Specifications

— 11 —
■ Memory Status
You can use the following procedure at any time to check the current status of BN Unit
memory.
To check memory status
1. Press MENU BAR to display the menu bar.
2. Use to highlight SYSTEM, and then press .
3. Use to highlight CAPACITY, and then press OK.
4. Press ESC to close the dialog box.
■ Memory Management
The memory of your BN Unit is designed to make your nomal data input and recall operations as quick
and efficient as possible. After repeated storage and deletion of data, however, you may find that you
are unable to store new data, even after you have deleted some data from memory. When this hap-
pens, you need to perform the following “memory management” procedure, which cleans up and
rearranges unused memory to make it available for storage of more data.
Note
• When you need to perform memory management depends entirely how often you delete data from
memory and store new data. The more you delete and store, the sooner you will need to perform
the memory management procedure.
To perform memory management
1. Execute the SYSTEM menu’s MEMORY MANAGEMENT command.
2. In the dialog box that appears, press OK to start memory management or ESC to close the
dialog box without doing anything.
Memory used Remaining memory