User Manual

1-22
*
3
After highlighting the calculation result line you want to copy and before performing step 3 of
the procedure, you can use the key operation below to change the calculation result display
format. The display format of a copied result is the one in effect when you press w in step 3.
- Fraction, root, π format, and decimal: f (pages 1-23, 2-21)
Example:
→
f
←
↓
w
↓
w
- Improper fraction and mixed fraction: f(F) (page 2-21)
- Sexagesimal: K6(g)5(ANGL)5(
° ’ ”
) (page 2-14)
- ENG: K6(g)6(g)1(ESYM)6(g)6(g)2(ENG) (pages 2-14, 2-21)
- ENG: K6(g)6(g)1(ESYM)6(g)6(g)3(ENG) (pages 2-14, 2-21)
*
4
In the cases below, copying is not performed when w is pressed.
(a) If the calculation result you selected in step 3 is one that cannot be copied (list, matrix,
vector, or other special format calculation result)
(b) If the calculation result you selected in step 3 is a type of value or format that cannot be
input to the copy destination
(c) If the copied result exceeds the number of allowable bytes of the copy destination
In the case of (b) and (c), the content will not be copied to the cursor position, but the
content you selected will be copied to the clipboard.
k Calculation Operations in the Math Input/Output Mode
This section introduces Math input/output mode calculation examples.
• For details about calculation operations, see “Chapter 2 Manual Calculations”.
u Performing Function Calculations Using Math Input/Output Mode
Example Operation
=
4×5
6
10
3
=
3
π
2
1
( )
cos
(Angle: Rad)

A6 '4 *5 w
Ac(!5( π )'3 e)w
log
2
8 = 3
123 = 1.988647795
7
2 + 3 ×
3
64 − 4 = 10
A4(MATH) 2(log
a
b) 2 e8 w
A!M(
x
') 7 e123 w
A2 +3 *!M(
x
') 3 e64 e-4 w