PLAYBACK PLAYBACK 3. Use [왘] (forward) or [왗] (back) to scroll You can use the camera’s built-in monitor screen to view images after you record them. through files on the monitor screen. Basic Playback Operation Use the following procedure to scroll through files stored in the camera’s memory. NOTES 1. Press the power Power button • Holding down [왗] or [왘] scrolls images at high speed.
PLAYBACK 1. In the PLAY mode, use [왗] and [왘] to scroll Flipping the Display through images on the monitor screen and display the one you want. The following procedure flips the image 180 degrees. This comes in handy when you want to show someone standing in front of you an image on the monitor screen. 2. Press the shutter release button and [SET] at the same time. [SET] • This flips the image 180 degrees.
PLAYBACK 3. Use [왖], [왔], [왗], and [왘] to shift the image Zooming the Display Image up, down, left, or right. Perform the following procedure to zoom the image currently on the monitor screen up to four times its normal size. 4. Press [MENU] to return the image to its original size. 1. In the PLAY mode, use [왗] and [왘] to display IMPORTANT! the image you want. • You cannot enlarge a movie image.
PLAYBACK 4. Use [왖] and [왔] to select the setting you Resizing an Image want, and then press [SET]. You can use the following procedure to change a snapshot image to either SXGA size (1280 x 960 pixels) or VGA size (640 x 480 pixels). • VGA is the optimum image size for attachment to e-mail messages or incorporation into Web pages. 1. In the PLAY mode, press [MENU].
PLAYBACK 5. Use [왖], [왔], [왗], and [왘] to move the Cropping an Image cropping boundary up, down, left, or right until the area of the image you want to extract is within the boundary. Use the following procedure when you want to crop a portion of an enlarged image and use the remaining part of the image as an e-mail attachment, Web page image, etc. 6. Press [SET] to extract the part of the image 1. In the PLAY mode, use [왗] and [왘] to scroll enclosed in the cropping boundary.
PLAYBACK • You can perform the following operations while a movie is playing. Playing a Movie Use the following procedure to play back a movie that was recorded in the movie mode. 1. In the PLAY mode, Movie icon press [왗] and [왘] to scroll through images until the movie you want to play is displayed. To do this: Do this: Fast forward or fast reverse the movie Hold down [왗] or [왘]. Pause and unpause movie playback Press [SET]. Skip forward or back one frame while paused Press [왗] or [왘].
PLAYBACK Example: When there are 20 images in memory, and Image 1 is displayed first Displaying the 9-image View The following procedure displays nine images on the monitor screen at the same time. 1. In the PLAY mode, press the zoom button ( 17 18 19 6 7 8 15 16 17 20 1 2 9 10 11 18 19 20 3 4 5 12 13 14 1 2 3 ). 3.
PLAYBACK Selecting a Specific Image in the 9image View Displaying the Calendar Screen Use the following procedure to display a 1-month calendar. While the calendar is on the display, you can select a date, which displays the first image recorded on that date. This helps to make it easy to find the images you want. 1. Display the 9-image view. 2. Use [왖], [왔], [왗], and Selection boundary [왘] to move the selection boundary up, down, left, or right until it is located at the image you want to view. 1.
PLAYBACK • Pressing [왖] while the date selection cursor is located anywhere in the top line of the calendar causes the previous month to appear. Playing a Slide Show Slide Show automatically plays back images in sequence at a fixed interval. • Pressing [왔] while the date selection cursor is located anywhere in the bottom line of the calendar causes the next month to appear. • To exit the calendar screen, press [MENU] or the ( zoom button.
PLAYBACK 3. Configure the slideshow settings. IMPORTANT! • Note that all buttons are disabled while an image change is in progress. Wait until an image is stopped on the monitor screen before performing a button operation, or hold down the button until the image stops. • Images copied from another digital camera or a computer may take longer time to appear than the slideshow interval time you specify. • See the pages indicated below for more information.
PLAYBACK ■ Selecting a Particular Image for a Slideshow To specify the slideshow images When you select “One image” as the slideshow type, the slide show displays only one image, without changing it. Use this setting when you want a particular image to remain on the display while the camera is on the USB cradle (Photo Stand feature). Perform the following steps to specify which image you want displayed. 1. Use [왖] and [왔] to select “Images”, and then press [왘]. 2.
PLAYBACK To specify the slideshow time To set the slideshow interval 1. Use [왖] and [왔] to select “Time”. 1. Use [왖] and [왔] to select “Interval”. 2. Use [왗] and [왘] to specify the time setting 2. Use [왗] and [왘] to specify the interval setting you want, and then press [SET]. you want, and then press [SET]. • You can specify a time in the range of 1 to 60 minutes. • You can specify “MAX”, or a value in the range of 1 to 30 seconds as the interval.
PLAYBACK IMPORTANT! Using the Photo Stand Feature • The battery is not charged while a Photo Stand slideshow is in progress. To charge the battery, stop the slideshow. The “Photo Stand” feature lets you specify what should appear on the camera’s monitor screen while the camera is on its USB cradle. You can play a Photo Stand slideshow without worrying about remaining battery power, or you can specify display of a particular image. 1. Set the camera onto the USB cradle.
PLAYBACK 4. Select “Rotate”, and Rotating the Display Image then press [SET]. Use the following procedure to rotate the image 90 degrees and register the rotation information along with the image. After you do this, the image is always displayed in its rotated orientation whenever it appears during a slideshow (page 88) or on your computer screen. Note that the image is rotated automatically during a slideshow only.
