User Manual

NOTE

• The quality of the movie is in accordance with the camera setup. Configure the

movie quality setting you want before starting Remote Capture.

• Alignment guides are not displayed on the smartphone while it is connected with a

camera. The video image is not displayed on the smartphone while movie

recording is in progress, so be sure to make any changes to image composition

before you connect the smartphone with the camera.

You can use the procedure below to send an image displayed in the PLAY mode

(including movies) to a smartphone by pressing the camera’s front shutter button.

After sending an image to a smartphone, you can then upload it to a social

networking service.

1. Turn on the camera and enter the PLAY mode.

2. On the camera, press [MENU].

3. On the camera, select “Front Shutter” from the “PLAY MENU”.

4. On the camera, select “Quick Send” and then press [SET].

• Pressing the front shutter button sends the displayed image to a smartphone

via wireless LAN.

Sending the Image Displayed on the Camera Monitor Screen

to a Smartphone (Quick Send)

To assign the Quick Send function to the front shutter button