User Manual

6-33
Perform the following key operations from the statistical data list.
3(TEST)
5(ANOV)
The following is the meaning of each item in the case of list data specification.
How Many ..... selects One-Way ANOVA or Two-Way ANOVA (number of levels)
Factor A ........ category list (List 1 to 26)
Dependnt ...... list to be used for sample data (List 1 to 26)
Save Res ...... first list for storage of calculation results (None or List 1 to 22)*
1
Execute ......... executes a calculation or draws a graph (Two-Way ANOVA only)
*
1
[Save Res] saves each vertical column of the table into its own list. The leftmost column
is saved in the specified list, and each subsequent column to the right is saved in the next
sequentially numbered list. Up to five lists can be used for storing columns. You can specify
an first list number in the range of 1 to 22.
The following item appears in the case of Two-Way ANOVA only.
Factor B ........ category list (List 1 to 26)
After setting all the parameters, use c to move the highlighting to “Execute” and then press
one of the function keys shown below to perform the calculation or draw the graph.
• 1(CALC) ... Performs the calculation.
• 6(DRAW) ... Draws the graph (Two-Way ANOVA only).
Calculation results are displayed in table form, just as they appear in science books.
Data and Calculation Result Example
One-Way ANOVA Two-Way ANOVA
Data List1={1,1,2,2}
List2={124,913,120,1001}
List1={1,1,1,1,2,2,2,2}
List2={1,1,2,2,1,1,2,2}
List3={113,116,139,132,133,131,126,122}
Setup
Screen