User Manual

11-10
The message “Complete!” appears when the backup operation is finished.
Press J to return to the screen displayed in step 1.
The following message appears if there is already backup data in the storage memory.
Press 1(Yes) to back up the data, or 6(No) to cancel the backup operation.
A “Memory Full” occurs when there is not enough space available in the storage memory to
complete the backup operation.
u To restore backup data to the main memory
1. On the initial MEMORY mode screen press 4(BKUP).
• On the screen that appears, you can confirm whether or not there is backup data in the
storage memory.
2. Press 2(LOAD).
This displays the folder selection screen.
3. Specify the folder you want.
• Highlight ROOT to select the data to the root directory.
• To select the data to a specific folder, use f and c to move the highlighting to the
desired folder and then press 1(OPEN).
4. Press 1(LOAD).*
1
• A message appears to confirm whether or not you really
want to restore the backed up data.
*
1
The message “No Data” will appear if there is no
backup data stored in the folder. Pressing J will
return the screen in step 1.
Press 1(Yes) to restore the data and delete any data currently in the area.
Press 6(No) to cancel the data backup operation.
The message “Complete!” appears when the restore operation is finished.
Press J to return to the screen displayed in step 1.