Operation Manual

Table Of Contents
61
Snapshot Tutorial
9. Use [8] and [2] to select the (Maximum CS Shots) Control Panel
option and then press [SET].
10.
Use [8] and [2] to select the maximum number of shots and then
press [SET].
11.
Press the shutter button the rest of the way and hold it down.
Shooting of images will continue as long as you depress the shutter button or until
the maximum number of images specified by “High Speed CS fps” is reached.
Half-pressing and holding the shutter button causes a pre-record buffer to be
continually updated with images. When the shutter button is fully pressed, buffer
contents are recorded along with a series of real-time images. Use Prerecord CS
when you want to make sure you do not miss fast-moving action.
1. Perform steps 1 through 10 under “Shooting with High Speed CS”
(page 60), and specify the CS speed and the maximum number of shots
settings for each continuous shutter operation.
After you specify the maximum number of shots, press [4] instead of [SET].
2. Use [8] and [2] to select the (Pre-record CS Shots) Control Panel
option and then press [SET].
3. Use [8] and [2] to select the number of Prerecord (Still) images and
then press [SET].
Settings: 0 shots, 3 shots, 5 shots, 10 shots, 15 shots, 20 shots, 25 shots
If you select “0 shots”, no pre-record images will be stored when you half-press
the shutter button.
Shooting with Prerecord CS
Shutter button
half-press
Recorded images (up to 30 images)
Pre-recorded images
Shutter button
full-press
Shutter button
release
Continuous recording of images until shutter
button released