Specifications

— 59 —
11-2. Disassembly for display side
1. Perform the items 1 ~ 9 and 17 of Disassembly of keyboard side .
2. Remove two screws S5 .
3. Remove the lower case
D
using a opener as shown bellow.
Then remove two axes AX1 of this lower case while opening out as shown below.
4. Remove FPC
H
from the connector CN701 of PCB ASSY
3
as shown to the item 11 of
Disassembly of keyboard side.
5. Remove Display side from keyboard side while shutting as shown below.
6. Remove two screw S6 .
7. Remove the metal fittings
M
.
8. Remove six screws S7 , two screws S8 and two washers W2 .
Next, remove the upper case
C
, and then peel the frame
G
from
C
while taking out this frame
from two holes A of this upper case.
9. Remove two wires WIR2 soldered to PCB ASSY
3
.
10. Peel the buzzer
I
from the inner case
E
.
11. Take out the LCD ASSY
F
after peeling the inner case
E
from PCB ASSY.
12. Disassemble the LCD ASSY referring to EXPLODED VIEW (1/2) and CROSS SECTION of LCD
ASSY of EXPLODED VIEW (2/2).
<Display and upper case side>
Blade of opener
<Lower case side>
LCD display
Open
Lower case (of display side)
<Keyboard side>
Axes
LCD display
Shut
Lower case (of display side)
Axes
<Keyboard side>