E Digital Camera User’s Guide Thank you for purchasing this CASIO product. • Before using it, be sure to read the precautions contained in this User’s Guide. • Keep the User’s Guide in a safe place for future reference. • For the most up-to-date information about this product, visit the official EXILIM Website at http://www.exilim.
Accessories As you unpack your camera, check to make sure that all accessories shown below are included. If anything is missing, contact your original retailer. Rechargeable lithium ion battery (NP-130) USB-AC adaptor (AD-C53U) USB cable To attach the strap to the camera Attach strap here. * The shape of the power cord plug varies according to country or geographic area.
Read this first! • The contents of this manual are subject to change without notice. • The contents of this manual have been checked at each step of the production process. Feel free to contact us if you notice anything that is questionable, erroneous, etc. • Any copying of the contents of this User’s Guide, either in part or its entirety, is forbidden. Except for your own personal use, any other use of the contents of this manual without the permission of CASIO COMPUTER CO., LTD.
Contents Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Monitor Screen Contents and How to Change Them . . . . . . . . . . . . . . . . . . .
Shooting with Artistic Effects . . . . . . . . . . . . . . . . . . . . . . . . (ART SHOT) . . 61 ] Saving a Second Normal Image When Shooting With HDR Art . . . . . . . . . . . . . . . . . . . . . . . . .(Double (HDR Art)) . . . 63 Shooting with Triple Shot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 ]\ Recording Movies 65 To record a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 ] Audio. . . . . . . . . .
Shooting with Continuous Auto Focus . . . . . . . . . . . . . . (Continuous AF) . Shooting with Face Detection . . . . . . . . . . . . . . . . . . . . . (Face Detection) . Turning Digital Zoom On or Off . . . . . . . . . . . . . . . . . . . . . . (Digital Zoom) . Reducing Wind Noise during Movie Recording . . . . . . . (Wind Noise Cut) . Recording Beautiful Portraits . . . . . . . . . . . . . . . . . . . . . .(Make-up Level) . Correcting Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rotating an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Rotation) . Resizing a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Resize) . Cropping a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Trimming) . Copying Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Copy) . Dividing Up a Continuous Shutter Group . . . . . . . . . . . . . . (Divide Group) .
Configuring World Time Settings . . . . . . . . . . . . . . . . . . . . . (World Time) . Setting the Camera’s Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Adjust) . Specifying the Date Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Date Style) . Specifying the Display Language . . . . . . . . . . . . . . . . . . . . . . (Language) . Configuring USB Protocol Settings . . . . . . . . . . . . . . . . . . . . . . . . . .(USB) .
General Guide The numbers in parentheses indicate the pages where each item is explained.
Monitor Screen Contents and How to Change Them The monitor screen uses various indicators, icons, and values to keep you informed of the camera’s status. • The sample screens in this section are intended to show you the locations of all the indicators and figures that can appear on the monitor screen in various modes. They do not represent screens that actually appear on the camera. .
. Snapshot Recording (Burst Shooting) 1 2 1Continuous Shutter (CS) speed (page 56) 2Recording mode (page 28) 3Allowable CS time/number of CS images 3 6 5 (page 56) 4Continuous Shutter mode (page 55) 5Prerecord CS shots (page 57) 6Maximum CS shots (page 56) 4 .
. CS Image Viewing 1Number of images in the group (page 111) 2CS group icon (page 111) 12 .
. Configuring Monitor Screen Settings Each press of [8] (DISP) will cycle through display settings that display or hide on-screen information. You can configure separate settings for the REC mode and PLAY mode. [8] (DISP) REC mode Information on Displays setting information. Information on, histogram on Displays setting information and a histogram (page 182) on the right side of the display. Information off Hides setting information.
Quick Start Basics What you can do with your CASIO camera Your CASIO camera is packed with a powerful selection of features and functions to make recording of digital images easier, including the following main functions. ART SHOT A variety of artistic effects help to make even common, ordinary subjects become more novel and exciting. “ART SHOT” provides the following effects: HDR Art, Toy Camera, Soft Focus, Light Tone, Pop, Sepia, Monochrome, Miniature, Fisheye. *See page 61 for more information.
Blurred Background/All-In-Focus Macro (Focus Control) Focus Control shoots and analyzes a burst of multiple images and combines them in a way that produces either image in which the background is blurred or everything is in focus: from nearby objects to distant objects. *See page 59 for more information. Wide Shot With this feature, a number of images are shot and then combined to produce an image with a super-wide angle of view that exceeds the widest angle of view possible with the lens.
First, charge the battery prior to use. Note that the battery of a newly purchased camera is not charged. Perform the steps below to load the battery into the camera and charge it. • Your camera requires a special CASIO rechargeable lithium ion battery (NP-130) for power. Never try to use any other type of battery. To load the battery 1. Open the battery cover. 2. Load the battery.
Charge the Battery You can use either of the two following methods to charge the camera’s battery. • USB-AC adaptor • USB connection to a computer . To charge with the USB-AC adaptor The adaptor lets you charge the battery while it is loaded in the camera. While the camera is turned off, connect in the sequence shown below (1, 2, 3, 4).
Back Lamp Operation Back lamp Lamp Status Description Lit Red Charging Flashing Red Abnormal ambient temperature, USB-AC adaptor problem, or battery problem (page 176) Off Charging complete . To charge using a USB connection to a computer USB connection lets you charge the battery while it is loaded in the camera. While the camera is turned off, connect in the sequence shown below (1, 2).
IMPORTANT! • The first time you connect the camera to your computer with the USB cable, an error message may appear on your computer. If this happens, disconnect and then reconnect the USB cable. • A battery that has not been used for a long time, certain types of computers, and connection conditions can cause charging to take more than approximately six hours, which will trigger a timer that terminates charging automatically, even if the battery is not fully charged.
Other Charging Precautions • With the two charging methods described above, you can charge the camera’s battery (NP-130) without removing it from the camera. You also can charge the battery using an optionally available charger unit (BC-130L). Never use any other type of charger device. Attempting to use a different charger can result in unexpected accident. • This model can be charged only via from USB 2.0 specification USB port only.
Checking Remaining Battery Power As battery power is consumed, a battery indicator on the monitor screen indicates remaining power as shown below. Remaining Power High Battery Indicator Indicator Color Low * White * * White * * Red * Red indicates battery power is low. Charge the battery as soon as possible. Recording is not possible when is indicated. Charge the battery immediately. • The level shown by the battery indicator may change when you switch between the REC mode and PLAY mode.
Configuring Basic Settings the First Time You Turn On the Camera The first time you load a battery into the camera, a screen appears for configuring the display language, date, and time settings. Failure to set the date and time correctly will cause the wrong date and time data to be recorded with images. IMPORTANT! • A screen for language selection will not appear in step 2 of the procedure below if you purchased a camera intended for the Japanese market.
NOTE • Each country controls its local time offset and the use of summer time, and so they are subject to change. • Removing the battery from the camera too soon after configuring time and date settings for the first time can cause the settings to be reset to their factory defaults. Do not remove the battery for at least 24 hours after configuring settings.
To load a memory card 1. Press [ON/OFF] (Power) to turn off the camera and then open the battery cover. 2. Load a memory card. Positioning the memory card so its front is facing upwards (towards the monitor screen side of the camera), slide it into the card slot all the way in until you hear it click securely into place. Front Front 3. Back Close the battery cover. IMPORTANT! • Never insert anything besides a supported memory card (page 23) into the memory card slot.
To replace the memory card Press the memory card and then release it. This will cause it to pop out of the memory card slot slightly. Pull the card out the rest of the way and then insert another one. • Never remove a card from the camera while the back lamp is flashing green. Doing so can cause the image save operation to fail and even damage the memory card. To format (initialize) a new memory card Format a memory card on the camera before using it for the first time.
Turning the Camera On and Off . To turn power on Pressing [ON/OFF] (Power) enters the REC mode so you can record images. Pressing [p] (PLAY) while in the REC mode enters the PLAY mode, which you can use to view snapshots and movies (pages 32, 109). • You also can turn on the camera by pressing [p] (PLAY). • Pressing [r] (REC) or the shutter button while in the PLAY mode returns to the REC mode. • Take care to ensure that nothing is restricting or coming into contact with the lens as it extends.
Holding the Camera Correctly Your images will not come out Horizontal Vertical clearly if you move the camera when you press the shutter button. When pressing the shutter button, be sure to hold the camera as shown in the illustration, and keep it still by pressing your arms firmly against your sides as you shoot. Holding the camera still, Hold the camera so the flash is above the lens.
To shoot a snapshot Selecting an Auto Recording Mode You can select one of two auto recording modes (Program Auto or Premium Auto PRO) according to your digital imaging needs. Setting P Program Auto Ÿ Premium Auto PRO 1. REC Screen Icon Display Description This is the standard Auto recording mode. With Premium Auto PRO recording, the camera automatically determines whether you are shooting a subject or scenery, and other conditions.
To shoot a snapshot 1. Point the camera at the subject. If you are shooting with Premium Auto PRO, text will appear at the bottom of the monitor screen describing the type of shot the camera has detected. • You can zoom the image, if you want. Appears when the camera detects it is stationary on a tripod. Zoom controller w Wide Angle z Telephoto If the camera decides that it needs to shoot a series of images with Continuous Shutter (CS), it will display “Š”.
3. Continuing to keep the camera still, press the shutter button the rest of the way down. Full-press This records the snapshot. Snap (Image is recorded.) Recording a Movie [0] (Movie) Press [0] (Movie) to start movie recording. Press [0] (Movie) again to stop movie recording. See the following pages for details. Standard movie (STD movie): page 65 High-definition movie (FHD movie): page 68 High speed movie (HS movie): page 68 . If the image does not focus...
. Shooting with Premium Auto PRO • In addition to shutter speed, aperture, and ISO sensitivity, the camera automatically executes the following operation as required when shooting with Premium Auto PRO. – Continuous AF (page 102) – Intelligent AF (page 99) – Face Detection (page 102) • Shooting with Premium Auto PRO can cause vibration and noise to occur due to lens operation. This does not indicate malfunction. • When Shooting with Premium Auto PRO, the message “Processing Premium Auto.
Viewing Snapshots Use the following procedure to view snapshots on the camera’s monitor screen. • For information about how to play back movies, see page 109. • For information about images recorded using continuous shutter (CS), see page 111. 1. Turn on the camera and press [p] (PLAY) to enter the PLAY mode. • This will display one of the snapshots currently stored in memory. • Information about the displayed snapshot also is included (page 11).
Deleting Snapshots and Movies If memory becomes full, you can delete snapshots and movies you no longer need in order to free up storage and record more images. IMPORTANT! • Remember that a file (image) delete operation cannot be undone. • For information about images recorded using continuous shutter (CS), see page 112. • If you select “Disabled” for the “Delete Key” setting on the “¥ SETTING” menu (page 160), the delete menu will not appear when you press [2] ( ) (Delete).
. To delete all files 1. Press [p] (PLAY) to enter the PLAY mode and then press [2] ( 2. Use [8] and [2] to select “Delete All Files” and then press [SET]. 3. Use [8] and [2] to select “Yes” and then press [SET] to delete all files. ). This will cause the message “There are no files.” to appear. Snapshot Shooting Precautions Operation • Never open the battery cover while the back lamp is flashing green.
. Auto Focus Restrictions • Any of the following can make proper focus impossible.
Snapshot Tutorial Selecting the Recording Mode Your camera has a variety of different recording modes. Before recording an image, rotate the mode dial to select the recording mode that suits the type of image you are trying to record. Mode dial P Program Auto Standard Auto recording mode. This is the mode you normally should use (page 28). Ÿ Premium Auto PRO With Premium Auto PRO recording, the camera automatically determines whether you are shooting a subject or scenery, and other conditions.
M M (Manual Exposure) mode This mode gives you total control over aperture and shutter speed settings. 1 Press [SET] to open the Control Panel. 2 Use [8] and [2] to select A (aperture). 3 Use [4] and [6] to change the aperture setting. 4 Use [8] and [2] to select S (shutter speed). 5 Use [4] and [6] to change the shutter speed setting, and then press [SET]. S S (Shutter Speed Priority) mode In this mode, you select the shutter speed and other settings are adjusted accordingly.
Using the Control Panel The Control Panel can be used to configure camera settings. 1. [8] [2] [4] [6] In the REC mode, press [SET]. [SET] • You can also display the Control Panel by pressing [2]. 2. Use [8] and [2] to select the item you want, and use [4] and [6] to select the setting you want. This will select one of the Control Panel icons and display its settings.
Using the Self-timer (Self-timer) With the Self-timer, pressing the shutter button starts a timer. The shutter is released and the image is shot after a fixed amount of time. 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the 3. Use [4] and [6] to select the setting you want and then press [SET]. Setting REC Screen Icon Display (Self-timer) Control Panel option.
NOTE • The Self-timer cannot be used together with the following features. High Speed CS with Prerecord CS, Prerecord (Movie), Lag Correction, Slide Panorama, Wide Shot, Triple Shot • The Triple Self-timer cannot be used together with the following features.
Setting · Manual WB REC Screen Description Icon Display For configuring the camera manually to suit a particular light source Blank white paper 1 Select “Manual WB”. 2 Under the lighting conditions you plan to use when shooting, point the camera at a blank white piece of paper so it fills the entire monitor screen and then press the shutter button. 3 Press [SET]. The white balance setting is retained even if you turn off the camera.
Selecting a Focus Mode (Focus) 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the 3. Use [4] and [6] to select the setting you want and then press [SET]. Settings Q AF (Auto Focus) REC Screen Icon Display None Type of Shot (Focus) Control Panel option. Focus Mode Snapshot Movies Approximate Focus Range*1 Snapshot Movies 5 cm to 9 (infinity) (2.0" to 9) (Wide Angle)*2 General recording 1 cm to 50 cm (0.4" to 19.
To focus with manual focus 1. On the monitor screen, compose the image so the subject you want to focus on is within the yellow boundary. 2. Watching the image on the monitor screen use [4] (nearer) and [6] (further) to adjust focus. • At this time the image that is within the boundary will enlarge and fill the monitor screen, which aids in focusing. If you do not perform any operation for two seconds while the enlarged image is displayed, the screen in step 1 will re-appear.
Using Focus Lock Subject to be focused on “Focus lock” is a technique you can use when you want to compose an image in which the subject you want to focus on is not within the focus frame in the center of the screen. • To use focus lock, select “U Spot” or “O Tracking” for the Auto Focus area (page 99). 1. Align the monitor screen’s focus frame with the subject you want to focus on and then halfpress the shutter button. 2.
Specifying ISO Sensitivity (ISO) ISO sensitivity is a measure of sensitivity to light. 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the 3. Use [4] and [6] to select the setting you want and then press [SET]. Setting Auto ISO80 (ISO Sensitivity) Control Panel option. REC Screen Description Icon Display None Adjusts sensitivity automatically according to conditions. Lower sensitivity Slow shutter speed Less noise Fast shutter speed (Set for shooting in dimly lit areas.
Recording Beautiful Portraits (Make-up Level) The Make-up Function smoothes the skin texture of the subject and softens facial shadows caused by harsh sunlight for better looking portraits. You can select a makeup level within the range of “0 (Off)” to “+12 (Max.)”. 1. Enter the REC mode, and then press [SET]. 2. Use [8] and [2] to select the 3. Use [4] and [6] to select the Make-up Level setting you want, and then press [SET]. (Make-up Level) Control Panel option.
Correcting Image Brightness (EV Shift) You can manually adjust an image’s exposure value (EV value) before shooting it. • Exposure Compensation Range: –2.0 EV to +2.0 EV • Unit: 1/3EV 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the 3. Use [4] and [6] to adjust the exposure compensation value. (EV Shift) Control Panel option. [4]: Increases the EV value. A higher EV value is best for light-colored subjects and backlit subjects. [6]: Decreases the EV value.
Using Flash (Flash) 1. In the REC mode, press [2] ( once. 2. Use [4] and [6] to select the flash setting you want and then press [SET]. Setting > Auto Flash 3. REC Screen Icon Display None ) Flash [2] ( ) Description Flash fires automatically in accordance with exposure (amount of light and brightness) conditions. ? Flash Off Flash does not fire. < Flash On Flash always fires.
IMPORTANT! • Foreign matter on the flash window can react with the light of the flash, producing some smoke and abnormal odor. Though this does not indicate malfunction, oil from your fingers and other foreign matter when left on the flash window can become difficult to clean off later. Because of this, you should make it a regular habit to wipe the window clean regularly with a soft, dry cloth. NOTE • Take care so your fingers and the strap do not block the flash.
Specifying the Metering Mode (Metering) The metering mode determines what part of the subject is metered for exposure. 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the 3. Use [4] and [6] to select the setting you want and then press [SET]. Setting B Multi REC Screen Icon Display None (Metering) Control Panel option. Description Multi-pattern metering divides the image into sections and measures the light in each section for a balanced exposure reading.
Shooting with Zoom Your camera is equipped with various types of zoom: optical zoom, HD Zoom, Single SR Zoom, Multi SR Zoom, and digital zoom. The maximum zoom factor depends on the image size setting and the digital zoom on/off settings. Optical zoom Zooming is performed by changing the lens focal distance, so there is no deterioration of image quality. HD Zoom Allows greater zoom capabilities by cutting out a portion of the original image and enlarging it, without deterioration of image quality.
Monitor Screen Information when Zooming A variety of information is shown on the monitor screen while a zoom operation is in progress. . Zoom Mode Icons Zoom mode Focal distance (Converted to 35 mm film format.) Focusing Range (Displayed for Auto Focus, Macro Focus, and Manual Focus.) Image quality limit (Deterioration starts from here.) Zoom bar The table below shows what appears on the monitor screen based on the zoom mode.
. Interpreting the Zoom Bar During a zoom operation, a zoom bar appears on the monitor screen to show the current zoom setting. Range where image deterioration is suppressed. Deteriorated image range Wide Angle Telephoto Zoom pointer (Indicates current zoom.) Optical zoom limit point Point from which image deteriorates • The location of this point depends on the image size, the “Zoom (SR)” setting, and whether Multi SR Zoom is enabled. .
Zooming with Super Resolution (Zoom (SR)) There are two types of Super Resolution Zoom: Single SR Zoom and Multi SR Zoom. Single SR Zoom uses super resolution to expand the zoom range in which image quality deterioration is minimized. Multi SR Zoom shoots a series of High Speed CS images, which are then combined into an image that enables shooting at higher zoom ratios without loss of image quality.
Expanding the Zoom Range to Shoot Clearer Snapshots (Multi SR Zoom) This feature uses super resolution technology and multiple Continuous Shutter (CS) images to expand the zoom range for overall images of higher quality and clarity (page 54). 1. Align the mode dial with [j] (Multi SR Zoom). 2. Press the shutter button to shoot. NOTE • Multi SR Zoom is effective when you want to capture delicate textures. • The following functions are disabled when shooting with Multi SR Zoom.
. Shooting with High Speed CS With High Speed CS, recording continues as long as you keep the shutter button depressed. The table below shows the settings that can be specified for the CS speed and the number of images per High Speed CS operation. CS Speed (High Speed CS (fps)) 3 fps, 5 fps, 10 fps, 15 fps, 30 fps fps = frames per second Maximum CS Shots 5, 10, 20, 30 CS speed High Speed CS icon Maximum CS shots 1. Align the mode dial with [P] (Program Auto). 2. Press [Õ] (Continuous Shutter).
. Shooting with Prerecord CS Half-pressing and holding the shutter button causes a pre-record buffer to be continually updated with images. When the shutter button is fully pressed, buffer contents are recorded along with a series of real-time images. Use Prerecord CS when you want to make sure you do not miss fast-moving action.
10. Half-press and hold the shutter button to start pre-recording. A pre-record buffer is continually updated with images as long as the shutter button is pressed. • The camera will not emit shutter sounds as it pre-records images. • Releasing the half-pressed shutter button will cause the contents of the prerecord buffer to be deleted. 11. Full press and hold down the shutter button. This will record the images in the pre-record buffer followed by real-time recorded images.
Using Focus Control You can use Focus Control to configure the camera so the background is blurred and only the foreground subject is in focus (Blurred Background), or so everything is in focus (All-In-Focus Macro). Shooting with a Blurred Background (Blurred Background) This function analyzes a burst of consecutive images and then blurs the background behind the main subject. This creates an effect that really makes the subject stand out, just like photographs taken with a single-lens reflex camera.
NOTE • The current “Zoom (SR)” (page 54) setting is ignored when shooting with this function. • With this function, the flash setting automatically becomes ? (Flash Off). • Shooting with this function automatically sets Anti Shake to “Standard” (page 100), but large movement of the camera or subject make it impossible to achieve the desired shot. • Depending on the shooting environment, image composition, and subject, this scene may not be able to produce the desired result.
NOTE • When shooting with this function, zoom is fixed at wide angle. • When shooting with this function, the flash setting automatically becomes ? (Flash Off). • Shooting with this function automatically sets Anti Shake to “Standard” (page 100), but large movement of the camera or subject make it impossible to achieve the desired shot. • Depending on shooting conditions, image composition, and the subject you are shooting, this scene may not be able to produce the desired result.
1. Align the mode dial with [C] (ART SHOT). 2. Press [SET]. 3. Use [8] and [2] to select 4. Select the ART SHOT scene you want to use and then press [SET]. , and then press [SET]. Select from among : HDR Art, Toy Camera, Soft Focus, Light Tone, Pop, Sepia, Monochrome, Miniature, Fisheye 5. Press [SET], use [8] and [2] to select the fifth Control Panel option from the top. The intensity of the selected effect can be adjusted as described below.
. Using the Scene Information Screen To find out more about a scene, select it with the boundary on the scene menu and then rotate the zoom controller in either direction. • To return to the scene menu, rotate the zoom controller again. • To scroll between scenes, use [4] and [6]. • To configure the camera with the settings for the currently selected scene, press [SET]. NOTE • Depending on the “ART SHOT” scenes, some of the items on the menu that appears may not be usable.
Shooting with Triple Shot Triple Shot shoots a burst of three images and stores them in memory. This feature is great for making sure you don’t miss those special moments when kids are around. 1. Align the mode dial with [D] (Triple Shot). 2. Point the camera at the subject and then half-press the shutter button. The camera will start pre-recording images at this time.
Recording Movies To record a movie The following procedure explains how to record a standard (STD) movie. This camera supports Premium Auto PRO movie recording (page 66). See the pages indicated below for more information about movies. High-definition movie (FHD movie): page 68 High speed movie (HS movie): page 68 Mode dial 1. Align the mode dial with [P] (Program Auto) or [Ÿ] (Premium Auto PRO). 2. Press [MENU]. 3. Press [4], use [8] and [2] to select the “r REC MENU” tab, and then press [SET]. 4.
Recording Movies with Premium Auto PRO When Premium Auto PRO is enabled (page 28), the camera automatically make judgments about the subject, shooting conditions, and other parameters. The result is higher quality images than those produced by Program Auto recording. The shooting environment detected by the camera is displayed at the bottom of the REC mode screen. • Premium Auto PRO is enabled for FHD movies and STD movies only.
IMPORTANT! • Spending a long time using movie recording will cause the camera to become slightly warm to the touch. This is normal and does not indicate malfunction. • Shooting movies for long periods in areas where temperature is relatively high can cause digital noise (dots of light) to appear in the movie image. A rise in the camera’s internal temperature also may force movie recording to stop automatically.
Recording a High-definition Movie This camera supports recording of high-definition (FHD) movies. The aspect ratio of an FHD movie is 16:9, the image size is 1920x1080 pixels, and the frame rate is 30 fps. Image quality and image size settings cannot be changed. 1. Align the mode dial with [P] (Program Auto) or [Ÿ] (Premium Auto PRO). 2. Press [MENU]. 3. Press [4], use [8] and [2] to select the “r REC MENU” tab, and then press [SET]. 4. Use [8] and [2] to select “Movie Quality” and then press [6].
4. Use [8] and [2] to select “Movie Quality” and then press [6]. 5. Use [8] and [2] to select the frame rate (recording speed) you want and then press [SET]. A fast frame rate (such as 1000 fps) will result in a smaller image size. Movie Quality 6.
NOTE • The higher the frame rate (speed), the more lighting is required when shooting. When shooting a high speed movie, shoot in a well-lit environment. • When recording certain types of movies, the image that appears on the monitor screen may be smaller than normal. When recording a high speed movie, there are black bands along the top, bottom, left, and right of the screen. • When recording a high speed movie, light source flicker can cause horizontal bands to appear in the image.
6. Press [SET]. 7. Use [8] and [2] to select 8. Use [8], [2], [4], and [6] to select the “Prerecord (Movie)” scene and then press [SET]. , and then press [SET]. This causes ‰ (Prerecord (Movie)) to appear on the monitor screen, indicating that the camera is prerecording to its buffer. . To shoot a Prerecord Movie 1. After using the above procedure to set up the camera for Prerecord Movie, point the camera at the subject. 2. When you are ready to record, press [0] (Movie).
Recording a Movie for YouTube (For YouTube) The “For YouTube” scene records movies in a format that is optimal for uploading to the YouTube movie site, which is operated by YouTube, LLC. “For YouTube” can be used when shooting a standard (STD) movie, a high-definition (FHD) movie, or a high speed (HS) movie. 1. Align the mode dial with [b] (BEST SHOT). 2. Press [MENU]. 3. Press [4], use [8] and [2] to select the “r REC MENU” tab, and then press [SET]. 4.
Shooting a Snapshot while Shooting a Movie (Snapshot In Movie) You can shoot snapshots while movie recording is in progress. When the camera is in the Single Shot mode, you can shoot snapshots one-by-one. In the CS mode, holding down the shutter button will record up to seven consecutive images at a speed of approximately 10 images per second (fps). You can shoot a maximum total of 28 images during a single movie recording operation. 1. While a movie is being recorded, press the shutter button.
Using BEST SHOT BEST SHOT provides you with a collection of sample “scenes” that show a variety of different types of shooting conditions. When you need to change the setup of the camera, simply find the scene that matches what you are trying to achieve, and the camera sets up for it automatically. This helps to minimize the chance of ruined images due to poor exposure and shutter speed settings. .
5. Press [SET] to configure the camera with the settings for the currently selected scene. This returns to the REC mode. • To select a different BEST SHOT scene, repeat the above procedure from step 1. 6. Press the shutter button (if you are shooting a snapshot) or [0] (Movie) (if you are shooting a movie). . Using the Scene Information Screen To find out more about a scene, select it with the boundary on the scene menu and then rotate the zoom controller in either direction.
Creating and Using Your Own Setups (CUSTOM SHOT) You can register up to 999 setups, based on snapshots shot with the camera, as “CUSTOM SHOT” scenes. Selecting a registered “CUSTOM SHOT” scene configures the camera with its settings. The setups of snapshots recorded with the following modes and features can be registered as CUSTOM SHOT scenes. • Program Auto • A Mode • S Mode • M Mode • BEST SHOT (Excluding “Prerecord (Movie)”, “For YouTube”, and “HDMI TV Output”) . To register a CUSTOM SHOT scene 1.
. To record with a registered CUSTOM SHOT scene 1. Align the mode dial with [b] (BEST SHOT). 2. Press [SET]. 3. Use [8] and [2] to select 4. Select the registered “Custom Scene”, and then press [SET]. 5. Press the shutter button to shoot. , and then press [SET].
Shooting Bright Images in the Dark without Flash (High Speed Night Shot) The camera shoots a series of images and then merges them into a final image. The result is a bright image, even if shot in the dark without a flash. Shot with “Program Auto”, without flash Shot with “High Speed Night Shot” 1. Align the mode dial with [b] (BEST SHOT). 2. Press [SET]. 3. Use [8] and [2] to select 4. Select “High Speed Night Shot” and then press [SET]. 5. Press the shutter button to shoot.
Shooting with a Super Wide Angle of View (Wide Shot) With this feature, a number of images are shot and then combined to produce an image with a super-wide angle of view that exceeds the widest angle of view possible with the lens. Converted to 35 mm equivalents, the focal distances available with this feature enable shooting with approximate angles of view of 14 mm and 18 mm. 24 mm (lens widest angle) 18 mm 14 mm 1. Align the mode dial with [b] (BEST SHOT). 2. Press [SET]. 3.
8. Point the camera at the subject you want in the center of the image and then half-press the shutter button to focus. • The outer blue boundary on the screen indicates the recordable range of the image. Desired image Blue boundary Center part at the start of the shooting operation 9. Press the shutter button the rest of the way down and slowly move the camera in accordance with the instructions and arrow that appear on the monitor screen.
NOTE • The “14 mm” and “18 mm” angle of view values are approximate and are provided for reference only. Actual angle of view values are not guaranteed. • Zoom operations are not supported during Wide Shot shooting. The zoom setting is fixed at full wide angle. • This function makes it possible to shoot images with a maximum angle of view of 14 mm or 18 mm. Note, however, that shooting conditions can result in a smaller angle of view. • The following conditions are not compatible with Wide Shot shooting.
Shooting a Panorama Image (Slide Panorama) With Slide Panorama, you move the camera to compose and record multiple images, which are then combined to a panorama. This feature lets you shoot a panorama of up to 360 degrees, which is dramatically greater than the physical capabilities of the lens. • The final panorama image can be one of the two sizes shown below.
8. Press the shutter button the rest of the way down and a slide cursor will appear on the monitor screen. Slowly move the camera in the direction indicated by the arrow on the screen until the slide cursor reaches the other end of its movement range (i.e. all the way to the right when moving the camera to the right). • The camera will start composing the panorama image internally when the slide cursor reached the other end of the movement range.
Shooting with Priority on Subject Faces (High Speed Best Selection) With High Speed Best Selection, the camera automatically shoots a series of images, and selects the best one based on facial image blur, and facial expression (whether the subject is smiling or blinking). 1. Align the mode dial with [b] (BEST SHOT). 2. Press [SET]. 3. Use [8] and [2] to select 4. Select “High Speed Best Selection” and then press [SET]. 5. Press the shutter button to shoot. , and then press [SET].
Configuring the Camera to Help You Better Time Your Shots (Lag Correction) There always is some unavoidable time lag between the point you press the shutter button and the point that the image is actually recorded. The “Lag Correction” feature lets you configure the camera to lessen or even eliminate this lag to help you better time your shots and get exactly the moment you want. With “Lag Correction”, you half-press the shutter button and compose the image you want to shoot.
8. Use [4] and [6] to scroll through the pre-recorded images on the monitor screen. Use [4] and [6] to scroll through the pre-recorded images. Each image appears, along with an indication of the timing when it was pre-recorded. –0.4 sec. –0.3 sec. –0.2 sec. –0.1 sec. SHUTTER (0.4*) (0.3*) (0.2*) (0.1*) (Full-press) * Seconds prior to full-press of shutter button.
Using Continuous Shutter with Auto Focus (AF-CS) AF-CS shoots up to 30 CS images while keeping the subject in focus. This feature comes in handy when shooting children and other fast-moving subjects. The CS speed is automatically adjusted in accordance with shooting conditions within the range of three to six frames per second. 1. Align the mode dial with [b] (BEST SHOT). 2. Press [SET]. 3. Use [8] and [2] to select 4. Select “AF-CS” and then press [SET]. 5.
Shooting with High Speed Anti Shake (High Speed Anti Shake) When you press the shutter button while High Speed Anti Shake is enabled, the camera records multiple images and automatically combines them in a way that produces a final image with minimal blur. You can shoot with this feature to minimize the effects of camera movement when shooting with optical Anti Shake does not produce the desired results. 1. In the REC mode, set the mode dial to [b] (BEST SHOT). 2. Press [SET]. 3.
Shooting Snapshots (Snapshot) This function adjusts exposure and shoots whenever the shutter button is halfpressed. This helps to ensure that you don’t miss the shots you want. This feature comes in handy for daily shooting and when shooting natural scenery. 1. Align the mode dial with [b] (BEST SHOT). 2. Press [SET]. 3. Use [8] and [2] to select 4. Select “Snapshot” and then press [SET]. 5. Half-press the shutter button. , and then press [SET]. This will adjust exposure and shoot the snapshot.
Using a TV Screen to Shoot Snapshots (HDMI TV Output) Use the procedure below to configure the camera for shooting snapshots with an aspect ratio of 16:9, as you compose them on a TV screen. 1. Turn off the camera and use a commercially available HDMI cable to connect the camera to a TV. HDMI connector HDMI input HDMI output (Mini) HDMI cable (commercially available) HDMI mini connector 2. Turn on the camera. 3. Align the Mode Dial with [b] (BEST SHOT). 4. Press [SET]. 5.
NOTE • For details about connecting to the camera and precautions when connecting, see page 118. • If you want to change the digital video signal format, first unplug the HDMI cable from the camera (page 119). • The settings in the table below are fixed while shooting with this function.
Advanced Settings (REC MENU) The following are menu operations you can use to configure various camera settings. • You also can use the Control Panel (page 38) to configure some of the settings that appear on the menu screen. Refer to the page references provided in this section for information about configuring settings using the Control Panel. Configuring Recording Settings . Example Menu Screen Operation 1. In the REC mode, press [MENU].
. Menu Operations in This Manual Menu operations are represented in this manual as shown below. The following operation is the same as the one described under “Example Menu Screen Operation” on page 92. Press [4] and then use [8] and [2] to select the “r REC MENU” tab, and then press [SET]. Procedure Enter the REC Mode * [MENU] * “r REC MENU” Tab * Self-timer Press [MENU]. Use [8] and [2] to select “Self-timer” and then press [6].
Saving a Second Normal Image When Shooting With HDR Art (Double (HDR ART)) Procedure Enter the REC Mode * [MENU] * “r REC MENU” Tab * Double (HDR Art) See page 63 for details.
• You should regard the print paper sizes suggested here as guidelines only (200 dpi print resolution). • Available image sizes are limited for some functions as noted below. 16M This image size cannot be selected when using “High Speed Night Shot”. Selecting “16M” in another mode and then switching to “High Speed Night Shot” will cause the image size to change to “10M” automatically. 3:2, 16:9 These image sizes cannot be selected when using “High Speed CS” or “High Speed Night Shot”.
Specifying Snapshot Image Quality (Image Quality) Procedure Enter the REC Mode * [MENU] * “r REC MENU” Tab * Image Quality REC Screen Icon Description Display Setting Fine Gives image quality priority. Normal Normal • The “Fine” setting helps to bring out details when shooting a finely detailed image of nature that includes dense tree branches or leaves, or an image of a complex pattern.
Settings (Quality (pixels)) REC Screen Approximate Data Rate Description Icon Display (Frame Rate) STD 3.9 Megabits/second (30 frames/second) HS1000 40.0 Megabits/second (1000 frames/second) HS480 40.0 Megabits/second (480 frames/second) HS240 40.0 Megabits/second (240 frames/second) HS120 40.0 Megabits/second (120 frames/second) HS30-240 5.4 Megabits/second (30 frames/second) 40.4 Megabits/second (240 frames/second) HS30-120 10.4 Megabits/second (30 frames/second) 40.
Specifying the ISO Sensitivity Upper Limit (ISO High Limit) Procedure Enter the REC Mode * [MENU] * “r REC MENU” Tab * ISO High Limit Settings Auto REC Screen Icon Display None Description Shoots using the ISO sensitivity setting specified by the “ISO Sensitivity” setting (page 45). ISO 200 ISO 400 ISO 800 ISO 1600 The setting selected here becomes the ISO sensitivity upper limit when “Auto” is selected for the “ISO Sensitivity” setting (page 45).
Zooming with Super Resolution (Zoom (SR)) Procedure Enter the REC Mode * [MENU] * “r REC MENU” Tab * Zoom (SR) See page 54 for details. Specifying the Auto Focus Area (AF Area) Procedure Enter the REC Mode * [MENU] * “r REC MENU” Tab * AF Area You can use the following procedure to change the Auto Focus metering area for shooting snapshots. • When recording movies, the AF metering area is always “U Spot”.
• With some BEST SHOT scenes, there are restrictions on the use of AF area settings. Because of this, you may not be able to use certain settings or you may not be able to specify any AF Area setting. • While Face Detection (page 102) is turned on, regardless of the current AF Area setting, “U Spot” (center) focusing will be used automatically whenever a face cannot be detected for some reason.
NOTE • Only camera shake correction can be used during FHD and STD movie recording. • Anti Shake correction is not supported during High Speed Movie or HDR Art Movie recording. • When Anti Shake is enabled and “Auto” is selected for “ISO” (page 45), ISO sensitivity, aperture, and shutter speed will not appear on the monitor screen when you half-press the shutter button. These values will appear in the display of the image immediately after it is shot.
Shooting with Continuous Auto Focus (Continuous AF) Procedure Enter the REC Mode * [MENU] * “r REC MENU” Tab * Continuous AF When shooting a snapshot while “On” is selected for Continuous AF, Auto Focus is performed and focusing is continually updated until you half-press the shutter button. • Before you half-press the shutter button, the camera focuses at the center of the screen.
IMPORTANT! • Face detection cannot be used in combination with any of the following features. – Some BEST SHOT scenes – Movie Mode (Including some BEST SHOT scenes that support High Speed Movie recording) – High Speed CS with Prerecord CS (Including some BEST SHOT scenes that support High Speed CS recording) • The “Focus” setting is always fixed at “AF” (Auto Focus) whenever “Face Detection” is being used. If you want to change the “Focus” setting, first select “Off” for “Face Detection”.
Correcting Image Brightness (EV Shift) Procedure Enter the REC Mode * [MENU] * “r REC MENU” Tab * EV Shift For details, see the Control Panel procedure on page 47. Adjusting White Balance (White Balance) Procedure Enter the REC Mode * [MENU] * “r REC MENU” Tab * White Balance For details, see the Control Panel procedure on page 40. Selecting a Focus Mode (Focus) Procedure Enter the REC Mode * [MENU] * “r REC MENU” Tab * Focus For details, see the Control Panel procedure on page 42.
Specifying Flash Intensity (Flash Intensity) Procedure Enter the REC Mode * [MENU] * “r REC MENU” Tab * Flash Intensity You can specify flash intensity to one of five levels from +2 (brightest flash) to –2 (least bright flash). • Flash intensity may not change when the subject is too far away or too close. Controlling Image Sharpness (Sharpness) Procedure Enter the REC Mode * [MENU] * “r REC MENU” Tab * Sharpness You can specify one of five sharpness settings from +2 (sharpest) to –2 (least sharp).
Using the Auto Focus Assist Light (AF Assist Light) Procedure Enter the REC Mode * [MENU] * “r REC MENU” Tab * AF Assist Light Half-pressing the shutter button while this setting is selected causes the front lamp to light, which provides illumination for focusing in areas where lighting is dim. Leaving this function turned off is recommended when shooting portraits from short distances, etc. Front lamp IMPORTANT! • Never look directly into the front lamp while it is lit.
Turning on Image Review (Review) Procedure Enter the REC Mode * [MENU] * “r REC MENU” Tab * Review While Review is turned on, the camera will display an image for about one second immediately after it is recorded. Type 1 Displays a full-screen view of the image. Type 2, Type 3 Displays a partial-screen view of the image. The difference between Type 2 and Type 3 is the way the image appears on the display.
Configuring Power On Default Settings (Memory) Procedure Enter the REC Mode * [MENU] * “r REC MENU” Tab * Memory This setting lets you specify which camera settings should be remembered by the camera when it is turned off, and restored the next time the camera is turned on. To have the camera remember a setting, you should enable the setting’s memory. Any setting whose memory is disabled will be reset to its initial default any time the camera is turned off.
Viewing Snapshots and Movies Viewing Snapshots See page 32 for the procedure for viewing snapshots. Viewing a Movie 1. Press [p] (PLAY) and then use [4] and [6] to display the movie you want to view. 2. Press [SET] to start playback. Movie icon: » Recording time Image quality Movie Playback Controls Fast forward/fast reverse [4] [6] (Playback in progress.) • Each press of either button increases the speed of the fast forward or fast reverse operation. • To return to normal playback speed, press [2].
• A movie that has been rotated using “Rotation” (page 129) or “Auto Rotate” (page 158) cannot be zoomed. Viewing a Panorama Image 1. Press [p] (PLAY), and then use [4] and [6] to display the panorama images you want to view. 2. Press [SET] to start playback of the panorama. Panorama playback causes the image to scroll left, right, up, or down. Playback Controls To start or pause playback [SET] To advance scroll while paused [4] [6] (When the slide direction is left or right.
Viewing Continuous Shutter Images Each time you perform a continuous shutter (CS) operation, the camera creates a CS group that includes all of the images for that particular CS session. You can use the following procedure to play back the images in a particular CS group. 1. Press [p] (PLAY) and then use [4] and [6] to display the CS group whose images you want to view. Number of image files in the CS group CS group icon First image in the CS group 2.
The following are operations that are supported after you press [SET] to start image playback. [4] [6] During playback, changes the playback direction and playback speed. While playback is paused, scrolls forward or back. • Playback speed cannot be adjusted while the displayed image is zoomed. [SET] Toggles between pause and play. Zoom controller Zooms the image. • You can use [8], [2], [4], and [6] to scroll the zoomed image on the monitor screen.
. Deleting Multiple Files in a CS Group 1. While CS image playback is in progress or paused (toggle by pressing [SET]), press [2]. This will display the “CS Frame Edit” menu. 2. Use [8] and [2] to select “Delete” and then press [SET]. 3. Use [8] and [2] to select “Delete Frames” and then press [SET]. This displays a file selection screen. 4. Use [8], [2], [4], and [6] to move the selection boundary to the file you want to delete, and then press [SET].
Dividing Up a CS Group Use the following to divide up a CS Group into individual images. . Dividing Up a Specific CS Group 1. In the PLAY mode, press [MENU]. 2. Press [4], use [8] and [2] to select the “p PLAY MENU” tab, and then press [SET]. 3. Use [8] and [2] to select “Divide Group” and then press [6]. 4. Use [8] and [2] to select “Select File”, and then press [SET]. 5. Use [4] and [6] to display the CS group you want to divide up. 6. Use [8] and [2] to select “Divide” and then press [SET].
Copying a CS Group Image Use the following procedure to copy an image in a CS group to a location outside of the group. 1. While CS image playback is in progress or paused (toggle by pressing [SET]), press [2]. This will display the “CS Frame Edit” menu. 2. Use [8] and [2] to select “Copy”, and then press [SET]. 3. Use [4] and [6] to display the image you want to copy. 4. Use [8] and [2] to select “Copy”, and then press [SET].
Zooming an On-screen Image 1. In the PLAY mode, use [4] and [6] to scroll through the images until the one you want is displayed. 2. Rotate the zoom controller towards z ([) to zoom. Zoom factor Image area You can use [8], [2], [4], and [6] to scroll the zoomed image on the monitor screen. Rotate the zoom controller towards w to unzoom the image. – When monitor screen contents are turned on, a graphic in the lower right corner of the screen shows what part of the zoomed image is currently displayed.
Viewing Snapshots and Movies on a TV Screen 1. Use the optionally available AV cable (EMC-8A) to connect the camera to the TV. • For details about connecting to the camera and precautions when connecting, see page 17. AV cable (EMC-8A) Yellow White Red Video Audio TV AUDIO IN jack (red) AUDIO IN jack (white) VIDEO IN jack (yellow) • Make sure that the camera is turned off before plugging in or unplugging the cable.
NOTE • Audio is stereo. • Some TVs may not be able to output images and/or audio correctly. • All icons and indicators that appear on the monitor screen also appear on the TV screen. You can use [8] (DISP) to change the display contents. • Normally connecting the camera to a TV during recording will cause the camera’s monitor screen to go blank and display the image picked up by the camera on the TV screen.
NOTE • Use a HDMI cable that with a plug that is compatible with the camera’s HDMI mini connector on one end, and a plug that is compatible with your TV’s HDMI connector on the other end. • Proper image and/or audio output and other operations may not be possible with some devices. • Connecting the camera to the HDMI connector of another device can damage both the camera and the other device. Never connect two HDMI output connectors to each other.
IMPORTANT! • The “HDMI Output” setting cannot be changed as long as there is an HDMI cable connection between the camera and a TV. Disconnect the HDMI cable from the camera to change the “HDMI Output” setting. Recording Camera Images to a DVD Recorder or Video Deck Use the following method to connect the camera to the recording device using the AV cable (option). – DVD recorder or video deck: Connect the AV cable to the VIDEO IN and AUDIO IN terminals. – Camera: Connect the AV cable to the USB/AV port.
Other Playback Functions (PLAY MENU) This section explains menu items that you can use to configure settings and perform other playback operations. For information about menu operations, see page 92.
Effect Select the effect you want. Pattern 1 to 5: Plays background music and applies an image change effect. • Patterns 2 through 4 have different background music, but they all use the same image change effect. • Pattern 5 can be used for playback of snapshots only (except for those that are part of a CS group), and the “Interval” setting is ignored. • The currently selected image change effect setting is disabled automatically in following cases.
2. Perform one of the following operations to open the memory card or built-in memory. This will cause the camera to be recognized by your computer as a Removable Disk (Drive). • Windows 1Windows 8: Desktop * Explorer Windows 7, Windows Vista: Start * Computer Windows XP: Start * My Computer 2Double-click “Removable Disk”. • Macintosh 1Double-click the camera’s drive icon. 3. Create a folder named “SSBGM”. 4. Double-click the “SSBGM” folder you created and copy the background music file to it.
Editing a Movie on the Camera (Movie Editing) Procedure [p] (PLAY) * Movie Screen of Movie to be Edited * [MENU] * “p PLAY MENU” Tab * Movie Editing The Movie Editing feature lets you use one of the following procedures to edit out a specific part of a movie. Previous Cut Cuts everything from the beginning of the movie up to the current location. Intermediate Cut Cuts everything between two points. Next Cut Cuts everything from the current location to the end of the movie. 1.
4. Use [8] and [2] to select “Yes” and then press [SET]. The selected cut operation will take considerable time to complete. Don’t try to perform any camera operation until the “Busy... Please wait...” message disappears from the monitor screen. Note that a cut operation can take a long time if the movie being edited is long. IMPORTANT! • When you edit a movie, only the result is saved. The original movie is not retained. An editing operation cannot be undone.
Adjusting White Balance (White Balance) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * “p PLAY MENU” Tab * White Balance You can use the white balance setting to select a light source type for a recorded image, which will affect the colors of the image. ¤ Daylight Outdoors, fair weather ' Overcast Outdoors, cloudy to rain, in tree shade, etc. “ Shade Very high temperature light, such as building shade, etc.
Selecting Images for Printing (DPOF Printing) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * “p PLAY MENU” Tab * DPOF Printing See page 135 for details. Protecting a File Against Deletion (Protect) Procedure [p] (PLAY) * [MENU] * “p PLAY MENU” Tab * Protect Protects specific files. 1 Use [4] and [6] to select the image that you want to protect. • To view a particular image, rotate the zoom controller. Select File 2 Press [SET]. An image that is protected is indicated by the › icon.
. To protect a specific image in a CS group 1. While CS image playback is in progress or paused (toggle by pressing [SET]), press [2]. This will display the “CS Frame Edit” menu. 2. Use [8] and [2] to select “Protect” and then press [SET]. 3. Use [8] and [2] to select “Select Frames”, and then press [SET]. 4. Use [4] and [6] to select the image that you want to protect, and then press [SET]. This will protect the image and display the › icon. • To view a particular image, rotate the zoom controller.
Editing the Date and Time of an Image (Date/Time) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * “p PLAY MENU” Tab * Date/Time [8] [2] Changes the setting at the cursor location. [4] [6] Moves the cursor between settings. When the date and time settings are what you want, align the cursor with “Apply” and then press [SET] to apply them.
Resizing a Snapshot (Resize) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * “p PLAY MENU” Tab * Resize You can reduce the size of a snapshot and save the result as a separate snapshot. The original snapshot is also retained. You can resize an image to one of three sizes: 10M, 3M, VGA. • Resizing a 3:2 or 16:9 size snapshot will create an image with an aspect ratio of 4:3, with both sides cut off.
Copying Files (Copy) Procedure [p] (PLAY) * Snapshot or Movie Screen * [MENU] * “p PLAY MENU” Tab * Copy Files can be copied from the camera’s built-in memory to a memory card or from a memory card to built-in memory. Built-in* Card Copies all files from built-in camera memory to a memory card. This option copies all the files in built-in camera memory. It cannot be used to copy a single file. Card* Built-in Copies a single file on the memory card to camera built-in camera memory.
Combining CS Images into a Single Still Image (CS Multi Print) Procedure [p] (PLAY) * Display CS group. * [MENU] * “p PLAY MENU” Tab * CS Multi Print 1. Use [8] and [2] to select “Create”. • You can use [4] and [6] to select a different CS group, if you want. 2. Press [SET]. This converts the CS group to a 16M (4608x3456) image with up to 30 CS frames (5 vertical x 6 horizontal). • This camera may not be able to correctly convert a CS group image with another camera.
Printing Printing Snapshots Professional Print Service* You can take a memory card that contains the images you want to print to a professional print service and have them printed. Printing on a Home Printer* Printing Images on a Printer with Memory Card Slot You can use a printer equipped with a memory card slot to print images directly from a memory card. For details, see the user documentation that comes with your printer.
. Connecting the Camera to a Printer Use the USB cable that comes bundled with the camera to connect the camera to your printer’s USB port. • For details about connecting to the camera and precautions when connecting, see page 17. USB port USB Small connector Large connector USB cable (included with camera) • The camera does not draw power over the USB cable. Check the battery level before connecting and make sure it is not too low.
5. Use [8] and [2] to specify the print option you want. 1 Image : Prints one image. Select and then press [SET]. Next, use [4] and [6] to select the image you want to print. DPOF Printing: Prints multiple images. Select and then press [SET]. With this option, images will be printed in accordance with DPOF settings (page 135). • To toggle date stamping on and off, press [0] (Movie). The date stamp will be printed when “On” is indicated on the monitor screen. 6.
. Configuring DPOF Settings Individually for Each Image Procedure [p] (PLAY) * Snapshot Screen * [MENU] * “p PLAY MENU” Tab * DPOF Printing * Select images 1. Use [4] and [6] to scroll through the files until the image you want to print is displayed. 2. Use [8] and [2] to specify the number of copies. You can specify a value up to 99. Specify 00 if you do not want to print the image. • If you want to include the date in the images, press [0] (Movie) so “On” is shown for date stamping.
. To specify the number of copies for a specific image in a CS group 1. While CS image playback is in progress or paused (toggle by pressing [SET]), press [2]. This will display the “CS Frame Edit” menu. 2. Use [8] and [2] to select “DPOF Printing” and then press [SET]. 3. Use [8] and [2] to select “Select Frames” and then press [SET]. 4. Use [4] and [6] to scroll through images until one you want to print is displayed. 5. Use [8] and [2] to specify the number of copies.
DPOF settings are not cleared automatically after printing is complete. The next DPOF print operation you execute will be performed using the last DPOF settings you configured for the images. To clear DPOF settings, specify “00” for the number of copies of all images. Tell your print service about your DPOF settings! If you take a memory card to a professional print service, be sure to tell them that it includes DPOF settings for the images to be printed and the number of copies.
. Standards Supported by the Camera • PictBridge This is a standard of the Camera and Imaging Products Association (CIPA). You can connect the camera directly to a printer that supports PictBridge, and perform image selection and printing using the camera monitor screen and controls.
Using the Camera with a Computer Things you can do using a computer... You can perform the operations described below while the camera is connected to a computer. Save images to a computer and view them there • Save images and view them manually (USB connection) (pages 141, 145). • Transfer images to a computer automatically over a wireless LAN for viewing (Eye-Fi) (page 148). Play back and edit movies • You can play back movies (pages 144, 147).
Using the Camera with a Windows Computer When you want Operating System to do this: Version Save images to a computer and view them there manually See page: Install this software: Windows 8, Windows 7, Installation not required. Windows Vista, Windows XP (SP3) Windows 8, Windows 7 Play movies Installation not required. • Windows Media Player 12, which is already installed on most computers, can be used for playback. 141 144 Movies can be played back using Windows Vista, QuickTime 7.
. To connect the camera to your computer and save files 1. Turn on the camera and press [MENU]. 2. On the “¥ SETTING” tab, select “USB” and then press [6]. 3. Use [8] and [2] to select “Mass Storage”, and then press [SET]. 4. Turn off the camera and then use the USB cable that comes with the camera to connect it to your computer. USB port USB • For details about connecting to the camera and precautions when connecting, see page 18. USB cable 5. Turn on the camera.
11. Windows 8 users: On the “Documents” menus, click “Home” and then “Paste”. Windows 7 users: On the “Documents” “Organize” menu, select “Paste”. Windows Vista users: On the “Documents” “Edit” menu, select “Paste”. Windows XP users: On the “My Documents” “Edit” menu, select “Paste”. This will paste the “DCIM” folder (and all the image files it contains) into your “Documents” (Windows 8, Windows 7, Windows Vista) or “My Documents” (Windows XP) folder.
Playing Movies To play back a movie, first copy it to your computer and then double-click the movie file. Some operating systems may not be able to play back movies. If this happens, you need to install separately available software. • With Windows 8 and Windows 7, playback is supported by Windows Media Player 12. • If you are unable to play back movies, go to the URL below to download QuickTime 7 and install it on your computer. http://www.apple.com/quicktime/ .
Using the Camera with a Macintosh When you want to do this: Operating System Version Install this software: Save images to your Macintosh and view them there manually OS X Installation not required. Save images to your Macintosh automatically/ Manage images OS X Use iPhoto, which comes bundled with some Macintosh products. Play movies OS X Movie file playback is supported under OS X 10.4.11 or higher when QuickTime 7 or higher is installed.
. To connect the camera to your computer and save files 1. Turn on the camera and press [MENU]. 2. On the “¥ SETTING” tab, select “USB” and then press [6]. 3. Use [8] and [2] to select “Mass Storage”, and then press [SET]. 4. Turn off the camera and then use the USB cable that comes with the camera to connect it to your Macintosh. USB port USB • For details about connecting to the camera and precautions when connecting, see page 18. USB cable 5. Turn on the camera.
. To view copied images 1. Double-click the camera’s drive icon. 2. Double-click the “DCIM” folder to open it. 3. Double-click the folder that contains the images you want to view. 4. Double-click the image file you want to view. • For information about file names, see “Memory Folder Structure” on page 153. • An image that was rotated on the camera will be displayed on your Macintosh screen in its original (unrotated) orientation.
. Movie Playback Precautions Proper movie playback may not be possible on some Macintosh models. If you experience problems, try the following. – Try recording movies with a quality setting of “STD”. – Upgrade to the latest version of QuickTime. – Shut down other applications that are running. Even if proper playback is not possible on your Macintosh, you can use the AV cable (option) to connect to the video input terminal of a TV or Macintosh and play back movies that way.
IMPORTANT! • Recorded images are transferred over wireless LAN. Do not use the Eye-Fi card or turn off Eye-Fi card communication (page 156) when on an aircraft or in any other location where use of wireless communication is limited or prohibited. • Loading an Eye-Fi card will cause the Eye-Fi indicator to appear on the monitor screen. Its transparent or not transparent appearance indicates the communication status as shown below.
Using a Smartphone to Play Back Images Stored on a FlashAir Card (FlashAir) Loading a commercially available FlashAir card in the camera makes it possible to view images on and copy them to a smartphone or computer over a wireless LAN connection. • For more information, see the instructions that come with the card. 1. Use a computer or other device to configure the settings of the FlashAir card.
IMPORTANT! • When on an aircraft or in any other location where use of wireless communication is limited or prohibited, do not use a FlashAir card, or change the camera’s “FlashAir” setting (page 156) and the FlashAir card’s setting to those shown below. FlashAir: Off Memory Card: Start with the control image • Loading a FlashAir card into the camera will cause the FlashAir icon to appear on the monitor screen.
Files and Folders The camera creates a file each time you shoot a snapshot, record a movie, or perform any other operation that stores data. Files are grouped by storing them in folders. Each file and folder has its own unique name. • For details about how folders are organized in memory, see “Memory Folder Structure” (page 153). Name and Maximum Number Allowed Example Each folder can contain up to 9999 files named CIMG0001 through CIMG9999. The extension on the file name depends on the file type.
Memory Card Data The camera stores images you shoot in accordance with the Design Rule for Camera File System (DCF). . About DCF The following operations are supported for DCF-compliant images. Note, however, that CASIO makes no performance guarantees concerning these operations. • Transferring this camera’s DCF-compliant images to another manufacturer’s camera and view them. • Printing this camera’s DCF-compliant images on another manufacturer’s printer.
. Supported Image Files • Image files shot with this camera • DCF-compliant image files This camera may not be able to display an image, even if it is DCF-compliant. When displaying an image recorded on another camera, it may take a long time for the image to appear on this camera’s monitor screen. . Built-in Memory and Memory Card Data Handling Precautions • Whenever copying memory contents to your computer, you should copy the DCIM folder and all of its contents.
Other Settings (SETTING) This section explains menu items that you can use to configure settings and perform other operations in both the REC mode and PLAY mode. For information about menu operations, see page 92.
Turning off Eye-Fi Card Communication (Eye-Fi) Procedure [MENU] * “¥ SETTING” Tab * Eye-Fi Select “Off” to disable Eye-Fi card communication (page 148). Configuring FlashAir Card Communication Settings (FlashAir) Procedure [MENU] * “¥ SETTING” Tab * FlashAir Selecting “Start with the control image” for the FlashAir card setting and selecting “On” for the camera’s “FlashAir” setting will establish a FlashAir wireless LAN connection (page 150).
Creating an Image Storage Folder (Create Folder) Procedure [MENU] * “¥ SETTING” Tab * Create Folder Create Folder Creates a folder with a unique number (page 152). Files will be stored in the new folder starting from when you record your next image. Cancel Cancels folder creation. • Images recorded with the BEST SHOT “For eBay” or “Auction” scene, and the “For YouTube” scene are stored in special folders. They are not stored in the folder you create here.
Auto Image Orientation Detection and Rotation (Auto Rotate) Procedure [MENU] * “¥ SETTING” Tab * Auto Rotate On Automatically rotates snapshots shot with the camera held vertically 90 degrees. Off Images not rotated automatically. The camera automatically detects whether a snapshot image was shot in portrait or landscape orientation and displays it accordingly. Specifying the File Name Serial Number Generation Rule (File No.) Procedure [MENU] * “¥ SETTING” Tab * File No.
Configuring Sleep State Settings (Sleep) Procedure [MENU] * “¥ SETTING” Tab * Sleep This feature turns off the monitor screen and lights the back lamp (green) whenever no camera operation is performed for a preset period of time. Press any button to turn the monitor screen back on. Trigger Time Settings: 30 sec, 1 min, 2 min, Off (Sleep is disabled while “Off” is selected.) • Sleep is disabled under any of the following conditions.
Configuring [r] Setting (REC) Procedure [MENU] * “¥ SETTING” Tab * REC Power On Camera turns on whenever [r] (REC) is pressed. On/Off Camera turns on or off whenever [r] (REC) is pressed. Off Camera does not turn on or off when [r] (REC) is pressed. • With “On/Off”, the camera turns off when you press [r] (REC) in the REC mode. Configuring [p] Setting (PLAY) Procedure [MENU] * “¥ SETTING” Tab * PLAY Power On Camera turns on whenever [p] (PLAY) is pressed.
Configuring World Time Settings (World Time) Procedure [MENU] * “¥ SETTING” Tab * World Time You can use the World Time screen to view the current time in a zone that is different from your Home City when you go on a trip, etc. World Time displays the current time in 162 cities in 32 time zones around the globe. 1. Use [8] and [2] to select “Destination” and then press [6]. • To change the geographic area and city for the time where you normally use the camera, select “Home”. 2.
Setting the Camera’s Clock (Adjust) Procedure [MENU] * “¥ SETTING” Tab * Adjust When the date and time settings are what you want, select “Apply” and then press [SET] to apply them. [8] [2] Change the setting at the cursor location [4] [6] Move the cursor between settings • To switch between 12-hour and 24-hour timekeeping, use move the cursor to “am (pm)” and “24h” (one of which will be displayed) and then use [8] and [2] to change the setting. • You can specify a date from 2001 to 2049.
Specifying the Display Language (Language) Procedure [MENU] * “¥ SETTING” Tab * Language . Specify the display language you want. 1 Select the bottom tab “¥”. 2 Select “Language”. 3 Select the language you want. 1 23 • Camera models sold in certain geographic areas may not support display language selection.
Selecting the Screen Aspect Ratio and Video Output System (Video Out) Procedure [MENU] * “¥ SETTING” Tab * Video Output You can use the procedure in this section to select either NTSC or PAL as the video output system. You can also specify an aspect ratio of 4:3 or 16:9. NTSC Video system used in Japan, the U.S.
Formatting Built-in Memory or a Memory Card (Format) Procedure [MENU] * “¥ SETTING” Tab * Format If a memory card is loaded in the camera, this operation will format the memory card. It will format built-in memory if no memory card is loaded. • The format operation will delete all contents on the memory card or in built-in memory. It cannot be undone. Make sure you do not need any data currently on the card or in built-in memory before you format it.
Appendix Safety Precautions *DANGER This symbol indicates information that, if ignored or applied incorrectly, creates the danger of death or serious personal injury. *WARNING This indication stipulates matters that have the risk of causing death or serious injury if the product is operated incorrectly while ignoring this indication.
*DANGER • Failure to observe any of the following precautions creates the risk of battery overheating, fire, and explosion. – Never use or leave the battery near open flame. – Do not expose the battery to heat or fire. – Make sure the battery is oriented correctly when charging it. – Never carry or store the battery together with items that can conduct electricity (necklaces, pencil lead, etc.).
*WARNING . Smoke, abnormal odor, overheating, and other abnormalities $ • Continued use of the camera while it is emitting smoke or strange odor, or while it is overheating creates the risk of fire and electric shock. Immediately perform the following steps whenever any of the above symptoms are present. 1. Turn off the camera. 2. If you are using the USB-AC adapter to power the camera, unplug the power cord plug from the power outlet.
*WARNING • Misuse of the USB-AC adapter can cause them to become damaged, creating the risk of fire and electric shock. Be sure to observe the following precautions. – Never place heavy objects on the USB-AC adapter or subject it to direct heat. – Do not modify the USB-AC adapter, allow it to become damaged, or forcibly bend it. – Do not twist or pull on the USB-AC adapter cord. – When in use, locate the cord where it will not be tripped over. • Never touch the power plug while your hands are wet.
*WARNING . Dropping and Rough Treatment - • Continued use of the camera after it is damaged by dropping or other rough treatment creates the risk of fire and electric shock. Immediately perform the following steps whenever any of the above symptoms are present. 1. Turn off the camera. 2. If you are using the USB-AC adapter to power the camera, unplug the power plug from the wall outlet. Also, remove the battery from the camera, taking care to protect yourself against burn injury. 3.
*CAUTION . Rechargeable Battery • If battery charging does not end normally within the specified charging time, stop charging anyway and contact your local CASIO authorized service center. Continued charging creates the risk of battery overheating, fire, and explosion. • Be sure to read the user documentation that comes with the camera and special charger unit before using or charging the battery. • Store batteries in a location that cannot be reached by infants and young children.
*CAUTION . Monitor Screen • Do not apply strong pressure to the LCD panel surface or subject it to strong impact. Doing so can cause the display panel glass to crack and lead to personal injury. • Should the monitor screen ever become cracked, never touch any of the liquid inside the monitor screen. Doing so creates the risk of skin inflammation. • Should monitor screen liquid ever get into your mouth, immediately rinse your mouth out and contact your physician.
Precautions During Use . Data Error Precautions Your digital camera is manufactured using precision digital components. Any of the following creates the risk of corruption of data in camera memory.
. Lens • Never apply too much force when cleaning the surface of the lens. Doing so can scratch the lens surface and cause malfunction. • You may sometimes notice some distortion in certain types of images, such as a slight bend in lines that should be straight. This is due to the characteristics of lenses, and does not indicate malfunction of the camera. . Caring for your camera • Never touch the lens or flash window with your fingers.
. Copyrights Except for your own personal enjoyment, unauthorized use of snapshots or movies of images whose rights belong to others, without the permission of the right holder, is forbidden by copyright laws. In some cases, shooting of public performances, shows, exhibitions, etc. may be restricted entirely, even if it is for your own personal enjoyment.
Power Supply Charging . If the camera’s back lamp starts flashing red... If the back lamp starts flashing red during charging, it means that further charging is not possible for one of the reasons below. Perform the actions described below to correct the problem and then try charging again.
Battery Precautions . Precautions during Use • Operation provided by a battery under cold conditions is always less than operation under normal temperatures. This is due to the characteristics of the battery, not the camera. • Charge the battery in an area where the temperature is within the range of 10°C to 35°C (50°F to 95°F). Outside this temperature range charging can take longer than normal or even fail. • Do not tear or remove the battery outer label.
Using a Memory Card See page 23 for information about supported memory cards and how to load a memory card. . Using a Memory Card • SD memory cards, SDHC memory cards, and SDXC memory cards have a write protect switch. Use the Write enabled switch when you need to guard against accidentally deleting data. Note, however, if you write protect an SD memory card you must then turn write protection Write disabled off whenever you want to record to it, format it, or delete any of its images.
. Discarding or Transferring Ownership of a Memory Card or the Camera The format and delete functions of the camera do not actually delete files from the memory card. The original data remains on the card. Note that responsibility for the data on a memory card lies with you. The following procedures are recommended whenever you discard a memory card or the camera, or if you transfer ownership to another party.
Reset Initial Default Settings The tables in this section show the initial default settings that are configured for menu items (displayed when you press [MENU]) after you reset the camera (page 165). Menu items depend on whether the camera is in the REC mode or PLAY mode. • A dash (–) indicates an item whose setting is not reset or an item for which there is no reset setting. IMPORTANT! • Depending on the recording mode, some of the items on the menu that appears may not be usable. .
. p PLAY MENU Images: All images / Time: 30 min / Interval: 3 sec / Effect: Pattern 1 Protect – Date/Time – Rotation – Resize – MOTION PRINT Create Trimming – Movie Editing – Copy – Lighting – Divide Group – White Balance – CS Multi Print – Brightness – CS Frame Edit – DPOF Printing – Slideshow .
Using the On-screen Histogram to Check Exposure (+Histogram) Displays a histogram on the monitor screen which you can use to check the exposure of an image before you shoot it. You also can display the histogram in the PLAY mode for information about the exposure levels of images. Histogram NOTE • A centered histogram does not necessarily guarantee optimum exposure. The recorded image may be over-exposed or under-exposed, even though its histogram is centered.
Example Histograms A histogram towards the left side results when the overall image is dark. A histogram that is too far to the left may result in “black out” of the dark areas of an image. A histogram towards the right side results when the overall image is light. A histogram that is too far to the right may result in “white out” of the light areas of an image. An overall well-balanced histogram results when the overall image is at optimal lightness.
When things don’t go right... Troubleshooting Problem Possible Cause and Recommended Action Power Supply Power does not turn on. 1)The battery may not be loaded correctly (page 16). 2)The battery may be dead. Charge the battery (page 17). If the battery goes dead soon after being charged, it means the battery has reached the end of its life and needs to be replaced. Purchase a separately available CASIO NP-130 rechargeable lithium ion battery. The camera suddenly powers down.
Problem Possible Cause and Recommended Action The subject is out of focus in the recorded image. The image may not be focused properly. When composing the image, make sure the subject is located inside the focus frame. The flash does not fire. 1)If ? (Flash Off) is selected as the flash mode, change to another mode (page 48). 2)If the battery is low, charge it (page 17).
Problem Possible Cause and Recommended Action A recorded image was not saved. 1)Camera power may have been turned off before the save operation was complete, which will result in the image not being saved. If the battery indicator shows , charge the battery as soon as possible (page 21). 2)You may have removed the memory card from the camera before the save operation was complete, which will result in the image not being saved. Do not remove the memory card before the save operation is complete.
Problem Possible Cause and Recommended Action Playback The color of the playback image is different from what appears on the monitor screen when shooting. Sunlight or light from another source may be shining directly into the lens when you are shooting. Position the camera so sunlight does not shine directly into the lens. Images are not displayed. This camera cannot display non-DCF images recorded onto a memory card using another digital camera.
Problem Possible Cause and Recommended Action Language selection 1)You did not configure initial settings after purchasing the screen appears camera or the camera may have been left with a dead when the camera is battery. Configure the correct settings (pages 22, 163). turned on. 2)There may be a problem with the camera’s memory data. If this is the case, perform the reset operation to initialize the camera’s setup (page 165). After that, configure each setting.
Display Messages ALERT The camera’s protection function may have activated because camera temperature is too high. Turn off the camera and wait until it cools down before trying to use it again. Battery is low. Battery power is low. Can not find the file. The image you specified with the slideshow “Images” setting cannot be found. Change the “Images” setting (page 121) and try again. There is something wrong with the memory card.
Memory Full Memory is full with images you recorded and/or files saved by editing operations. When shooting with Prerecord CS, this message indicates that there is not enough memory capacity to record all of the pre-recorded images. Delete files you no longer need (page 33). Printing Error An error occurred while printing. • The printer is turned off. • The printer generated an error, etc. Record Error Image compression could not be performed for some reason during image data recording.
Number of Snapshots/Movie Recording Time Snapshot Image Size (Pixels) 16M (4608x3456) 3:2 (4608x3072) 16:9 (4608x2592) 10M (3648x2736) 5M (2560x1920) 3M (2048x1536) VGA (640x480) Quality File Size Built-in Memory*1 Recording Capacity SD Memory Card*2 Recording Capacity Fine 10.71 MB 3 1072 Normal 5.57 MB 5 1654 Fine 9.43 MB 4 1214 Normal 4.92 MB 6 1873 Fine 7.83 MB 5 1466 Normal 4.1 MB 7 2221 Fine 6.4 MB 6 1787 Normal 3.38 MB 9 2728 Fine 2.99 MB 10 2990 Normal 1.
Movies Built-in Memory*1 Recording Capacity Maximum Recording Time with SD Memory Card*2 File Size of 1-minute Movie Continuous Recording Time per Movie*3 FHD 14.2 Megabits/second (1920x1080) (30 frames/second) (Stereo) 27 seconds 2 hours 13 minutes 106.5 MB 29 minutes HD 10.9 Megabits/second (1280x720) (15, 20, 30 frames/ 5 (Stereo) * second) 35 seconds 2 hours 53 minutes 81.8 MB 29 minutes STD (640x480) (Stereo) 3.
Image Quality (Pixels) / (Audio) Approximate Data Rate (Frame Rate) Maximum File Size Built-in Memory*1 Recording Capacity Maximum Recording Time with SD Memory Card*2 Continuous Recording Time per Movie*3 YouTube (FHD) (1920x1080) (Stereo) 14.2 Megabits/second (30 frames/second) 27 seconds 2 hours 13 minutes 15 minutes YouTube (STD) (640x480) (Stereo) 3.9 Megabits/second (30 frames/second) 1 minute 41 seconds 8 hours 12 minutes 15 minutes YouTube (HS1000) (224x64) (No audio) 40.
• Snapshot and movie recording capacity values are approximate and intended for reference only. Actual capacity depends on image contents. • File size and data rate values are approximate and intended for reference only. Actual values depend on the type of image being shot. • When using a memory card with a different capacity, calculate the number of images as a percentage of 16GB. • The time it takes to play back a high speed movie will be different from the time it takes to record it.
Specifications File Format Snapshots: JPEG (Exif Version 2.3; DCF 2.0 standard; DPOF compliant) Movies: MOV format, H.264/AVC standard, IMA-ADPCM (stereo) Recording Media Built-in Memory (Image Storage Area: 52.
Shutter CMOS electronic shutter, mechanical shutter Shutter Speed Snapshot (Program Auto): 1/4 to 1/2000 second Snapshot (Premium Auto PRO): 4 to 1/4000 second Snapshot (Aperture Priority AE): 1 to 1/2000 second Snapshot (Shutter Speed Priority AE): 15 to 1/2000 second Snapshot (Manual Exposure): 15 to 1/2000 second • 1/25000-second shutter speed is possible only with High speed Continuous Shutter, shutter speed priority AE or manual exposure. • May differ due to the camera setup. Aperture Value F3.
Approximate Battery Life All of the values provided below represent the approximate amount of time under normal temperature (23°C (73°F)) before the camera turns off. These values are not guaranteed. Low temperatures shorten battery life.
. Rechargeable lithium ion battery (NP-130) Rated Voltage 3.7 V Rated Capacitance 1800 mAh Operating Temperature Requirements 0 to 40°C (32 to 104°F) Dimensions 37.8 (W) x 44.8 (H) x 11.2 (D) mm (1.49" (W) x 1.76" (H) x 0.44" (D)) (excluding projections) Weight Approximately 38 g (1.3 oz) . USB-AC adaptor (AD-C53U) Input Power 100 to 240 V AC, 50/60 Hz, 100 mA Output Power 5.0 V DC, 650 mA Operating Temperature Requirements 5 to 35°C (41 to 95°F) Dimensions 53 (W) x 21 (H) x 45 (D) mm (2.
CASIO COMPUTER CO., LTD.