User Guide

115
ADVANCED SETTINGS
i
Use the following procedure to adjust the contrast of your
images.
1. In the REC mode, press [MENU].
2. On the “Quality” tab, select “Contrast” and
then press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
You can specify one of five contrast settings from +2 (most
contrast between light and dark) to –2 (least contrast
between light and dark).
You can have the snapshot’s recording date only, or date and
time stamped in the lower right corner of the image.
1. In the REC mode, press [MENU].
2. On the “Set Up” tab, select “Timestamp” and
then press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
Example: December 24, 2007, 1:25 p.m.
Adjusting Image Contrast Date Stamping Snapshots
To do this: Select this setting:
Display the date only (2007/12/24) Date
Display the date and time (2007/
12/24 1:25pm)
Date&Time
Display nothing Off