User Guide
Table Of Contents
- UNPACKING
- CONTENTS
- QUICK START BASICS
- INTRODUCTION
- GETTING READY
- SHOOTING A SNAPSHOT
- SHOOTING A MOVIE
- USING BEST SHOT
- ADVANCED SETTINGS
- Changing the Focus Mode
- Correcting Image Brightness (EV Shift)
- Controlling White Balance
- Specifying ISO Sensitivity
- Specifying the Metering Mode
- Using the Camera’s Filter Effects
- Controlling Image Sharpness
- Controlling Color Saturation
- Adjusting Image Contrast
- Date Stamping Snapshots
- Using the On-screen Histogram to Check Exposure
- Other Useful Recording Functions
- VIEWING SNAPSHOTS AND MOVIES
- EDITING IMAGES
- USING AUDIO
- MANAGING YOUR FILES
- DELETING FILES
- OTHER SETTINGS
- Configuring Camera Sound Settings
- Turning the Startup Screen On or Off
- Specifying the File Name Serial Number Generation Rule
- Changing the Camera Date and Time Setting
- Using World Time
- Changing the Display Language
- Changing the USB Port Protocol
- [_] (REC) and [>] (PLAY) Button Settings
- Formatting Built-in Memory
- PRINTING
- USING THE CAMERA WITH A COMPUTER
- APPENDIX
36
GETTING READY
IMPORTANT!
• Use the special charger (BC-11L) to charge the special
lithium ion battery (NP-20). Never use any other type of
charger device. Attempting to use a different charger can
result in unexpected accident.
• Charging the battery while it is still warm immediately after
removing it from the camera can result in only partial
charging. Give the battery time to cool before charging it.
• Battery discharges slightly even when it is left without
loading it into the camera. Because of this, it is
recommended that you charge the battery immediately
before you need to use it.
• Charging the battery may cause interference with TV and
radio reception. If this happens, plug the charger into an
outlet that is further away from the TV or radio.
To load the battery
1.
Open the battery cover.
While pressing the battery cover, slide it in the direction
indicated by the arrow.