to accommodate all of today's server manufacturers products and with the use of the mid profiles supplied and number of different depths of products, can be accommodated within the one enclosure. ➤ Enclosed glass front door with mesh surround.
C A BI N ETS & racks ➤ Wall Mounted Cabinets wall mounted cabinets HOW TO CREATE OUR wall cabinet PART NUMBERS Door type: PERSPEX = G (as standard) STEEL = S WM indicating it's a wall mounted cabinet CAB Populate this field with 'CAB' to reflect cabinet WM xx xx Populate this field with the height: 6 = 6U 9 = 9U 12 = 12U xx Populate this field with the depth.
➤ roof mounted Part No: Description: Cab-ft-2-rm Cab-ft-4-rm 2 way roof mounted fan tray Part No: Description: Cab-ft-4-hs 4 way high speed roof mounted fan tray 4 way roof mounted fan tray ➤ high speed roof mounted C A B I NETS & racks ➤ Fan Trays fan trays ➤ rack mounted ➤ Quiet fans (27db) fitted as standard. ➤ High speed fans are available for increased heat dispersion. ➤ oof and rack mounted fans are suitable for all wall mounted R cabinets. ➤ Supplied with a 3 metre main lead.
C A BI NETS & racks ➤ Cable Management cable management ➤ Blanking Panels Part No: Description: Cab-bp-1u Cab-bp-2u Cab-bp-3u 1U blanking panel 2U blanking panel 3u blanking panel ➤ brush strip Panels Part No: Description: Cab-bsp-1u-bk Cab-bsp-2u-bk 1u brush strip panel black Part No: Description: Cmb-4-1u-bk Cmb-4-2u-bk 1U 4 ring cable management 2u brush strip panel black ➤ cable management bars ➤ CABLE TRAYS 2U 4 ring cable management ➤ cage nuts, screws and washers ➤ Pack of 50 Par
plinths Part No: C A B I NETS & racks ➤ Plinths ➤ Pi Data Cab Plinths Description: CAB-PL-6-6 PI Data Cabinet Plinths 600mm X 600mm CAB-PL-6-8 PI Data Cabinet Plinths 600mm X 800mm CAB-PL-8-6 PI Data Cabinet Plinths 800mm X 600mm CAB-PL-8-8 PI Data Cabinet Plinths 800mm X 800mm X100mm X100mm X100mm X100mm ➤ Fi Server Plinths Part No: Description: CAB-FI-PL-6-10-ARM FI 600 X 1000 Plinth With Opening Stabilising Arm CAB-FI-PL-6-12-ARM FI 600 X 1200 Plinth With Opening Stabilising Arm
C A B I NETS & racks ➤ Shelves SHELVES ➤ Fixed Vented ➤ Front mount Part No: Description: Cab-sh-450-f Cab-sh-570-f Cab-sh-720-f-svr pi 450mm fixed vented shelf pi 570mm fixed vented shelf pi 720mm fixed vented shelf ➤ Telescopic Part No: Description: Cab-sh-200-fm Cab-sh-300-fm Cab-sh-400-fm pi 1U 200mm front mount shelf pi 1U 300mm front mount shelf pi 2U 400mm front mount shelf ➤ Rotating ➤ I deal for housing standard keyboards, which are wider than the 19" aperture.
The HDPF racking system is designed for the installation of structured cabling products as well as a number of active products. Utilsing the vertical management arms supplied with the product, this allows the client to accomodate moves and changes and access to all cables throughout the life of the installation. The HDPF can be installed in a stand alone installation or back to back, to provide additional depth and space utilisation.
FRONT DOORS C A BI N E T S & racks ➤ High Density Patching Frames ➤ Plain Steel Doors Part No: Description: CAB-HDPF-PD-27U 27u Plain Steel Front Door (1173mm H) CAB-HDPF-PD-42U 42u Plain Steel Front Door (1839mm H) CAB-HDPF-PD-45U 45u Plain Steel Front Door (1972mm H) ➤ Glazed Front Doors Part No: Description: CAB-HDPF-GD-27U 27u Glazed Front Door (1173mm H) CAB-HDPF-GD-42U 42u Glazed Front Door (1839mm H) CAB-HDPF-GD-45U 45u Glazed Front Door (1972mm H) ➤ Split Mesh Front Doors Part No:
Networks Centre stock and distribute Fluke Networks’ complete range of copper and optical testers; for frontline trouble shooting and certification. Fluke Networks are the number one leading network tester brand and can offer a solution for any kind of testing eventuality. Networks Centre also stock a cost efficient range of optical light source and power meters, visual fault locators and thermal imaging cameras; manufactured by OWL, Hobbs and Flir.
T E ST & M E A S U R EM ENT ➤ Copper Fibre Certification copper fibre certification ➤ DTX-Cable Analyzer At a Glance: ➤ DTX significantly reduces total certification costs up to 33% a year. ➤ T hree times faster than existing testers with 9-second Cat6 autotest independently verified by UL to meet ISO Level IV and TIA Level IIIe Accuracy requirements. ➤ nalyse test results and create professional test reports using A LinkWare reporting software.
Fluke Networks specify a comprehensive range of kits for copper and fibre testing. Conveniently packaged to include test leads and other essential items it’s the best way to purchase. Part No: Description: Part No: Dtx-1800-m dtx-1800 with dtx-mfm2 mm fibre modules Dtx-1200-ms dtx-1200 with dtx-mfm2 mm and dtx-sfm2 sm fibre modules Dtx-1800-mso dtx-1800-ms with dtx quad otdr module. Includes fibreinspector mini. Nfc-kit-case, launch fibre and test reference cables.
T E ST & M E A S U R EM ENT ➤ Copper Fibre Certification ➤ DTX-Cable Analyser ACCESSORIES Part No: Description: Dtx-pla002prp dtx cat6a permanent link adaptor plug replacement parts Dtx-pla002 dtx cat6a permanent link adaptor Dtx-10gkit dtx-1800 alien crosstalk analyzer kit includes permanent link and channel adaptors Dsp-pm06 Personality module for dtx-pla001 set of two Dtx-tera dtx class f tera connector test kit contains permanent link and channel adaptors Dtx-pla002s Dtx-pla011 dtx cat6a perma
CableIQ is the ideal tester for the installation and maintenance technician. It has storage capabilities and fault finding functions and is capable of testing twisted pair, coax and audio cables. CableIQ is the first cabling bandwidth tester for network technicians. It gives even the most novice tech the vision to see what speeds existing cabling can support, quickly isolate cabling from network problems, and discover what is at the far end of any cable.
T E ST & M E A S U R EM ENT ➤ Copper Fibre Certification ➤ Cable IQ ACCESSORIES A wide range of accessories are available for the CIQ to aid cable fault finding. From additional coax adapters to remote office identifiers, these help to enhance the value of your investment.
Today’s communications technicians have a lot more problems to deal with than just the cabling. They have to rule out a whole host of potential cable and service issues before determining the cause of a connection problem. Is there telephone voltage? What’s the polarity? Is there an Ethernet switch at the far end? Is PoE available? MicroScanner2 acknowledges this, giving technicians high power vision to verify today’s most common voice, data, and video services.
T E S T & M EA S UR EMENT ➤ OTDR Testing ➤ Fibre Certification The DTX-CLT CertiFiber® Optical Loss Test Set allows you to accurately certify two fibres concurrently over two wavelengths according to custom requiremenerts or established industry specifications.
Part No: Description: OF-500-M10 OptiFiber Datacenter-Ready Certifying OTDR (MM) I ncludes: Mainframe (OF-500), battery, MM OTDR/OPM/LL module (OFTM-5612B), 62.5µm and 50µm launch fibers, CDs with LinkWare and manuals, user guide, 32 MB MMC, USB cable, AC adapter, carrying strap, soft protective carrying case, 200x/400x inspection camera, MMC reader; all accessories for testing SC and LC OF-500-MS35 OptiFiber Enterprise-Ready Certifying OTDR (MM/SM).
T E S T & M EA S U R EMENT ➤ Fibre Fault Finding fibre fault finding ➤ FibER QuickMap The Fluke Networks Fiber QuickMap is an enterprise fibre troubleshooter that quickly and efficiently locates connections and breaks in multimode fibre. By instantly providing distances to failures such as high loss and high reflectance incidents, Fiber QuickMap is the must-have troubleshooter for any technician who works with fibre.
Combining test leads, power meter and visual fault locator with the Fibre One Shot make a comprehensive fault finding package.
T E S T & M EA S U R EMENT ➤ Fibre Loss Test Kits Fibre Loss test Kits ➤ Simplifiber® PRO Rugged dual wavelength LED multimode and Laser singlemode sources with SC adapter, power meter has six calibrated wavelengths and result storage.
➤ Fluke Inspection Scopes The Fluke FT120 fibre viewer has a x200 magnification and is suitable for inspecting connectors with 2.5mm ferrules. For connectors with 1.25mm ferrules, an adapter is available. It has an on board filter for eye safety.
T E ST & M EA S U R EMENT ➤ Fibre Accessories Fibre ACCESSORIES ➤ Test Reference Cords and Launch Leads Launch Fibres OTDR'S require the use of long launch fibres at the beginning and/ or end of a fibre link, in order to measure the loss and reflectance of connectors, at the ends of the fibre being tested. Fluke Networks launch fibres come in a small convenient protective case and available in common fibre types and connections.
➤ NetTool Series 2 Pro everything you need to quickly resolve even the toughest connectivity problem. Plus, with the monitoring and authentication option, you'll have the power to identify port-based security threats and maintain user connectivity in 802.1x environments.
T E S T & M EA S U R EMENT ➤ Network Testers ➤ Link Runner Front-line technicians are the first line of defense against problems in the physical and link layers of the network. LinkRunner improves your troubleshooting and escalation accuracy by helping you to quickly identify if a problem is the network or the PC NIC. ➤ L ink – Determine whether the drop is active, identify its speed, duplex capabilities and service type. 10/100 Mbps ➤ P ing – Verify connectivity to key devices.
Annual Unit Calibration 24/7 Technical Support FREE Software Updates Online Training Access Fluke Networks GOLD Support Benefits Loan Units During Repairs T E ST & M EA S UR EMENT ➤ Gold Support ➤ GOLD SUPPORT FREE Accessory Replacement Members Only Discounts Gold Support is Fluke Networks annual maintenance package. Membership ensures you are never without an up-to-date, calibrated tester in full working order.
TES T & MEA S UR EMENT ➤ OWL owl ➤ Zoom Tester The ZOOM II is one of the world's most economical and precise fibre optic power meters, delivering professional performance and a complete feature set for optical loss testing in both multimode and singlemode networks. The ZOOM II is calibrated at four commonly used industry standard wavelengths (850, 1300, 1310, and 1550), which makes it an ideal choice for both multimode and singlemode testing.
Networks Centre is proud to distribute FLIR Thermal Imaging Cameras. FLIR have been pioneers in the commercial infrared camera industry and has been supplying thermography and night vision equipment to science, industry, law enforcement and the military for over 50 years.
T E ST & M E A S U RE M ENT ➤ Flir Thermal Imaging Cameras ➤ flir i3/i5/i7 FLIR i3/i5/i7 are the smallest, lightest and most affordable thermal imaging camera on the market. They are incredibly easy to use and require no former experience. It really is a matter of "point-shootdetect" to obtain high-quality thermal images that will immediately give you the thermal information you need.
S EC UR I TY security LILIN are one of the world’s leading providers of IP Video solutions. They are the first company in the World to introduce ONVIF Cameras and other conformant products. With the security market migrating from analogue to IP it’s important to partner with a brand that offers support from project conception to completion. Lilin has over 30 years experience and is dedicated to offering our customers the most appropriate IP solutions that are easy to install and operate.
S EC UR I TY ➤ Dome Cameras dome cameras ➤ Day/Night Internal Dome The IPD-112 features a day/night CCD which means the camera will switch to monochrome when light levels drop to increase sensitivity and allow the camera to survey in low light conditions. A varifocal lens enables you to adjust the focal length to suit your needs. Features: ➤ H igh definition. ➤ 3-9mm varifocal lens. ➤ IR cut filter. ➤ H.264 and JPEG streaming. ➤ Internal use only. ➤ Audio input. ➤ True day/night.
The camera benefits from a 3-way gimbal and dual H.264 and JPEG streaming. A varifocal 3-9mm lens enables the focal length to be adjusted to meet individual requirements. These cameras can also be remotely viewed on an iPhone, iPad, Blackberry and other Smartphones. Features: One of our most popular cameras, the IPR-31 Series benefits from either 16m or 21m IR illumination resulting in the provision of quality images in total darkness. Utilising H.
S EC UR I TY ➤ Dome Cameras ➤ 1080P HD Dome IP Camera Features: Part No: Description: LI-IPD-2220ES4.3 1080P HD Dome IP camera, CMOS, 4.3mm Lens, PoE ➤ Full HD 2 megapixel CMOS image sensor. ➤ True H.264 AVC/MPEG-4 part 10 real-time video compression. ➤ H.264 and Motion JPEG multi -profile video streaming. ➤ 3D noise reduction (MCTF). ➤ 2D WDR function. ➤ Digital PTZ supported. ➤ Face / Tampering / Audio / Motion detection alarm function. ➤ Built-in highly sensitive microphone.
➤ INTERNAL & EXTERNAL PTZ Features: Li-ips-0254p Li-ips-0354p Li-ips-1254p The fully functional H.264 High Speed Dome range with integrated IP Video Server is the ideal choice for remote surveillance applications. These domes deliver incredible performance and functionality, yet cost little more than our standard units. Complete with a composite video output, the domes can still be controlled by RS-485 in addition to simultaneous network viewing and control.
S EC UR I TY ➤ Cameras cameras ➤ HD 720p External Day/Night with 20M IR Available in a choice of 4.3mm, 6mm or 8mm lenses, the IPR-712 Series uses ED glass and is IR corrected to prevent focus shift when the powerful IR LEDs light up. They also benefit from an IP66 rating, which allows the cameras to be installed in the most demanding environments. Features: ➤ H.264/JPEG dual streaming. ➤ Up to 16m or 21m IR range. ➤ True day/night. ➤ IR cut filter. ➤ 12Vdc. ➤ IP66 rated. ➤ ONVIF compliant.
Features: ➤ 1080P. ➤ Full HD 2 megapixel CMOS image sensor. ➤ True ➤ H.264 AVC/MPEG-4 part 10 real-time video compression. H.264 and Motion JPEG multi-profile video streaming. ➤ 3D noise reduction (MCTF). ➤ 2D WDR function. ➤ Digital ➤ Face / Tampering / Audio / Motion detection alarm function. ➤ Cable ➤ High ➤ Day PTZ supported. managed housing and bracket. S EC UR I TY ➤ Cameras ➤ HD 1080p External Day/Night WITH 35 metre ir led efficiency IR LED, radiant distance up to 35m.
S EC UR I TY ➤ Cameras ➤ HD 720p External Day/Night with 30 metre IR LED With a choice of 30m IR illumination, these HD True Day/Night cameras produce outstanding images in low light conditions. Available in a choice of 4.3mm, 6mm lenses, the IPR-614 Series uses ED glass and is IR corrected to prevent focus shift when the powerful IR LEDs light up. They also benefit from an IP66 rating, which allows the cameras to be installed in the most demanding environments. Features: ➤ Bracket included.
Features: ➤ Full HD 3.27 megapixel CMOS image sensor. ➤ True H.264 AVC/MPEG-4 part 10 real-time video compression. ➤ H.264 and Motion JPEG multi-profile video streaming. ➤ 3D noise reduction (MCTF). ➤ 2D WDR function. ➤ Digital PTZ supported. ➤ Face / Tampering / Audio / Motion detection alarm function. ➤ Cable managed housing and bracket. ➤ High efficiency IR LED, radiant distance up to 60m. ➤ Day and Night (IR cut removable). ➤ 2-way audio supported. ➤ Digital I/O: 1 in, 1 out.
S EC UR I TY ➤ Accessories ➤ HD 1080p CS MOUNT DAY/NIGHT 2 MEGAPIXEL Features: Part No: Description: LI-IPG-1022ES Day and Night 2MP HD IP Camera 1/2.7" CMOS, lens 2.8-8mm ➤ 1080P. ➤ Full HD 2 megapixel CMOS image sensor. ➤ True H.264 AVC/MPEG-4 part 10 real-time video compression. ➤ H.264 and Motion JPEG multi-profile video streaming. ➤ 3D noise reduction (MCTF). ➤ 2D WDR function. ➤ Digital PTZ supported. ➤ Face / Tampering / Audio / Motion detection alarm function.
➤ Digital Video Recorder NDR stands for Network Digital Recorder; a combination of high performance DVR and IP NVR in a familiar appliance based product. Delivering this hybrid solution was not simply a matter of adding IP recording to our current DVR range; this is an entirely new solution with a unique system architecture that provides a building block approach to system design and expansion. Specifications: Recording: SATA HDD: 1 x Internal, 1 x External.
S EC UR I TY ➤ Recorders ➤ CMX Network Video Recorder Towers Features: ➤ Central management system. ➤ Manage remote IP cameras and DVR devices. ➤ Record and manage 36 channels. ➤ Full HD recording for LILIN H.264 IP cameras. ➤ Scheduled recording. ➤ E-Map alarm or motion notification. ➤ Remote device status monitoring. ➤ Remote device manager. ➤ Device grouping and recall. ➤ PTZ controls for IP Fast Domes. ➤ Easy to use calendar for video playback. ➤ Complete operational event logs.
This is a range of high performance IP Network Video Recorders for HD Cameras. Capable of recording and displaying up to 64 Megapixel streams simultaneously, they support a wide range of IP cameras including LILIN. With a brilliantly easy time line search with a drag and drop facility for exporting clips for copying to the DVD burner or network location makes this one of the easiest NVR products to operate.
S EC UR I TY ➤ Video Encoders Video Encoders ➤ SINGLE CHANNEL VIDEO ENCODER The VS-012 is now supported by Milestone Video Management Software through the ONVIF standard. This flexible video server will suit many new and hybrid IP Video Solutions. Features: Single channel. Audio support. ➤ H.264 and JPEG dual streaming. ➤ Full D1 resolution at 720x576. ➤ Supported by Internet Explorer. ➤ One alarm input. ➤ Two relay outputs. ➤ SD card. ➤ Full duplex streaming. ➤ ONVIF compliant. ➤ 12Vdc.
The KBC FDVA series uses the most advanced digital technologies to provide excellent, repeatable performance for today’s CCTV systems. It supports transmission of one analogue composite video channel over one multimode or singlemode optical fibre. Products with one, two or four individual modules within a single unit are available, offering substantial savings in racking and power requirements on site. PAL, NTSC and SECAM video standards are fully supported.
S EC UR I TY ➤ Fibre Transmission ➤ Video and data Features: ➤ 8 or 10 bit digitally-encoded, non-compressed video transmission. ➤ Unique, 2 channel card module. ➤ Up to 28 receivers in one 3U chassis. ➤ Cost effective WDM single fibre solution. ➤ Switchable 120Ω termination and line biasing. ➤ L ED indicators provide quick diagnosis of all important system parameters. ➤ Multimode and singlemode models. ➤ Compact and 3U chassis card configurations.
PAL, NTSC and SECAM video standards are fully supported. The plugand-play design ensures ease of installation with no electrical or optical adjustment needed. LED indicators are provided to clearly display the operational status of the unit. The series is available in wall mount and 3U chassis card. Features: ➤ 1 0 bit digitally-encoded, non-compressed video transmission. ➤ D ual module 3U chassis card. ➤ C ompatible with all major ‘Up the Coax’ manufacturers’ equipment.
S EC U R I TY ➤ Fibre Transmission/KBC ➤ Chassis The KBC FR3 series chassis is a high quality 3U, 19” rack mounted card cage. It can accommodate up to 14 single slot 3U cards, or a number of various width cards, depending on the number of slots required by each individual product. Any 3U card product can be located in the FR3 chassis, in any location and next to any other model.
WI R ELES S WIRELESS KBC’s Wireless Ethernet Systems offer superior wireless connectivity in point-to-point (PtP), point-to-multipoint (PtMP) and mesh configurations. ➤ Lilin 188 ➤ KBC 189 LILIN’s “Airlive” wireless products are all external devices with built in antennas and varying frequencies, bandwidths, transmission ranges and configurations.
WI R ELES S ➤ LILIN lilin ➤ AirLive AirMax ➤ AIRLIVE WHA The AirLive, AirMax5, is the new generation of all-in-one wireless 5GHz CPE built to the highest standard. It greatly surpasses the competition in value, feature, performance, and reliability. The WHA-5500CPE is AirLive's flagship 5GHz all-in-one Outdoor CPE. It is designed with high performance and long distance in mind. From the full range 18dBi built-in antenna that can deliver up to 25km distance to the 802.
Supporting a 10/100 Ethernet interface, KBC’s WESII units provide a reliable and efficient transmission solution where it’s not possible or cost-effective to install cabling. IEEE802.11a/n and 802.11h compliance means that the WESII units operate in the license-free 5GHz band; feature MIMO technology to increase system throughput and transmission distance and comply with DFS and TPC standards (Dynamic Frequency Selection and Transmit Power Control).
The right partner for IP Video convergence HD IP Day/Night IR Cameras iMEGAPRO III 3 MegaPixel Resolution HD IP Mini Dome Cameras iMEGAPRO II 1080P Resolution Quadruple Streaming HD IP Day/Night Vandal Resistant Cameras iMEGAPRO I 1.3MP Resolution IP Camera Kits Network Video Recorder Kits with 4 HD IP Cameras.
Networks Centre stock and distributes DYMO® Rhino and Panduit™ labelling machines and labels, designed for the data and electrical markets. ➤ Dymo® Rhino™ 192 ➤ Panduit™ 196 LA B ELLI NG LABELLING As well as offering individual products we also stock and supply their comprehensive range of labelling kits. 01403 754 233 enquiries@networkscentre.com www.networkscentre.
labelling ➤ Dymo® Rhino™ Dymo® RHINO™ ➤ Rhino 6000 labeller High end labelling tool for the demanding installation industry. DYMO have introduced the Rhino 6000 machine that is so easy to use, at the same time offering you great professional labelling. In The Box: ➤ RHINO 6000 Professional Label Printer.
F I BRE OP TI Clabelling C A B LI NG ➤ ➤ standard Dymo® Rhino™ cables ➤ Rhino 5200 labeller The Rhino 5200 professional labeller has been designed for use in any industrial workplace. A tough exterior machine that produces durable labelling, the 5200 labeller can offer your business labelling results that meet with ANSI, TIA/EIA-606 labelling standards. Enhance your labelling requirements quickly and efficiently, with the many exclusive features of the Rhino 5200 labeller.
labelling ➤ Dymo® Rhino™ ➤ Rhino 4200 Features: The new DYMO® Rhino™ 4200 gets labelling jobs done fast – and done right. Easily navigate the familiar QWERTY keyboard. Use onetouch “Hot Key” shortcuts to quickly create and format wire/cable wraps, flags, Code 39 and Code 128 barcodes, fixed-Length labels, breaker labels and more. Print labels up to 19mm wide in flexible nylon, permanent polyester and durable vinyl materials – PLUS print directly on heat-shrink tubes.
LABELS K AND C I T S T A H T K STAY STUC DYMO® Industrial labels are tough, jobsite tested and UL recognised. Labels won’t smear or fade and are built with industrial-strength adhesives to resist moisture, UV light and extreme temperatures. Whether you are labelling to OSHA, ISO and ANSI colour standards or labelling in harsh conditions, DYMO® Industrial labels have you covered. DYMO® Industrial labels are designed to work exclusively with Rhino™ printers and to perform on a variety of surfaces.
labelling ➤ Panduit™ Panduit™ ➤ HandHeld Thermal Printer ➤ artial cut feature available to provide tear-apart strips of labels P or individual cut labels for application flexibility and quicker installation. ➤ arket specific labeling tools simplify label creation for network M components, panel building, and construction and maintenance.
Features: ➤ Compatible and easy setup with Panduit™ software and media. ➤ High-quality printed legends. ➤ Durable construction. ➤ Easy-Mark™ Labeling Software included with printer. ➤ Up to 4 inches per second print speed.
labelling ➤ Panduit™ ➤ labels continued Cassette Type Information PT-M300X050Y6C P1 Marker Plate 3" x .50" Yellow PT-M300X050Y7C P1 Marker Plate 3" x .50" White PT-R100X075V1C P1 Cassette, Turn-Tell Self-Lam Label, Vinyl, 1.00" W x 0.75" H, .
Cassette Type Part No Information pt-T100X000C1C-BK P1 Cassette, Continuous Tape, Nylon Cloth, 1.00"(25.4mm) x18'(5.49m), White/Black PT-T100X000CBC-BK P1 Cassette, Continuous Tape, Vinyl Cloth, 1.00" W x 12.5' L, White/Black PT-T100X000VPC-BK P1 Cassette, Continuous Tape, Vinyl, 1.00" W x 25' L, White/ Black PT-T100X000VXC-BK P1 Cassette, Continuous Tape, Vinyl, 1.
ter m s & conditions Terms & Conditions of Sale 1. Definitions transaction covered by these Conditions shall become immediately due and payable. 1.1 “Buyer / You” means the Account Applicant or person who buys or agrees to buy Goods from the Seller. 1.2 “Conditions” means the Terms and Conditions of Sale set out in this document and any special conditions agreed in writing by the Seller. 1.3 “Contract” means the contract for the sale and purchase of the Goods; 1.
F I BRE OP TI C C Ater B LI m NGs ➤ & conditions standard cables 6.4 In spite of the Seller having delayed or failed to deliver the Goods promptly, the Buyer shall be bound to accept delivery and to pay for the Goods in full providing that the delivery shall be tendered at any time within 14 days of the delivery date. 7. Cancellations 7.
ter m s & conditions 8.9 Any Goods supplied to the Buyer which are subject to restrictions or provisions imposed by the manufacturer design (including copyright, design right or other intellectual property) are supplied to the Buyer by the Seller subject to any such license restriction or provisions in respect of which the Seller will use reasonable endeavours to notify the Buyer of the same. 9. Warranty and Liability 9.1 The Seller warrants as follows: 9.1.
14.4 To the extent that any provision of these Conditions is found by any court or competent authority to be invalid, unlawful or unenforceable in any jurisdiction, that provision shall be deemed not to be a part of these Conditions, it shall not affect the enforceability of the remainder of these Conditions nor shall it affect the validity, lawfulness or enforceability of that provision in any other jurisdiction. 14.
HOW TO FI ND US How to find us LONDON East Croydon Gatwick Crawley Horsham Haywards Heath Worthing Portsmouth Brighton Gu ild f Eastbourne ad Ro ord ridge Gui ldfo rd R d l a n d s F ie ld Ln d Bea rsd en W ay Shelley D r A26 A264 A24 A 28 4 A 264 Wi c k A2 6 Old Wi ckhurs t La n e hurs t Ln Ro aks Five O A24 4 A24 D T helton Av e Ln A24 Co r s l e rst Ln Oak lton Ave W i ck h u t ts A ve Cl leton Rd Sh e l l e y A 264 F i ndon Way T Newbrid ge R e he 64 oad
Welcome to the Networks Centre catalogue… Your complete guide to our extensive product range Established in 2005, Networks Centre has fast become one of the UK’s leading Network Cabling and Security product distributors; offering an extensive range of premier cabling systems and quality networking products. Manufacturing Partners Exceeding your expectations is our number one objective Training Programmes We want you to understand how committed we are to supporting your business...
1010101101011011S BU 111000 RM AN ITDO MEOX R 1 00 01 01 00 www.networkscentre.