User Manual

13-3
k Connecting and Disconnecting with a Computer in the Mass Storage
Mode
Use the optionally available USB cable* to connect to your computer.
* Included with the calculator in some areas.
Important!
Never touch the USB cable plugs and screen while a data communication operation is in
progress. Static electricity from your fingers can cause data communication to be terminated.
u To establish a connection between the calculator and a computer
1. Start up your computer.
2. After starting up your computer, use the USB cable to connect it to the calculator.
• The calculator will turn on automatically and the “Select Connection Mode” screen will
appear.
3. Press 1(USB Flash).
• The message “Preparing USB” will appear on the
calculator screen. Stand by and do not perform any
operation on the calculator. Establishing a connection
between the calculator and a computer will cause the
screen shown nearby to appear.
4. On your computer, open the calculator drive.
• If you are using Windows, the location of the calculator drive will depend on your Windows
Version. Use Windows Explorer to open the calculator drive.
- Windows 8.1: Inside PC
- Windows 10: Inside This PC
• Under OS X or macOS, the calculator drive icon appears on the Mac desktop. Double-
click the icon to open it.
• The calculator drive represents calculator’s storage memory.
5. Perform the required operation on your computer to transfer the data.
• For details about data transfer operations, see “Transferring Data between the Calculator
and a Personal Computer” (page 13-4).