User`s guide
Table Of Contents
- Getting Started
- Contents
- 1. Installing and Uninstalling fx-9860G Slim Manager PLUS
- 2. Screen Configuration
- 3. Emulator Mode and Key-Log Editor Mode
- 4. Emulating fx-9860G Slim Calculator Operation
- 5. Using the Emulator Key-Log
- 6. Configuring Options Dialog Box Setting
- 7. Other Functions
- 8. File Types Supported by fx-9860G Slim Manager PLUS
- 9. Differences between fx-9860G Slim Calculator and fx-9860G Slim Manager PLUS Functions
- 10. Using Screen Receiver to Display the Calculator Screen Image on Your Computer
- 11. Error Message Table
E-41
k Configuring fx-9860G Slim Communication Settings
Before you can connect the calculator to your computer, you first need to perform the following
procedure and configure the calculator’s communication settings.
To configure the fx-9860G Slim calculator communication settings
1
. From the Main Menu, enter the LINK mode.
2
. Press $(CABL).
• This displays the Select Cable Type screen.
3
. Press !(USB).
4
. Press &(CAPT).
• This displays the Capture Set Mode screen.
5
. Press #(OHP).
• This displays the screen shown nearby, which indicates
that the setup procedure is complete.
To display the calculator screen image on your computer
1
. Use the USB cable that comes with the calculator to connect the calculator to your computer.
2
. On the [Tools] menu, select [Screen Receiver], or click on the toolbar.
3
. A short while after Screen Receiver starts up, an image of the calculator screen will appear on
your computer.