User manual - EXZ450_MF_FB_na

Snapshot Tutorial

IMPORTANT!

•“È

Multi” cannot be selected for the Auto Focus area while you are using Face

Detection (page 39).

•While “Ë

Tracking” is selected, the [4] and [6] keys do not perform functions

assigned to them (page 75).

•“Ë

Tracking” cannot be selected for the Auto Focus area while you are using

Auto Shutter (page 68).

• Selecting “Ë

Tracking” can cause vibration and noise to occur due to lens

operation while tracking a subject. This does not indicate malfunction.

You can use this setting to optimize the balance between bright areas and dark areas

when shooting images.

1. In the REC mode, press [SET].

2. Use [8] and [2] to select the fourth Control Panel option from the top

(Lighting).

3. Use [4] and [6] to select the setting you want and then press [SET].

• You also can optimize the balance between bright areas and dark areas in

existing images (page 98).

Optimizing Image Brightness (Lighting)

Extra

Performs a higher level of brightness correction than the “On”

setting. When this option is selected, it takes longer for the image

to be stored after the shutter button is pressed.

On Performs brightness correction.

Off Does not perform brightness correction.