User's Guide

Snapshot Tutorial

4. Half-press and hold the shutter button to start pre-recording.

A pre-record buffer is continually updated with images as long as the shutter

button is pressed.

• The camera will not emit shutter sounds as it pre-records images.

• Releasing the half-pressed shutter button will cause the contents of the pre-

record buffer to be deleted.

5. Full press and hold down the shutter button.

This will record the images in the pre-record buffer followed by real-time recorded

images. Shooting of images will continue as long as you depress the shutter or

until the maximum number of images specified by “High Speed CS fps” is

reached.

NOTE

• You can use any one of the following recording modes to shoot with

High Speed CS: A (Aperture AE) mode, S (Shutter Speed AE) mode, M (Manual

Exposure) mode.

• The greater the number of shots, the longer it takes to save them after shooting is

complete.

• When using a continuous shutter mode, keep the camera still until shooting is

finished.

• Zoom is disabled during continuous shutter operations.

• The snapshot image quality automatically changes to “Normal”.

• Exposure and focus for the first image are applied for successive images as well.

• The flash setting automatically becomes ? (Flash Off).

• The following image sizes cannot be selected: 3:2, 16:9. Entering the High Speed

CS mode while any one of these image sizes is selected will cause the image size

setting to change to “12M” automatically.

• The following functions cannot be used.

Motion Shutter, Triple Self-timer, Multi SR Zoom

• During CS recording some setting items are dimmed on the display and cannot be

selected.

• The Self-timer cannot be used in the Prerecord CS mode.

• If you assign “CS” to the Key Customize (page 103) “L/R Key” setting, you can

change the CS mode by pressing the [4] or [6] key.