For fx-9860G Series Installing an Add-in Application User’s Guide http://edu.casio.
Contents Installing an Add-in Application Using FA-124 PROGRAM-LINK............. E-2 Installing an Add-in Application Using an SD Card ..................................
Installing an Add-in Application Using FA-124 PROGRAM-LINK 1. On your computer’s desktop, double-click “FA-124”. • This will start up FA-124 PROGRAM-LINK. 2. Click the 3. In the Computer window, right click “Default”. 4. On the shortcut menu that appears, select “Import fx-9860 File”. icon to switch to display of Storage Memory contents. • This will display a dialog box for selecting the file you want. 5. Click the file type down arrow button and then select “G1A File(*.
6. Select the add-in that you want to install. • If you are installing an add-in from the CD-ROM (Physium, Geometry, etc.), navigate to the CD-ROM that is in your computer’s CD-ROM drive and then select the add-in. 7. Click [Open]. • This should cause the imported add-in file to appear in the Computer window. * If the “Memory Full Error” occurs, delete files in the Computer window that you no longer need. Next, right-click “Default” and then select “Optimization” from the shortcut menu that appears.
10. In the Computer window, right-click the add-in application you want to install and then click “Copy” on the shortcut menu that appears. 11. In the fx-9860 window, right-click the user name and then select “Paste” on the shortcut menu that appears. * In place of steps 10 and 11, you could also drag the add-in application from the Computer window and drop it onto the user name in the fx-9860 window.
12. The data will be copied from the Computer window to the fx-9860 window. 13. After the copy operation is complete, the add-in application will appear under the user name in the fx-9860 window. 14. Click the icon. • This will terminate the connection between the calculator and FA-124 PROGRAM-LINK and cause the message “Complete!” to appear on the calculator display. 15. On the calculator, press the J key and then the m key. • Confirm that the add-in application’s icon is on the Main Menu.
Installing an Add-in Application Using an SD Card * This operation is supported only on models equipped with SD card capabilities. 1. Insert the SD card into an SD card drive connected to your computer. 2. Copy the add-in file (*g1a) you want to install to the SD card. 3. Insert the SD card that contains the add-in file into the calculator. 4. Enter the MEMORY Mode. 5. Press #(SD). • This will display the data stored on the SD card. 6.
10. In Storage Memory, select ROOT as the destination and then press the w key. • This will cause the “Complete!” message to appear. 11. Press the J key. 12. Press the m key. • Confirm that the add-in application’s icon is on the Main Menu.
CASIO COMPUTER CO., LTD.
