User Manual

9-6
To select this: Do this:
An entire column of cells.
Move the cell cursor to row 1 of the column whose cells
you want to select and then press f. Pressing f
while the cell cursor is located at cell C1, for example,
will select the entire column C (from C1 to C999).
This will cause C1:C999 (which indicates the selected
range) to appear in the edit box.
All of the cells in the spreadsheet
Press d while the entire column A is selected or
press f while the entire row 1 is selected. This will
select all of the cells in the spreadsheet and display the
spreadsheet file name in the edit box.
u Using the JUMP Command to Move the Cell Cursor
To move the cell cursor to here: Do this:
A particular cell
1. Press 2(EDIT) 4(JUMP) 1(GO).
2. On the dialog box that appears, enter the name
of the cell (A1 to Z999) to which you want to
jump.
3. Press w.
Line 1 of the current column
Press 2(EDIT) 4(JUMP) 2(TOP ↑ ).
Column A of the current row
Press 2(EDIT) 4(JUMP) 3(TOP ← ).
Last line of the current column
Press 2(EDIT) 4(JUMP) 4(BOT ↓ ).
Column Z of the current row
Press 2(EDIT) 4(JUMP) 5(BOT → ).
u To select a range of cells
1. Move the cell cursor to the start point of the range of cells you want to select.
• You could select and entire row or column of cells as the start point, if you want. For
details about selecting cells, see “To select cells” on page 9-5.
2. Press !
i(CLIP).
• This will change the cell cursor to a thick-line boundary instead of the normal highlighting.
3. Use the cursor keys to move the cell cursor to the end
point of the range of cells you want to select.
• The edit box will show the range of the selected cells.
• To cancel cell selection, press J. If you do, the cell
cursor will be located at the end point of the range you
selected.