User Manual

156
Connecting the Camera with a Smartphone
(Wireless Connection)
Use procedure to change the password you used when establishing a wireless LAN
connection between the camera and a smartphone.
IMPORTANT!
• Before changing the wireless LAN password, unpair the camera from its paired
smartphone (page 156).
1. Use [4] and [6] to move the cursor to the password digit you want to
change.
2. Use [8] and [2] to change the currently selected digit.
3. When the password is the way you want, move the cursor to “Apply”
and then press [SET].
NOTE
• Changing the wireless LAN password will terminate the connection with the
smartphone. To reconnect with the smartphone, configure wireless connection
settings (page 148). If your smartphone does not support Bluetooth low energy,
perform the operations below to change your smartphone’s Wi-Fi settings.
– iPhone:
Tap the right arrow of the field where the SSID of the camera is displayed in the
Wi-Fi settings to delete network settings. After deleting, select the camera SSID
again and input the new password.
– Android terminal:
Tap the field where the SSID of the camera is displayed in the Wi-Fi settings and
select Forget. Select the camera SSID again and input the new password.
Unpairs the camera from a smartphone.
To use the camera with a different smartphone, first unpair it from the current
smartphone.
NOTE
• When unpairing, be sure also to perform the unpairing operation on the
smartphone as well. For details, refer to the EXILIM Connect User’s Guide (page
145).
• Unpairing the camera from a smartphone will result in all pending unsent images to
remain unsent.
Changing the Camera Password for Wireless LAN Connection
(WLAN password)
Item name: WLAN password
Unpairing the Camera from a Smartphone (Unpairing)
Item name: Unpairing
B