Operation Manual

150
Connecting the Camera with a Smartphone
(Wireless Connection)
This function lets you remotely shoot a snapshot or movie with the camera using a
smartphone. You also can perform remote zoom, self-timer, and other operations as
well.
1. Press [W] (Wireless).
2. Use [8], [2], [4], and [6] to select “Shoot with phone”, and then
press [SET].
3. Use [8] and [2] to select “Remote Start”, and then press [SET].
For information about how to use “Shoot with phone”, refer to the EXILIM
Connect manual (page 145).
You can select one more snapshot and/or movie file in camera memory and send it to
a smartphone. You can select up to 100 files, totaling no more than 500MB for a
single send. After sending an image to a smartphone, you can then upload it to a
social networking service.
1. Press [W] (Wireless).
2. Use [8], [2], [4], and [6] to select “Send to phone”, and then press
[SET].
3. Use [8] and [2] to select “Send Selected Image”, and then press
[SET].
4. Use [8], [2], [4], or [6] to move the blue boundary to the image you
want to send to the smartphone, and then press [SET].
Selecting the image of a file causes its check box to become selected.
• You can enlarge the selected image by rotating the zoom controller towards
z ([).
5. After selecting the images of all of the files you want to send to the
smartphone, press [MENU].
For information about how to use “Send Selected Image”, refer to the EXILIM
Connect manual (page 145).
Using a Smartphone as a Camera Remote Controller
(Shoot with phone)
Sending a Snapshot or Movie File from Camera Memory to a
Smartphone (Send Selected Image)