Specifications

— 32 —

8 CONTRAST

Press ESC, then 7 button. The following display appears.

9 PATTERN-6

Press ESC, then 8 button. The following display appears.

According to this display,

change the contrast value from

00 to 1F using Cursor keys.

Doing so, brightness of display

changes from dark to light, and

then from light to dim. The con-

trast is best with default con-

trast value 10.

Touch [ESC] Hard lcon Them Test END

Touch [<-] Key Then [DRANK]

Touch [->] Key Then [THIN] ( [LIGHT] )

<< DARK <- + -> THIN(LIGHT) >>

Contrast Value : 10

STRIPE

@ PATTERN-7

Press ESC, then 9 button. The following display appears.

REVERSED STRIPE

A Press ESC button twice. Doing so, TEST MENU display appears.

5-2-2. MEMORY CHECK

1 Pressing 2 button, the following MEMORY MENU appears.

SHIFT

CAPS

ACC

COMMAND

# # # MEMORY MENU # # #

1 SRAM MEMORY CHECK

2 CHECK SUM

3 BUS CHECK

4 SRAM WRITE CHECK

5 SRAM READ CHECK

6 FLASH CROSS BIT CHECK

7 FLASH CROSS BIT CHECK F