EN Digital Camera User’s Guide Thank you for purchasing this CASIO product. • Before using it, be sure to read the precautions contained in this User’s Guide. • Keep the User’s Guide in a safe place for future reference. • For the most up-to-date information about this product, visit the official EXILIM Website at http://www.exilim.
Accessories As you unpack your camera, check to make sure that all accessories shown below are included. If anything is missing, contact your original retailer. Rechargeable lithium ion battery (NP-80) Power cord*2 Micro USB cable USB-AC adaptor*1 (AD-C54UC/AD-C54UG/AD-C53U) To attach the strap to the camera Attach strap here. 1 Strap 2 Basic Reference *1 The type of USB-AC adaptor included varies according to the country or geographic area where the camera is sold.
Read this first! • The contents of this manual are subject to change without notice. • The contents of this manual have been checked at each step of the production process. Feel free to contact us if you notice anything that is questionable, erroneous, etc. • Any copying of the contents of this User’s Guide, either in part or its entirety, is forbidden. Except for your own personal use, any other use of the contents of this manual without the permission of CASIO COMPUTER CO., LTD.
Contents Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Monitor Screen Contents and How to Change Them . . . . . . . . . . . . . . . . . . . .
]\ Advanced Settings 52 Using On-screen Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 REC Mode Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(REC) . . 54 ] ] ] ] ] ] ] ] ] ] ] Selecting a Focus Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Focus) . . . Changing the Focus Frame Shape . . . . . . . . . . . . . . . . . . . (Focus Frame) . . . Specifying the Auto Focus Area . . . . . . . . . . . . . . .
]\ Printing 79 Printing Snapshots. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Using DPOF to Specify Images to be Printed and the Number of Copies. . . . 79 ]\ Using the Camera with a Computer 82 Things you can do using a computer... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Using the Camera with a Windows Computer . . . . . . . . . . . . . . . . . . . . . . . . . 83 ] ] Viewing and Storing Images on a Computer. . . . . . . . . . .
]\ Appendix 105 Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Precautions During Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 ] ] ] Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 Battery Precautions. . . . . . .
General Guide The numbers in parentheses indicate the pages where each item is explained.
Monitor Screen Contents and How to Change Them The monitor screen uses various indicators, icons, and values to keep you informed of the camera’s status. • The sample screens in this section are intended to show you the locations of all the indicators and figures that can appear on the monitor screen in various modes. They do not represent screens that actually appear on the camera. .
. Shutter Button Half-pressed 1 6 1Recording mode (page 25) 2Flash (page 37) 3ISO sensitivity (page 67) 4Aperture value 2 5Shutter speed 3 6Focus frame (pages 27, 57) 4 5 NOTE • Depending on recording settings, the aperture, shutter speed, and ISO sensitivity values may not appear on the monitor screen. These values will be orange if the Auto Exposure (AE) is not correct for some reason. .
. Movie Playback 1 234 5 bk 9 1Repeat playback (page 68) 2Silent mode (page 96) 3File type 6 4Protect indicator (page 73) 7 5Folder name/file name (page 93) 6Movie recording time (page 44) 7Movie image quality (page 36) Date/time (page 100) 8 8 9Battery level indicator (page 18) bkEye-Fi (page 90) . Configuring Monitor Screen Settings You can turn display information on and off by pressing [8] (DISP). You can configure separate settings for the REC mode and PLAY mode.
Quick Start Basics What you can do with your CASIO camera Your CASIO camera is packed with a powerful selection of features and functions to make recording of digital images easier, including the following main functions. Premium Auto Select Premium Auto recording and the camera automatically determines whether you are shooting a subject or scenery, and other conditions. Premium Auto delivers higher image quality than standard Auto. *See page 25 for more information.
First, charge the battery prior to use. Note that the battery of a newly purchased camera is not charged. Perform the steps below to load the battery into the camera and charge it. • Your camera requires a special CASIO rechargeable lithium ion battery (NP-80) for power. Never try to use any other type of battery. To load the battery 1. Open the battery cover. 2. Load the battery.
To replace the battery Stopper 1. Open the battery cover and remove the current battery. 2. Load a new battery. Charge the Battery You can use either of the two following methods to charge the camera’s battery. • USB-AC adaptor • USB connection to a computer . To charge with the USB-AC adaptor The adaptor lets you charge the battery while it is loaded in the camera. While the camera is turned off, connect in the sequence shown below.
IMPORTANT! • Make sure that you insert the cable connector into the USB/ AV port until you feel it click securely into place. Failure to insert the connector fully can result in poor communication or malfunction. • Note that even while the connector is fully inserted, you still will be able to see the metal part of the connector as shown in the illustration. • Pressing [ON/OFF] (Power) while the USB-AC adaptor is connected to the camera will turn on the camera. Because of this, charging will stop.
. To charge using a USB connection to a computer USB connection lets you charge the battery while it is loaded in the camera. While the camera is turned off, connect in the sequence shown below (1, 2). If the camera is on, press [ON/OFF] (Power) to turn it off before connecting it to your computer. Charging time: Approximately 140 minutes Computer (power turned on) USB port [USB] port 1 USB 2 Micro USB cable (included with camera) u mark of the small (micro USB) connector facing the lens side.
Back Lamp Operation Back lamp Lamp Status Description Lit Red, (Lit/Flashing Amber) Charging Flashing Red Abnormal ambient temperature, charging taking abnormally long, or battery problem (page 115) Off, (Lit Green) Charging complete • The information in parentheses in the above table shows the lamp status while the camera is turned on during charging.
Checking Remaining Battery Power As battery power is consumed, a battery indicator on the monitor screen indicates remaining power as shown below. Remaining Power High Battery Indicator Indicator Color Cyan Low * * * Amber * * Red * Red indicates battery power is low. Charge the battery as soon as possible. Recording is not possible when is indicated. Charge the battery immediately. • The level shown by the battery indicator may change when you switch between the REC mode and PLAY mode.
Configuring Basic Settings the First Time You Turn On the Camera The first time you load a battery into the camera, a screen appears for configuring the display language, date, and time settings. Failure to set the date and time correctly will cause the wrong date and time data to be recorded with images. IMPORTANT! • A screen for language selection will not appear in step 2 of the procedure below if you purchased a camera intended for the Japanese market.
If you make a mistake configuring display language, date, or time settings with the above procedure, refer to the following pages for information about how to correct the settings. – Display language: Page 101 – Date and time: Page 100 NOTE • Each country controls its local time offset and the use of summer time, and so they are subject to change.
To load a memory card 1. Press [ON/OFF] (Power) to turn off the camera and then open the battery cover. 2. Load a memory card. Positioning the memory card so its front is facing upwards (towards the monitor screen side of the camera), slide it into the card slot all the way in until you hear it click securely into place. Front Front 3. Back Close the battery cover. IMPORTANT! • Never insert anything besides a supported memory card (page 20) into the memory card slot.
To replace the memory card Press the memory card and then release it. This will cause it to pop out of the memory card slot slightly. Pull the card out the rest of the way and then insert another one. • Never remove a card from the camera while the back lamp is flashing green. Doing so can cause the image save operation to fail and even damage the memory card. To format (initialize) a new memory card Format a memory card on the camera before using it for the first time.
Turning the Camera On and Off . To turn power on Pressing [ON/OFF] (Power) enters the REC mode so you can record images. Pressing [p] (PLAY) while in the REC mode enters the PLAY mode, which you can use to view snapshots and movies (pages 29, 68). • Pressing [p] (PLAY) turns on the camera and enters the PLAY mode. • Pressing [r] (REC) or the shutter button while in the PLAY mode returns to the REC mode. • Take care to ensure that nothing is restricting or coming into contact with the lens as it extends.
Holding the Camera Correctly Your images will not come out Horizontal Vertical clearly if you move the camera when you press the shutter button. When pressing the shutter button, be sure to hold the camera as shown in the illustration nearby, and keep it still by pressing your arms firmly against your sides as you shoot. Holding the camera still, carefully press the shutter button and take care to avoid all movement as the shutter releases and for a few moments after it releases.
Shooting a Snapshot To select an auto recording mode You can select one of two auto recording modes (Auto or Premium Auto) according to your digital imaging needs. Setting REC Screen Icon Display R Auto Ÿ Premium Auto 1. Description This is the standard Auto recording mode. With Premium Auto recording, the camera automatically determines whether you are shooting a subject or scenery, and other conditions. Premium Auto recording delivers higher image quality than standard Auto recording.
4. Use [4] and [6] to select “Auto” or “Premium Auto”, and then press [SET]. This enters the selected auto recording mode. Auto recording mode icon [ON/OFF] (Power) Shutter button [r] (REC) [SET] Remaining Snapshot Memory Capacity (page 126) Monitor screen [8][2][4][6] To shoot a snapshot 1. Point the camera at the subject. If you are using Premium Auto, text will appear in the lower right corner of the monitor screen describing the type of shot the camera has detected.
2. Half-press the shutter button to focus the image. Back lamp When focus is complete, the camera will beep, the back lamp will light green, and the focus frame will turn green. Focus frame Half-press Press lightly until the button stops. Beep, beep (Image is in focus.) 3. When you half-press the shutter button, the camera automatically adjusts exposure and focuses on the subject it is currently pointed at.
. If the image does not focus... If the focus frame stays red and the back lamp is flashing green, it means that the image is not in focus (because the subject is too close, etc.). Re-point the camera at the subject and try to focus again. . Shooting with Auto If the subject is not in the center of the frame... “Focus lock” (page 55) is the name of a technique you can use when you want to shoot an image in which the subject to be focused on is not within the focus frame in the center of the screen.
Viewing Snapshots Use the following procedure to view snapshots on the camera’s monitor screen. • For information about how to play back movies, see page 68. 1. Press [p] (PLAY) to enter the PLAY mode. • This will display one of the snapshots currently stored in memory. • Information about the displayed snapshot also is included (page 10). • You also can clear the information to [p] (PLAY) view only the snapshot (page 11). • You can zoom in on the image by rotating the zoom controller towards z (page 69).
Deleting Snapshots and Movies If memory becomes full, you can delete snapshots and movies you no longer need in order to free up storage and record more images. • In either the REC mode or PLAY mode, you can delete files simply by pressing [ ] (Delete). [ ] (Delete) IMPORTANT! • • • • Remember that a file (image) delete operation cannot be undone. Deleting an audio snapshot (page 75) deletes both the snapshot and the audio file. You cannot delete files while movie or audio recording is in progress.
. To delete specific files 1. Press [ 2. Use [8] and [2] to select “Delete Files” and then press [SET]. ] (Delete). • This displays a file selection screen. 3. Use [8], [2], [4], and [6] to move the selection boundary to the file you want to delete, and then press [SET]. • This will select the check box of the currently selected file. 4. Repeat step 3 to select other files, if you want. After you are finished selecting files, press [ ] (Delete). 5.
Snapshot Shooting Precautions Operation • Never open the battery cover while the back lamp is flashing green. Doing so can result in the image you just shot being saved incorrectly, damage to other images stored in memory, malfunction of the camera, etc. • If unwanted light is shining directly onto the lens, shade the lens with your hand when shooting an image.
Snapshot Tutorial Using the Control Panel The Control Panel can be used to configure camera settings. 1. In the REC mode, press [SET]. • You can also display the Control Panel by pressing [2]. [SET] Available settings Control Panel [8] [2] [4] [6] 2. 1 2 3 4 5 6 7 8 9 Use [8] and [2] to select the setting you want to change. This will select one of the Control Panel icons and display its settings.
NOTE • No icon is displayed for any Control Panel option (page 9) that is set to its initial default (reset) setting. An icon will appear only if you change the setting of the corresponding Control Panel option. The following are the initial defaults for Control Panel options. – Flash: Auto Flash – Self-timer: Off – Make-up: Off – Lighting: Off – Silent: Off • You also can configure settings other than those listed above (page 52). Changing the Image Size (Size) .
. To select the snapshot image size 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the “Snapshot Image Size” Control Panel option (page 33). 3. Use [4] and [6] to select an image size and then press [SET].
. Specifying Movie Image Quality Movie image quality is a standard that determines the detail, smoothness, and clarity of a movie during playback. Shooting with the high-quality (HD) setting will result in better image quality, but it also shortens the amount of time you can shoot. 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the “Movie Image Quality” Control Panel option and then press [SET] (page 33). 3. Use [4] and [6] to select the setting you want and then press [SET].
Using Flash (Flash) 1. In the REC mode, press [2] ( 2. Use [4] and [6] to select the flash setting you want and then press [SET]. ) once. • If there are no indicators on the monitor screen, you can cycle through the flash modes by pressing [2] ( ). You can turn display information on or off by pressing [8] (DISP) (page 11). Setting > Auto Flash REC Screen Icon Display None Flash [2] ( ) Description Flash fires automatically in accordance with exposure (amount of light and brightness) conditions.
IMPORTANT! • Foreign matter on the flash window can react with the light of the flash, producing some smoke and abnormal odor. Though this does not indicate malfunction, oil from your fingers and other foreign matter when left on the flash window can become difficult to clean off later. Because of this, you should make it a regular habit to wipe the window clean regularly with a soft, dry cloth. NOTE • Take care so your fingers and the strap do not block the flash.
Using the Self-timer (Self-timer) With the Self-timer, pressing the shutter button starts a timer. The shutter is released and the image is shot after a fixed amount of time. 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the “Self-timer” Control Panel option (page 33). 3. Use [4] and [6] to select the setting you want and then press [SET].
Recording Beautiful Portraits (Make-up) Make-up smoothes the skin texture of the subject and softens facial shadows caused by harsh sunlight for better looking portraits. 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the “Make-up” Control Panel option (page 33). 3. Use [4] and [6] to select “Make-up: On” and then press [SET]. Setting REC Screen Icon Display ± On ½ Off 4. Description Make-up function enabled. None Make-up function disabled.
3. Use [4] and [6] to select the setting you want and then press [SET]. Setting REC Screen Icon Display Performs brightness correction. When this option is selected, it takes longer for the image to be stored after the shutter button is pressed. Ï On Ì Off Description None Does not perform brightness correction. NOTE • Lighting is disabled during movie recording.
NOTE • The higher the digital zoom factor, the coarser the recorded image. Note that the camera also has a function that lets you record using digital zoom without image deterioration (page 43). • Use of a tripod is recommended to protect against image blur due to camera movement when shooting with telephoto. • Performing a zoom operation changes the lens aperture. .
• The image deterioration point depends on the image size (page 34). The smaller the image size, the higher the zoom factor you can use before reaching the image deterioration point. • Though digital zoom generally causes a deterioration of image quality, some digital zoom without image deterioration is possible with image sizes of “10M” and smaller. The range in which you can use digital zoom without image deterioration is indicated on the display. The deterioration point depends on the image size.
Recording Movie Images To record a movie 1. Configure the quality setting for the movie (page 36). The length of the movie you can record will depend on the quality setting you select. 2. In the REC mode, point the camera at the subject and then press [0] (Movie). Remaining recording time (page 127) This will start recording and display Y on the monitor screen. Movie recording includes monaural audio. 3. Press [0] (Movie) again to stop recording.
NOTE • Spending a long time using movie recording will cause the camera to become slightly warm to the touch. This is normal and does not indicate malfunction. • The camera also records audio. Note the following points when shooting a movie. – Take care that the microphone is not blocked by your fingers, etc. – Good recording results are not possible when the camera is too far away from what you are trying to record.
Using BEST SHOT BEST SHOT provides you with a collection of sample “scenes” that show a variety of different types of shooting conditions. When you need to change the setup of the camera, simply find the scene that matches what you are trying to achieve, and the camera sets up for it automatically. This helps to minimize the chance of ruined images due to poor exposure and shutter speed settings. .
4. Press [SET] to configure the camera with the settings for the currently selected scene. This returns to the REC mode. • The settings of the scene you selected remain in effect until you select a different scene. • To select a different BEST SHOT scene, repeat the above procedure from step 1. 5. Press the shutter button (if you are shooting a snapshot) or [0] (Movie) (if you are shooting a movie).
• High Sensitivity – The high sensitivity setting is disabled whenever the camera’s flash fires. – High sensitivity may not produce the desired results in very dark conditions. – When shooting with slow shutter speeds, use a tripod to protect against blurring due to camera movement. – Under certain lighting conditions, the camera will perform an automatic noise filtering operation to reduce digital noise in the image.
NOTE • With this “ART SHOT” scene, the flash setting automatically becomes ? (Flash Off). • Movie recording is disabled while “ART SHOT” is selected. • The ART SHOT cannot be used together with the following features. Face Detection, CS, Make-up, Color Filter • The following information applies to the Auto Focus (AF) area (page 57) of some ART SHOT scenes. – “O Tracking” is automatically disabled. – “U Spot” always selected.
Recording and Playing back Audio Only (Voice Recording) Voice Recording lets you record audio only, without a snapshot or movie. • For information about Voice Recording capacities, see page 127. . Recording audio only 1. On the BEST SHOT scene menu, select “Voice Recording”. This causes ` to appear on the monitor screen. 2. Press the shutter button to start recording. Recording time • The back lamp flashes green while recording is in progress.
About audio data • Audio files can be played back on a computer with Windows Media Player or QuickTime. – Audio Data: WAVE/IMA-ADPCM (WAV extension) . To play back an audio recording 1. In the PLAY mode, use [4] and [6] to display the Voice Recording file you want to play. ` is displayed in place of an image for a Voice Recording file. 2. Press [0] (Movie) to start playback.
Advanced Settings The following are menu operations you can use to configure various camera settings. • REC mode menu contents and operations are different from those in the PLAY mode. This section explains operations using the REC menu screen. See page 70 for information about PLAY menu screen operations. Using On-screen Menus . Example REC Menu Screen Operation 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the “MENU” Control Panel option and then press [SET] (page 33).
NOTE • [ ] (Delete) provides a helpful way to navigate around tabs and menus. – Pressing [ ] (Delete) while a tab is selected will display the viewfinder screen. – Pressing [ ] (Delete) while menu item or setting is selected will “back step” in the following sequence: Settings * Menu items * Tab. • Depending on the recording mode, some of the items on the menu that appears may not be usable.
REC Mode Settings (REC) Selecting a Focus Mode (Focus) Procedure [r] (REC) * [SET] * MENU * “REC” Tab * Focus Auto Focus is the only focus mode available while Make-up (page 40) or Face Detection (page 58) is enabled. To select another focus mode, first turn off Make-up and Face Detection.
To focus with manual focus 1. On the monitor screen, compose the image so the subject you want to focus on is within the yellow boundary. 2. Watching the image on the monitor screen use [4] and [6] to adjust focus. • At this time the image that is within the boundary will enlarge and fill the monitor screen, which aids in focusing. If you do not perform any operation for two seconds while the enlarged image is displayed, the screen in step 1 will re-appear.
2. Keeping the shutter button half-pressed (which maintains the focus setting), move the camera to compose the image. 3. When you are ready to shoot the image, press the shutter button the rest of the way down. NOTE • Focus lock also locks exposure (AE). Changing the Focus Frame Shape (Focus Frame) Procedure [r] (REC) * [SET] * MENU * “REC” Tab * Focus Frame You can use this procedure to select from among five different shapes, including a heart shape, for the focus frame.
Specifying the Auto Focus Area (AF Area) Procedure [r] (REC) * [SET] * MENU * “REC” Tab * AF Area U Spot This mode takes readings of a small area in the center of the image. This setting works well with focus lock (page 55). I Multi When you half-press the shutter button while this setting selected, the camera will select the optimum Auto Focus area from among nine possible areas. The focus frame of the area where the camera focuses will be displayed in green.
Using Face Detection (Face Detection) Procedure [r] (REC) * [SET] * MENU * “REC” Tab * Face Detection When shooting people, the face detection feature detects the faces of up to ten individuals and adjusts focus and brightness accordingly. 1. Use [8] and [2] to select “On” and then press [SET]. 2. Point the camera at the subject(s). The camera will detect human faces and display a frame around each one. 3. Half-press the shutter button.
Using Continuous Shutter (CS) Procedure [r] (REC) * [SET] * MENU * “REC” Tab * CS While Continuous Shutter is turned on, images are continually recorded until memory becomes full, as long as you keep the shutter button depressed. Releasing the shutter button stops shooting. NOTE • With continuous shutter, exposure and focus for the first image are applied for successive images as well. • Continuous shutter cannot be used in combination with any of the following.
Reducing the Effects of Camera and Subject Movement (Anti Shake) Procedure [r] (REC) * [SET] * MENU * “REC” Tab * Anti Shake You can turn on the camera’s Anti Shake feature to reduce image blur due to subject movement or camera movement when shooting a moving subject using telephoto, when shooting a fast-moving subject, or when shooting under dim lighting conditions. Setting REC Screen Icon Display Minimizes the effects of hand and subject movement.
Assigning Functions to the [4] and [6] Keys (L/R Key) Procedure [r] (REC) * [SET] * MENU * “REC” Tab * L/R Key You can assign one of the four functions listed below to the [4] and [6] keys. Setting [4]/[6] key operation EV Shift Adjusts the EV shift value (page 64). White Balance Changes the white balance setting (page 65). ISO Changes the ISO Sensitivity setting (page 67). Self-timer* Sets the self-timer time (page 39). Off Cancels [4] and [6] key assignments.
Turning on Image Review (Review) Procedure [r] (REC) * [SET] * MENU * “REC” Tab * Review While Review is turned on, the camera will display a image for about one second immediately after you press the shutter button to record it. • A review image is always displayed when shooting with Continuous Shutter (CS), regardless of the Review setting. • When shooting with some functions while “On” is selected for “Review” will cause the message “Busy... Please wait...” to appear after you press the shutter button.
Configuring Power On Default Settings (Memory) Procedure [r] (REC) * [SET] * MENU * “REC” Tab * Memory When you turn off the camera, it remembers the current settings of all enabled memory items and restores them when you turn it back on. Any memory item that is disabled will be returned to its initial default setting whenever you turn off the camera.
Image Quality Settings (Quality) Specifying Snapshot Image Quality (T Quality (Snapshot)) Procedure [r] (REC) * [SET] * MENU * “Quality” Tab * T Quality (Snapshot) Setting REC Screen Icon Description Display Fine Gives image quality priority. Normal Normal • The “Fine” setting helps to bring out details when shooting a finely detailed image of nature that includes dense tree branches or leaves, or an image of a complex pattern.
2. Press [SET]. This applies the exposure compensation value. The exposure compensation value you set remains in effect until you change it or turn off the camera (which causes it to revert to “0.0”). NOTE • When shooting under very dark or very bright conditions, you may not be able to obtain satisfactory results even after performing exposure compensation.
Setting Manual REC Screen Icon Display Description For configuring the camera manually to suit a particular light source Blank white paper 1 Select “Manual”. 2 Under the lighting conditions you plan to use when shooting, point the camera at a blank white piece of paper so it fills the entire monitor screen and then press the shutter button. 3 Press [SET]. The white balance setting is retained even if you turn off the camera.
Specifying ISO Sensitivity (ISO) Procedure [r] (REC) * [SET] * MENU * “Quality” Tab * ISO ISO sensitivity is a measure of sensitivity to light. Setting Auto REC Screen Description Icon Display None ISO 100 Adjusts sensitivity automatically according to conditions. Lower sensitivity Slow shutter speed Less noise Fast shutter speed (Set for shooting in dimly lit areas.
Viewing Snapshots and Movies Viewing Snapshots See page 29 for the procedure for viewing snapshots. Viewing a Movie 1. Press [p] (PLAY) and then use [4] and [6] to display the movie you want to view. 2. Press [0] (Movie) to start playback. Repeat playback Movie icon: » Recording time Image quality Movie Playback Controls Fast forward/ fast reverse [4] [6] • Each press of either button increases the speed of the fast forward or fast reverse operation.
Zooming an On-screen Image 1. In the PLAY mode, use [4] and [6] to scroll through the images until the one you want is displayed. 2. Rotate the zoom controller towards z ([) to zoom. You can use [8], [2], [4], and [6] to scroll the zoomed image on the monitor screen. Rotate the zoom controller towards w to unzoom the image. – When monitor screen contents are turned on, a graphic in the lower right corner of the screen shows what part of the zoomed image is currently displayed.
Other Playback Functions (PLAY) This section explains menu items that you can use to configure settings and perform other playback operations. Using the PLAY Panel Pressing [SET] in the PLAY mode will display the PLAY Panel. . Example PLAY Panel Operation 1. In the PLAY mode, press [SET]. The PLAY Panel will appear along the right side of the monitor screen. 2. [SET] PLAY Panel Use [8] and [2] to select the PLAY Panel item you want, and then press [SET]. [8] [2] 3.
Playing a Slideshow on the Camera (Slideshow) 1. In the PLAY mode, press [SET]. 2. Use [8] and [2] to select the “Slideshow” PLAY Panel option and then press [SET] (page 70). Start Starts the slideshow. Time Time from the start to the end of the slideshow 1 to 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes Interval Amount of time each image remains displayed Use [4] and [6] to select a value from 1 to 30 seconds, or “MAX”.
Rotating an Image (Rotation) 1. In the PLAY mode, display the snapshot you want to rotate. 2. Press [SET]. 3. Use [8] and [2] to select the “Rotation” PLAY Panel option and then press [SET] (page 70). 4. Use [8] and [2] to select “Rotation” and then press [SET]. Each press of [SET] will rotate the displayed image 90 degrees left. 5. When the displayed image is at the orientation you want, press [ ] (Delete). NOTE • Note that this procedure does not actually change the image data.
Selecting Images for Printing (DPOF Printing) Procedure [p] (PLAY) * Snapshot Screen * [SET] * MENU * “PLAY” Tab * DPOF Printing See page 79 for details. Protecting a File Against Deletion (Protect) Procedure [p] (PLAY) * [SET] * MENU * “PLAY” Tab * Protect Protects specific files. 1Use [4] and [6] to scroll through the files until the one you want to protect is displayed. 2Use [8] and [2] to select “On” and then press [SET]. An image that is protected is indicated by the › icon.
Resizing a Snapshot (Resize) Procedure [p] (PLAY) * Snapshot Screen * [SET] * MENU * “PLAY” Tab * Resize You can reduce the size of a snapshot and save the result as a separate snapshot. The original snapshot is also retained. You can select resize an image to one of three image sizes: 10M, 5M, VGA. • Resizing a 3:2 or 16:9 size snapshot will create an image with an aspect ratio of 4:3, with both sides cut off.
Adding Audio to a Snapshot (Dubbing) Procedure [p] (PLAY) * Snapshot Screen * [SET] * MENU * “PLAY” Tab * Dubbing You can add audio to a snapshot after you shoot it. You can re-record a snapshot’s audio whenever you want. You can record up to about 30 seconds of audio for a single snapshot. 1. Press [SET] to start audio recording. Remaining recording time 2. Press [SET] again to stop audio recording. • Take care that you do not block the camera’s microphone with your fingers while recording.
Voice Recording Playback Controls Fast forward/fast reverse [4] [6] Play/pause [SET] Volume adjustment Press [2] and then press [8] [2]. Display content switching [8] (DISP) Stop playback [0] (Movie) • Audio of an Audio Snapshot also can be played back on a computer with Windows Media Player or QuickTime. Copying Files (Copy) Procedure [p] (PLAY) * [SET] * MENU * “PLAY” Tab * Copy Files can be copied from the camera’s built-in memory to a memory card or from a memory card to built-in memory.
Dynamic Photo This camera comes with a number of subjects in built-in memory (“built-in subjects”), which you can insert into snapshots to create Dynamic Photo images. • The term “built-in subjects” refers to the moving figures and characters that came pre-programmed in the camera’s built-in memory. Built-in Subject Another Image ™ Dynamic Photo Image Inserting a Built-in Subject into a Snapshot or Movie (Dynamic Photo) Use the following procedure to insert a built-in subject image into a snapshot.
4. When everything is the way you want, press [SET]. This merges the subject with the background image and creates a Dynamic Photo image. • Inserting an animated subject into a snapshot will cause the resulting Dynamic Photo image to be saved as a movie file. Inserting a stationary (non-moving) character will cause the resulting image to be saved as a snapshot. In both cases, the snapshot used as the background is also retained as-is. • The final movie format is Motion JPEG standard.
Printing Printing Snapshots Professional Print Service* You can take a memory card that contains the images you want to print to a professional print service and have them printed. Printing on a Home Printer* You can use a printer equipped with a memory card slot to print images directly from a memory card. For details, see the user documentation that comes with your printer. Printing with a Computer After transferring the images to your computer, use commercially available software to print.
. Configuring DPOF Settings Individually for Each Image Procedure [p] (PLAY) * Snapshot Screen * [SET] * MENU * “PLAY” Tab * DPOF Printing * Select images 1. Use [4] and [6] to scroll through the files until the image you want to print is displayed. 2. Use [8] and [2] to specify the number of copies. You can specify a value up to 99. Specify 00 if you do not want to print the image. • If you want to include the date in the images, press [0] (Movie) so “On” is shown for date stamping.
. Date Stamping You can use one of the following three methods to include the recording date in the printout of an image. Configuring camera settings Configure DPOF settings (page 79). You can turn date stamping on and off each time you print. You can configure settings so some images include the date stamp and some don’t. Configure the Camera’s Time Stamp setting (page 100). • The camera’s Time Stamp setting imprints the date into a snapshot when you shoot it, so the date is always included when you print.
Using the Camera with a Computer Things you can do using a computer... You can perform the operations described below while the camera is connected to a computer. Save images to a computer and view them there • Save images and view them manually (USB connection) (pages 83, 87). • Transfer images to a computer automatically over a wireless LAN for viewing (Eye-Fi) (page 90). Play back and edit movies • You can play back movies (pages 86, 89).
Using the Camera with a Windows Computer When you want to do this: Operating System Version Required Software See page: Windows 8, Save images to a Windows 7, Installation not required.
. To connect the camera to your computer and save files 1. Turn off the camera and then use the micro USB cable that comes with the camera to connect it to your computer. USB port • For details about connecting to the camera and precautions when connecting, see page 16. 2. Micro USB cable (included with camera) Press [ON/OFF] (Power) to turn on the camera. When you turn on the camera, check to make sure that the color of its back lamp changes from red to green or amber (page 17).
8. Windows 8 users: On the “Documents” menus, click “Home” and then “Paste”. Windows 7 users: On the “Documents” “Organize” menu, select “Paste”. Windows Vista users: On the “Documents” “Edit” menu, select “Paste”. Windows XP users: On the “My Documents” “Edit” menu, select “Paste”. This will paste the “DCIM” folder (and all the image files it contains) into your “Documents” (Windows 8, Windows 7, Windows Vista) or “My Documents” (Windows XP) folder.
Playing Movies Windows Media Player, which is already installed on most computers, can be used for movie playback. To play back a movie, first copy the movie to your computer and then double-click the movie file. . Minimum Computer System Requirements for Movie Playback The minimum system requirements described below are necessary to play back movies recorded with this camera on a computer. Operating System : Windows 8, Windows 7, Windows Vista, Windows XP (SP3) CPU : Image Quality “HD”: Pentium 4 3.
Using the Camera with a Macintosh Operating When you want to do System this: Version Required Software Save images to your Macintosh and view them there manually Installation not required. 87 Save images to your Macintosh OS X automatically/Manage images iPhoto, which comes bundled with some Macintosh products. – Play movies With QuickTime, which comes bundled with your operating system.
. To connect the camera to your computer and save files 1. Turn off the camera and then use the micro USB cable that comes with the camera to connect it to your Macintosh. USB port • For details about connecting to the camera and precautions when connecting, see page 16. 2. Micro USB cable (included with camera) Press [ON/OFF] (Power) to turn on the camera. When you turn on the camera, check to make sure that the color of its back lamp changes from red to green or amber (page 17).
. To view copied images 1. Double-click the camera’s drive icon. 2. Double-click the “DCIM” folder to open it. 3. Double-click the folder that contains the images you want to view. 4. Double-click the image file you want to view. • For information about file names, see “Memory Folder Structure” on page 94. • An image that was rotated on the camera will be displayed on your Macintosh screen in its original (unrotated) orientation.
Using an SD Memory Card with Built-in LAN Transferring Images with an Eye-Fi Card (Eye-Fi) Shooting with an Eye-Fi wireless SD memory card loaded in the camera makes it possible to transfer image data automatically to a computer via wireless LAN. 1. Configure LAN access point, transfer destination and other settings for the Eye-Fi card in accordance with the instructions that come with the Eye-Fi card. 2. After configuring settings, load the Eye-Fi card into the camera and record.
• Proper Eye-Fi card data communication may not be possible due to camera settings, battery level, or operating conditions. Using a Smartphone to Play Back Images Stored on a FlashAir Card (FlashAir) Loading a commercially available FlashAir card in the camera makes it possible to view images on and copy them to a smartphone or computer over a wireless LAN connection. • For more information, see the instructions that come with the card. 1.
IMPORTANT! • When on an aircraft or in any other location where use of wireless communication is limited or prohibited, do not use a FlashAir card, or change the camera’s “FlashAir” setting (page 97) and the FlashAir card’s setting to those shown below. FlashAir: Off Memory Card: Start with the control image • Loading a FlashAir card into the camera will cause the FlashAir icon to appear on the monitor screen.
Files and Folders The camera creates a file and saves it each time you shoot a snapshot, record a movie, or perform any other operation that stores data. Files are grouped by storing them in folders. Each file and folder has its own unique name. • For details about how folders are organized in memory, see “Memory Folder Structure” (page 94). Name and Maximum Number Allowed Example Each folder can contain up to 9999 files named CIMG0001 through CIMG9999.
Memory Card Data The camera stores images you shoot in accordance with the Design Rule for Camera File System (DCF). . About DCF The following operations are supported for DCF-compliant images. Note, however, that CASIO makes no performance guarantees concerning these operations. • Transferring this camera’s DCF-compliant images to another manufacturer’s camera and view them. • Printing this camera’s DCF-compliant images on another manufacturer’s printer.
. Supported Image Files • Image files shot with this camera • DCF-compliant image files This camera may not be able to display an image, even if it is DCF-compliant. When displaying an image recorded on another camera, it may take a long time for the image to appear on this camera’s monitor screen. . Built-in Memory and Memory Card Data Handling Precautions • Whenever copying memory contents to your computer, you should copy the DCIM folder and all of its contents.
Other Settings (Set Up) This section explains menu items that you can use to configure settings and perform other operations in both the REC mode and PLAY mode. See the following for more information. – REC Menu (page 52) – PLAY Menu (page 70) Shooting and Playing back Images without Disturbing Others (Silent) Procedure [SET] * MENU * “Set Up” Tab * Silent The Silent mode automatically configures camera settings to avoid disturbing others around you.
Turning off Eye-Fi Card Communication (Eye-Fi) Procedure [SET] * MENU * “Set Up” Tab * Eye-Fi Select “Off” to disable Eye-Fi card communication (page 90). Configuring FlashAir Card Communication Settings (FlashAir) Procedure [SET] * MENU * “Set Up” Tab * FlashAir Selecting “Start with the control image” for the FlashAir card setting and selecting “On” for the camera’s “FlashAir” setting will establish a FlashAir wireless LAN connection (page 91).
Configuring a Startup Image (Startup) Procedure [SET] * MENU * “Set Up” Tab * Startup Display the image you want to use as your startup image and then select “On”. • The startup image does not appear when you turn on the camera by pressing [p] (PLAY). • You can specify a snapshot you recorded as the startup image, or you can use the special startup image provided in the camera’s built-in memory. • If you select an audio snapshot as the startup image, the audio will not play at startup.
Configuring World Time Settings (World Time) Procedure [SET] * MENU * “Set Up” Tab * World Time You can use the World Time screen to view the current time in a zone that is different from your Home City when you go on a trip, etc. World Time displays the current time in 162 cities in 32 time zones around the globe. 1. Use [8] and [2] to select “Destination” and then press [6]. • To change the geographic area and city for the time where you normally use the camera, select “Home”. 2.
Time Stamping Snapshots (Timestamp) Procedure [SET] * MENU * “Set Up” Tab * Timestamp You can configure the camera to stamp the recording date only, or date and time in the lower right corner of each snapshot. • Once date and time information is stamped into a snapshot, it cannot be edited or deleted. Example: July, 10, 2015, 1:25 p.m.
Specifying the Date Style (Date Style) Procedure [SET] * MENU * “Set Up” Tab * Date Style You can select from among three different styles for the date. Example: July, 10, 2015 YY/MM/DD 15/7/10 DD/MM/YY 10/7/15 MM/DD/YY 7/10/15 Specifying the Display Language (Language) Procedure [SET] * MENU * “Set Up” Tab * Language . Specify the display language you want. 1 Select the tab on the right. 2 Select “Language”. 3 Select the language you want.
Configuring Auto Power Settings (Auto Power Off) Procedure [SET] * MENU * “Set Up” Tab * Auto Power Off Auto Power Off turns off the camera whenever no camera operation is performed for a preset amount of time. Trigger Time Settings: 1 min, 2 min, 5 min (The trigger time is always 5 minutes in the PLAY mode.) • Auto Power Off is disabled under any of the following conditions.
Configuring [p] Setting (PLAY) Procedure [SET] * MENU * “Set Up” Tab * PLAY Power On Camera turns on whenever [p] (PLAY) is pressed. Power On/Off Camera turns on or off whenever [p] (PLAY) is pressed. Disable Camera does not turn on or off whenever [p] (PLAY) is pressed. • With “Power On/Off”, the camera turns off when you press [p] (PLAY) in the PLAY mode.
Formatting Built-in Memory or a Memory Card (Format) Procedure [SET] * MENU * “Set Up” Tab * Format If a memory card is loaded in the camera, this operation will format the memory card. It will format built-in memory if no memory card is loaded. • The format operation will delete all contents on the memory card or in built-in memory. It cannot be undone. Make sure you do not need any data currently on the card or in built-in memory before you format it.
Appendix Safety Precautions *DANGER This symbol indicates information that, if ignored or applied incorrectly, creates the danger of death or serious personal injury. *WARNING This indication stipulates matters that have the risk of causing death or serious injury if the product is operated incorrectly while ignoring this indication.
*DANGER • Failure to observe any of the following precautions creates the risk of battery overheating, fire, and explosion. – Never use or leave the battery near open flame. – Do not expose the battery to heat or fire. – Make sure the battery is oriented correctly when charging it. – Never carry or store the battery together with items that can conduct electricity (necklaces, pencil lead, etc.).
*WARNING . Smoke, abnormal odor, overheating, and other abnormalities $ • Continued use of the camera while it is emitting smoke or strange odor, or while it is overheating creates the risk of fire and electric shock. Immediately perform the following steps whenever any of the above symptoms are present. 1. Turn off the camera. 2. If you are using the USB-AC adapter to power the camera, unplug the power plug from the power outlet.
*WARNING • Never touch the power plug while your hands are wet. Doing so creates the risk of electric shock. • Should the power cord or power plug become damaged, contact your retailer or nearest CASIO authorized service center. • Do not use the USB-AC adapter in areas where liquids* might spill on them. Liquids create the risk of fire and electric shock. * Liquids: Water, sports drinks, seawater, animal or pet urine, etc.
*WARNING . Dropping and Rough Treatment - • Continued use of the camera after it is damaged by dropping or other rough treatment creates the risk of fire and electric shock. Immediately perform the following steps whenever any of the above symptoms are present. 1. Turn off the camera. 2. If you are using the USB-AC adapter to power the camera, unplug the power plug from the wall outlet. Also, remove the battery from the camera, taking care to protect yourself against burn injury. 3.
*CAUTION . Rechargeable Battery • If battery charging does not end normally within the specified charging time, stop charging anyway and contact your local CASIO authorized service center. Continued charging creates the risk of battery overheating, fire, and explosion. • Be sure to read the user documentation that comes with the camera and special charger unit before using or charging the battery. • Store batteries in a location that cannot be reached by infants and young children.
*CAUTION . Monitor Screen • Do not apply strong pressure to the LCD panel surface or subject it to strong impact. Doing so can cause the display panel glass to crack and lead to personal injury. • Should the monitor screen ever become cracked, never touch any of the liquid inside the monitor screen. Doing so creates the risk of skin inflammation. • Should monitor screen liquid ever get into your mouth, immediately rinse your mouth out and contact your physician.
Precautions During Use . Data Error Precautions Your digital camera is manufactured using precision digital components. Any of the following creates the risk of corruption of data in camera memory.
. Lens • Never apply too much force when cleaning the surface of the lens. Doing so can scratch the lens surface and cause malfunction. • You may sometimes notice some distortion in certain types of images, such as a slight bend in lines that should be straight. This is due to the characteristics of lenses, and does not indicate malfunction of the camera. . Caring for your camera • Never touch the lens or flash window with your fingers.
. Copyrights Except for your own personal enjoyment, unauthorized use of snapshots or movies of images whose rights belong to others, without the permission of the right holder, is forbidden by copyright laws. In some cases, shooting of public performances, shows, exhibitions, etc. may be restricted entirely, even if it is for your own personal enjoyment.
Power Supply Charging . If the camera’s back lamp starts flashing red... • Ambient temperature or the temperature of the battery may be either too high or too low. Disconnect the USB cable and wait until temperature is within the allowable charging range before trying again. • Battery contacts may be dirty. Wipe them with a dry cloth. • Try connecting to a different computer USB port. Depending on the setup of your computer, you may not be able to charge the camera’s battery over a USB connection.
Using the Camera in another Country . Precautions during Use • The bundled USB-AC adaptor is designed for operation with any power supply in the range of 100V to 240V AC, 50/60Hz. Note, however, that the shape of the power plug depends on each country or geographic area. Before taking the camera and USB-AC adaptor along on a trip, check with travel agent about the power supply requirements in your destination(s).
. Memory Card Handling Precautions • Certain types of memory cards can slow down processing speed. Whenever possible use an Ultra High-Speed Type memory card. Note, however, that not all operations can be guaranteed even if an Ultra High-Speed Type memory card is used. Certain movie quality settings can result in too much time being required to record data, which can result in breaks in the image and/or audio during playback. If this happens, the » and Y will flash on the monitor screen.
“Set Up” Tab Silent Off Adjust – Eye-Fi On Date Style – FlashAir On Language – Sleep 1 min Auto Power Off 2 min Sounds Startup: Sound 1 / Half Shutter: Sound 1 / Shutter: Sound 1 / Operation: Sound 1 / = Operation: ...//// / = Play: ...//// REC Disable PLAY Power On Ü Disabled Off Startup Off Format – File No. Continue Reset – World Time – Timestamp Off .
When things don’t go right... Troubleshooting Problem Possible Cause and Recommended Action Power Supply Power does not turn on. 1)The battery may not be loaded correctly (page 13). 2)The battery may be dead. Charge the battery (page 14). If the battery goes dead soon after being charged, it means the battery has reached the end of its life and needs to be replaced. Purchase a separately available CASIO NP-80 rechargeable lithium ion battery. The camera suddenly powers down.
Problem Possible Cause and Recommended Action The subject is out of focus in the recorded image. The image may not be focused properly. When composing the image, make sure the subject is located inside the focus frame. The flash does not fire. 1)If ? (Flash Off) is selected as the flash mode, change to another mode (page 37). 2)If the battery is dead, charge it (page 14).
Problem Possible Cause and Recommended Action A recorded image was not saved. 1)Camera power may have been turned off before the save operation was complete, which will result in the image not being saved. If the battery indicator shows , charge the battery as soon as possible (page 18). 2)You may have removed the memory card from the camera before the save operation was complete, which will result in the image not being saved. Do not remove the memory card before the save operation is complete.
Problem Possible Cause and Recommended Action Playback The color of the playback image is different from what appears on the monitor screen when shooting. Sunlight or light from another source may be shining directly into the lens when you are shooting. Position the camera so sunlight does not shine directly into the lens. Images are not displayed. This camera cannot display non-DCF images recorded onto a memory card using another digital camera.
Problem Possible Cause and Recommended Action Language selection 1)You did not configure initial settings after purchasing the screen appears camera or the camera may have been left with a dead when the camera is battery. Check the camera setup (pages 19, 101). turned on. 2)There may be a problem with the camera’s memory data. If this is the case, perform the reset operation to initialize the camera’s setup (page 104). After that, configure each setting.
Display Messages ALERT The camera’s protection function may have activated because camera temperature is too high. Turn off the camera and wait until it cools down before trying to use it again. Battery is low. Battery power is low. There is something wrong with the memory card. Turn off the camera, remove the memory card and then reload it into the camera. If this message re-appears when you turn the camera back on, format the memory card (page 104).
RETRY POWER ON The lens came into contact with an obstruction while moving. The camera will turn off automatically when this message appears. Remove the obstruction and turn power back on again. SYSTEM ERROR Your camera system is corrupted. Contact your retailer or a CASIO authorized service center. The LOCK switch of the SD, SDHC, or SDXC memory card loaded in the camera is in the The card is locked. locked position. You cannot store images to or delete images from a memory card that is locked.
Number of Snapshots/Movie Recording Time/ Voice Recording Time Snapshot Image Size (Pixels) 16M (4608x3456) 3:2 (4608x3072) 16:9 (4608x2592) 10M (3648x2736) 5M (2560x1920) 3M (2048x1536) VGA (640x480) Quality Approximate File Size Built-in Memory*1 Recording Capacity SD Memory Card*2 Recording Capacity Fine 5.57MB 3 2790 Normal 3.71MB 5 4189 Fine 4.92MB 4 3159 Normal 3.28MB 6 4738 3790 Fine 4.10MB 5 Normal 2.75MB 7 5651 Fine 3.38MB 6 4598 Normal 2.27MB 9 6847 Fine 1.
Movies Image Approximate Data Size/Pixels Rate (Frame Rate) (Audio) Maximum File Size HD 30.2 Megabits/ 1280x720 second (Monaural) (30 frames/second) 4GB or 29 minutes STD 10.6 Megabits/ 640x480 second (Monaural) (30 frames/second) Built-in Memory*1 Recording Capacity Maximum Continuous Recording File Size of Recording 1-minute Time with Time per SD Memory Movie Movie*3 2 Card* 6 seconds*4 1 hour 5 minutes 226.3MB 17 minutes 9 seconds 18 seconds 3 hours 6 minutes 79.
Specifications File Format Snapshots: JPEG (Exif Version 2.3); DCF 2.0 standard; DPOF compliant Movies: Motion JPEG AVI, IMA-ADPCM audio (monaural) Audio (Voice Recording): WAV (monaural) Recording Media Built-in Memory (Image Storage Area: 28.0MB) SD/SDHC/SDXC Recorded Image Sizes Snapshot: 16M (4608x3456), 3:2 (4608x3072), 16:9 (4608x2592), 10M (3648x2736), 5M (2560x1920), 3M (2048x1536), VGA (640x480) Movies: HD (1280x720), STD (640x480) Effective Pixels 16.
Sensitivity (Standard Output Sensitivity) Snapshots: Auto, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600 equivalent Movies: Auto Flash Modes Auto, Off, On, Red-eye reduction Flash Range (ISO Sensitivity: Auto) Wide Angle: 0.4 m to 3.6 m (1.3' to 11.8') Telephoto: 1.5 m to 1.8 m (4.9' to 5.9') • Range is affected by optical zoom. Flash Charging Time Approximately 5 seconds maximum Monitor Screen 3.
Approximate Battery Life All of the values provided below represent the approximate amount of time under normal temperature (23°C (73°F)) before the camera turns off. These values are not guaranteed. Low temperatures shorten battery life.
. Rechargeable lithium ion battery (NP-80) Rated Voltage 3.7 V Rated Capacitance 700 mAh Operating Temperature Requirements 0 to 40°C (32 to 104°F) Dimensions 31.4 (W) x 39.5 (H) x 5.9 (D) mm (1.24" (W) x 1.56" (H) x 0.23" (D)) Weight Approximately 15 g (0.53 oz) . USB-AC adaptor (AD-C54UG) Input 100 to 240 V AC, 50/60 Hz, 90 mA Output 5.0 V DC, 650 mA Operating Temperature Requirements 5 to 35°C (41 to 95°F) Dimensions 64.6 (W) x 56.9 (H) x 24 (D) mm (2.5" (W) x 2.2" (H) x 0.
Declaration of Conformity According to EU Directive Manufacturer: CASIO COMPUTER CO., LTD.
CASIO COMPUTER CO., LTD.
